Systems Engineer – Motor Module Integration
Found in: Resume Library US A2 - 1 week ago
Electric Boat is preparing to execute a construction and test program for the COLUMBIA Class Integrated Power Systems (IPS) at the IPS Compatibility Test Facility (CTF) in Philadelphia, PA. The IPS includes the propulsion plant (electric drive) and electrical power distribution system. Electric Boat has been tasked with outfitting the space to integrate and test the lead ship motor module. Following that program, the site will be used to test all subsequent COLUMBIA Class motor modules. Outfitting of the motor modules will occur at the Electric Boat Quonset Point facility as well as possible focus factories in the future. A pre-production integrated test program of prototypic equipment is in progress at the IPS CTF and on-going through the start of the motor module test program.
Key Tasks
Review and approval of design deliverables received from the Government and sub vendors which document the capabilities of existing facilities where COLUMBIA Class motor modules will be tested
Support Electric Boat development of design deliverables from every technical discipline (e.g. structural, mechanical, electrical) for modification of the COLUMBIA Class design to facilitate construction and test evolutions within the Electric Boat shipyard and Government test facilities
Management of commercial vendors finalizing the design of test facilities at Government shipyards and test facilities where portions of the COLUMBIA Class submarine will be built or tested
Review and approval of commercial vendor technical deliverables
Construction support and technical problem resolution of emergent issues during the outfitting of the IPS CTF in preparation for testing of COLUMBIA Class submarine equipment
Development of system designs for COLUMBIA Class IPS equipment integration
Completion of electrical design products in the IPDE tool
Development of formal correspondence
Sub vendor contract and performance management
Interface with external and internal customers to ensure program documents meet the intent of installations and testing
Support analysis, troubleshooting, and resolution of issues discovered during module outfitting, installation, removal, and during the test program
Work travel is periodically required as well as airline travel to CONUS and OCONUS destinations
Qualifications:
Required:
Bachelor of Science degree or higher in Engineering
Must be able to obtain and maintain a security clearance through the department of defense
Internal candidates must be from outside of operations (Casciano/Gabriel)
Preferred:
Testing experience
Construction support experience
Vendor management experience
Electrical engineering degree
Engineering construction support and troubleshooting experience
Familiarity and experience with the COLUMBIA Class IPS system
MS in an engineering discipline
Previous Naval Nuclear Propulsion Program experience
-
IPS CTF Test Engineer
Found in: Resume Library US A2 - 1 week ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Electric Boat is preparing to execute a construction and test program for the COLUMBIA Class Integrated Power Systems (IPS) at the IPS Compatibility Test Facility (CTF) in Philadelphia, PA. The IPS includes the propulsion plant (electric drive) and electrical power distribution system. Electric Boat has been tasked with outfitting the space to...
-
Experienced Engineer
Found in: Resume Library US A2 - 1 day ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: General Dynamics Electric Boat (GDEB) is seeking talented engineers to design, construct, and maintain the world’s most capable submarines on behalf of the United States Navy. Our submarines must outperform our adversaries while surviving the most extreme environments on Earth. With your support we will deliver the advantage that protects our...
-
Main Propulsion Motor
Found in: Resume Library US A2 - 1 week ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Overview Department 489 – COLUMBIA Class Integrated Power Systems (IPS) - is looking for a highly motivated and dynamic engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class...
-
Systems Engineer
Found in: Resume Library US A2 - 6 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: The Electrical Digital Enterprise group is a small team of engineers dedicated to support the Electrical Design and Engineering departments for the Columbia, Virginia Payload Module, and Virginia programs. This position requires interfacing with users of custom software applications developed for the design of numerous classes of submarines....
-
D428 CLB Electrical Systems Engineer
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Department 428 Electrical Systems is looking for highly motivated entry-level engineers to the fill engineering positions in the Data (instrumentation), Voice (Integrated Voice Communications System), and Auxiliary Systems (Motor Controllers/Galley equip./SPU). The D428 Data, Voice, and Auxiliary Communication Systems Group is a COLUMBIA Program...
-
Main Propulsion Motor
7 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewOverviewDepartment 489 - COLUMBIA Class Integrated Power Systems (IPS) - is looking for a highly motivated and dynamic engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class...
