Sheet Metal Foreman

6 days ago

Charlotte, North Carolina, United States SPC Mechanical Full time

Job Summary:

Responsible for Sheetmetal construction field installation activities with an emphasis on labor productivity, quality, and timely installations, and teamwork. This requires close coordination with the project team. The position is responsible for jobsite safety.

Responsibilities:

  • Follows all rules and procedures required by SPC; ensures Sheetmetal staff follow procedures and policies.

  • Communicate with contractors on various projects to ensure they achieve quality work in a timely manner.

  • Communicates with SPC staff and provides feedback to staff regarding the status of the project.

  • Instructs Sheetmetal staff in the techniques and procedures employed in the Sheetmetal trade.

  • Plans, assigns, and reviews the work of the sheet metal staff engaged in the installation, modification, and/or repair of Sheetmetal systems.

  • Inspects work upon completion to determine that staff followed the necessary operations and that work conforms to specifications.

  • Acts as a working supervisor in cutting, assembling, and installing ductwork. This includes:

Single and double wall round and flat oval spiral or flanged, standing S, slip and drive rectangular or round snap lock, and flexible duct

  • Capable of sealing the duct to achieve the specified duct sealing requirements

  • Good understanding of the duct pressure classifications

  • Capable of performing HVAC air duct leakage test with little assistance

  • Ability to field measure and order duct. o Assist with daily reports.

Qualifications:

  • Minimum of 10 years industrial/commercial Sheetmetal experience.

  • Ability to read and interpret documents.

  • Ability to write routine reports and correspondence.

  • Ability to solve practical problems and deal with a variety of variables in situations.

  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schematic form.

  • Ability to work with mathematical concepts such as probability, statistical inference, and the fundamentals of plane and solid geometry.

  • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Tools Required:

  • Reciprocating Saw (Cordless)

  • Nibblers (Cordless)

  • Impact Drill (Cordless)

  • Drill / Driver (Cordless)

  • Sheetmetal Hammer

  • Right and left-handed snips

  • Duct Tongs (Benders)

  • Duct Crimper

  • Bill Dog Snips

  • Screwdriver Set

  • Tape Measure

  • Torpedo Level and Two Foot Level

  • Magnetic Hex Drivers ¼" – 3/8"

  • 12" Folding Tool

  • Tie Banding Tool for Plastic Straps

  • Divider Measuring circles for drawing fittings

  • Duct knife for insulation

  • Wire Cutters (Side Cutters)

Work Environment:

While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts and the risk of electrical shock. The employee is occasionally exposed to high, precarious places, outside weather conditions, and vibration / loud noise.

The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions.

While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel, reach with hands and arms, climb or balance, stand, walk, sit, stoop, kneel, crouch, or crawl, and talk or hear. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.

  • Sheet Metal Mechanic

    6 days ago

    Charlotte, North Carolina, United States Southeastern Plumbing and Heating Full time $101,600 - $203,200 per year

    Commercial & Industrial HVAC Installers / Foremen - Sheet Metal MechanicLocation: Charlotte, NCCompany: Southeastern Plumbing, Heating & A.C.Southeastern is growing — and we're looking for motivated, career-minded leaders to join our Commercial and Industrial HVAC installation team.We're a third-generation mechanical contractor with over 63 years serving...

  • Commercial Construction Foreman

    4 days ago

    Charlotte, North Carolina, United States Metcon Full time $60,000 - $120,000 per year

    About MetconMetcon, Inc. is an award-winning commercial construction company recognized for innovation, safety, and craftsmanship across a wide range of markets — including education, healthcare, industrial, and commercial facilities. With a commitment to excellence and integrity, Metcon builds more than just structures — we build lasting relationships...

  • Roofer Commercial

    6 days ago

    Charlotte, North Carolina, United States Tradewinds Support Partners Full time $45,000 - $65,000 per year

    Job description: For prevailing wage jobs must pass background check with fingerprint submission.Qualifications • Reliable form of transportation • Acceptable background check per company standards - Must pass PA State, FBI and Child Abuse clearances • Ability to pass a pre-employment drug screen • Weekends as needed • Experience required in the...

  • Assistant Superintendent- Special Projects

    6 days ago

    Charlotte, North Carolina, United States Swinerton Full time $80,000 - $120,000 per year

    Job Description Summary:Plan, organize, and direct activities concerned with the construction and maintenance of structures, facilities, and systems resulting in successful project completion.Job Description:POSITION RESPONSIBILITIES AND DUTIES:• Able to perform all essential Project Engineer job responsibilities• Confer with supervisory personnel,...