-
Engineer - Systems
Found in: Resume Library US A2 - 9 hours ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Department 440: Payload Launch Control Systems Engineering group supporting VIRGINIA Undersea Dominance programs. Department 440 has a systems engineering team supporting Undersea Dominance submarine programs. The systems engineering team is responsible for the development of new payloads and technologies that give our submarines global...
-
Payload System Engineer
Found in: Resume Library US A2 - 2 weeks ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Electric Boat’s Platform Systems Engineering department provides systems engineering and integration support to the VIRGINIA, Subsea and Seabed Warfare, COLUMBIA, and SSN(X) submarine design programs. We also support other integration efforts including: TOMAHAWK, Conventional Prompt Strike, Special Operations Forces, and UUVs/UAVs. Platform...
-
Engineer - Comm Systems
Found in: Resume Library US A2 - 2 weeks ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: D440 SSN Payload Launch Control SSN Payload Launch Control - Tactical Electronic Systems is seeking candidates competent in electrical engineering and those able to manage projects independently. The Tactical Electronic Systems group is responsible for developing all electronic hardware for the control of horizontal and vertical payloads...
-
Engineer Senior/Specialist
Found in: Resume Library US A2 - 9 hours ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: The Payload Launch Control and Onboard Trainers Engineering Department 440 applies highly diversified skills to produce weapon and payload launching electronics for US Navy nuclear submarines. The VIRGINIA (VA) Systems Integration Group is responsible for Payload Support Electronics System (PSES) project and task management, system engineering,...
-
Electrical / Mechanical Engineer - Systems
Found in: Resume Library US A2 - 1 week ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Electrical / Mechanical Systems Engineer – The Integrated Power Systems team in (Department 489) is seeking to add new engineering talent to support detailed design and new technology development for the All Electric Navy. The core focus of this group is electric drive propulsion component integration, development, test, and delivery to meet the...
-
Engineer I
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Department 428 Energy Storage is responsible for the VIRGINIA Class and COLUMBIA Class design, development, qualification, integration, and testing for the main storage battery. The Energy Storage group supports submarine construction, lifecycle of in service classes, as well as the development of future energy storage technologies and future...
-
D430 Strategic Weapons Systems Engineering
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Strategic Weapons Systems Engineering Electronic Systems Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes. Department 430 offers a flexible work...
-
Electrical Test Engineer Sr
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Shipyard Test Organization (D272) is seeking highly motivated candidates to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials. The successful candidate will be skilled in the proper planning and...
-
D430 Strategic Weapons Systems Engineering
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: D430 Strategic Weapons Systems Engineering Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes. Department 430 offers a flexible work arrangement that allows...
-
Experienced Engineer
Found in: Resume Library US A2 - 1 week ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Engineers in the Ship Signatures Department are responsible for ensuring that the ship's components, systems and structures are designed and built to meet a submarine's challenging radiated noise requirements. There are five major functional areas in Ship Signatures: Ship Signatures Structural Acoustics Ship Signatures Structural...
-
Fiber Optics Engineer
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: The Fiber Optic team is responsible for the design, development, qualification, integration, and testing of the Fiber Optic Cable System (FOCS) on TRIDENT, VIRGINIA and COLUMBIA Class submarines. In addition to owning the ‘whole boat’ fiber optic backbone on modern submarines, the fiber optic team is also Electric Boat’s Fiber Optic Center...
-
Electrical Systems Embedded Software Engineering
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: Department 425, Electrical Systems Embedded Software Engineering, engineers apply software and computer engineering skills to specify, design, develop, integrate, and test, as well as subcontract manage software development for US Navy Nuclear Submarines. Collaborating with systems, hardware, and test engineers, software is developed, tested and...
-
Electrical Systems and Components Engineer
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: D429 Electrical Systems and Components Engineer Opportunities are available in D429 for electrical system and component engineers. Successful candidates will be joining a strong and experienced engineering team in an exciting and fast-paced environment focused on designing power distribution, reactor plant, steam plant, and electric plant...
-
Engineering Supervisor
Found in: Resume Library US A2 - 7 days ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: The purpose of a supervisor at Electric Boat is to deliver and improve the results of their team, and to lead and develop their people. Electric Boat “Dives Deeper” to develop the best talent and achieve the best results. Developing high performers includes:Upholding values Collaborating with others and teamwork Developing...