  • Sheet Metal Mechanic

    11 hours ago

    Charlotte, United States Tradesmen International, LLC Full time

    Read & interpret blueprints. Measure, cut & hang sheet metal ductwork. Complete installs. Other tasks as assigned Requirements 3 years of commercial sheet metal experience. All sheet metal tools Sheet Metal, Mechanic, Metal, Manufacturing, Construction

  • Sheet Metal Mechanic

    3 weeks ago

    Charlotte, United States Charlotte Staffing Full time

    Sheet Metal Mechanics OpportunityTradesmen International is immediately hiring experienced Sheet Metal Mechanics of all skill levels for projects located in the Charlotte, NC area. This is a first shift opportunity, and the pay rate is up to $30/hour based on experience and skill level. If you are a Sheet Metal Mechanic and want to work alongside other...

  • Sheet Metal Technician

    3 weeks ago

    Charlotte, United States Charlotte Staffing Full time

    Commercial Sheet Metal TechnicianThe Commercial Sheet Metal Installer is tasked with fabricating, assembling, and installing sheet metal components essential for commercial HVAC systems, ductwork, and related structures. This role demands precision, strict adherence to safety standards, and the capability to work on-site across various commercial...

  • Sheet Metal Technician

    4 weeks ago

    Charlotte, United States Aerotek Full time

    Sheet Metal TechnicianThe Commercial Sheet Metal Installer is tasked with fabricating, assembling, and installing sheet metal components essential for commercial HVAC systems, ductwork, and related structures. This role demands precision, strict adherence to safety standards, and the capability to work on-site across various commercial...

  • Sheet Metal Technician

    3 weeks ago

    Charlotte, United States Charlotte Staffing Full time

    Commercial Sheet Metal TechnicianThe Commercial Sheet Metal Installer is tasked with fabricating, assembling, and installing sheet metal components essential for commercial HVAC systems, ductwork, and related structures. This role demands precision, strict adherence to safety standards, and the capability to work on-site across various commercial...

  • Sheet Metal Technician

    3 weeks ago

    Charlotte, United States Aerotek Full time

    Aerotek - JobID: JP-005651195 [Production Operator / Assembly Line Worker] As a Sheet Metal Technician at Aerotek, you'll: Perform assembly of components, part marking, sizing, and aligning; Prepare parts for welding, and prep parts for painting; Use tool hardware such as bolts, nuts, screws, rivets, nut plates, and other hardware; Utilize material and...

  • Sheet Metal Mechanic

    4 weeks ago

    Charlotte, United States Charlotte Staffing Full time

    Sheet Metal MechanicWe are seeking skilled Sheet Metal Mechanics and Lead Mechanics with over 3 years of experience. The roles are available across multiple sites, including Lynchburg and Hampton Sydney College. Candidates will be responsible for a variety of tasks, from reading blueprints to leading teams, and will be working on projects with durations...

  • Sheet Metal Mechanic

    3 weeks ago

    Charlotte, United States Tradesmen International Full time

    Tradesmen International - JobID: 4ACC25093748490FBCEE6987AD3C7C62 [Installation / Fabricator] As a Sheet Metal Worker at Tradesmen International, you'll: Consistently meet and exceed deadlines for assigned tasks; Consistently produce parts that meet and exceed quality standards as determined by the Production Supervisor and/or Quality Inspector; Perform set...

  • Drywall Foreman

    1 day ago

    Charlotte, United States Turner Construction Company Full time

    Division: CarolinasProject Location(s): Charlotte, NC 28201 USAMinimum Years Experience: Travel Involved: Job Type: RegularJob Classification: TradeEducation:Job Family:TradeCompensation:Non-Union TradePosition Description: Plan, organize, supervise, and complete drywall projects and related tasks for building construction projects. Lead, direct, and...

  • Laborer Foreman

    1 week ago

    Charlotte, NC, United States Turner Construction Full time

    Division: CarolinasProject Location(s): Charlotte, NC 28201 USAMinimum Years Experience: Travel Involved:Job Type: Regular Job Classification: Trade Education: Job Family: Trade Compensation: Non-Union Trade Position Description: Plan, organize, supervise, and complete labor projects and/or assignments. Lead, direct, and coordinate work of Turner...