Welder in Training

1 week ago

Batavia, NY, United States Graham Corporation Full time

Job Type

Full-time

Description

This position includes enrollment in our 20-week, Arc & Flame Training Program in Rochester, NY. The $11,000 training cost is covered. Compensation and benefits begin at the start of your training date.

Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate.

Key Results Areas by level of work

Level I: Quality - Complete and accurate work performed efficiently

1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed

  • Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly.
  • Investigates special welding instructions to conform to Quality Assurance requirements.
  • Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing.
  • Visually examines completed weld for size of bead, penetration and quality.
  • Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs.
  • In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment.
  • Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories.
  • Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions
  • Consistently meets customer's quality requirements and expectations.
2. Follow instructions - oral and/or written
  • Can properly read all blueprint and work instructions
  • Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
  • Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate.
3. Safety & housekeeping
  • Work may require use of scaffold, ladders, forklift, and/or scissor lift.
  • Work may require the use of a crane to move part.
  • Maintains a clean work area with no clutter.
  • Practices safety at all times while at work.
  • Follows safety policies and procedures and speaks up when others are non-compliant.
  • Wears all safety equipment for area of work.
4. Continual Improvement suggestions
  • Keeps an open mind to others continuous improvement suggestions
  • Bring continuous improvement suggestions to the appropriate team member.
5. Professional Development
  • Demonstrates initiative, positive attitude, and enthusiasm for the job
  • Will follow up with supervisor on professional development goals and opportunities
  • Takes an interest and lets it be known that they have a desire to grow with the company


Qualifications:

To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.

Education and Training

• Technical Trades School in Welding

• High school GED Required

Experience:

• 1+ years of welding experience.

Other:

• Must be willing to work overtime as required.

• Minimal travel may be required

Skills:

To perform the job successfully, an individual should demonstrate the following competencies:

1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.

2. Strong organization and time management skills.

3. High attention to detail.

4. Demonstrate behavior consistent with company values.

5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.

6. Exhibits polite and professional communication via phone, e-mail and mail.

7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.

8. Maintain a collaborative relationship with internal and external stakeholders.

9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.

10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.

11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.

12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.

13. Ability to thrive in a team environment.

Physical and Mental Demands

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.

• Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.

• Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.

Work Authorization

Must be able to work in the U.S without sponsorship.

Salary Description

$21.62/hr

  • Welding/Fabrication Set Up

    1 week ago

    Batavia, NY, United States Graham Corporation Full time

    Description Position Summary: Working from drawings, specifications, bills of material, material specifications, welding instructions and codes, sets up, fits, clamps, bolts and tack welds diversified structural and weldment assemblies in accord with dimensional and alignment requirements. Requires knowledge of welding technology in addition to welding...

  • Inspector NDE II RT

    1 week ago

    Batavia, NY, United States Graham Corporation Full time

    Job Type Full-time Description Job Title: Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Technician Division/Department: GHM/Quality Level of Work: Level I Position Summary: The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and...

  • Inspector NDE II RT

    2 weeks ago

    Batavia, NY, United States Graham Corporation Full time

    Job Type Full-time Description Job Title: Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Technician Division/Department: GHM/Quality Level of Work: Level I Position Summary: The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and...

  • Welder

    1 week ago

    Batavia, OH, United States Aerotek Full time

    Welder------->25-32/hr Job Description This role involves welding on steel enclosures that house diesel generators and diesel fuel oil supply tanks. Responsibilities include layout, fitting, and MIG welding on mild steel. You must be able to read and interpret blueprints, shop drawings, and use a tape measure effectively from the first...

  • Mobile Structural Welder

    2 weeks ago

    Batavia, IL, United States Robinson Construction Full time

    Job Summary: Join our dedicated team as a Mobile Structural Welder, where you will play a crucial role in bringing projects to life through your welding expertise. We are seeking a skilled professional who can read and interpret project plans, blueprints, and diagrams to ensure high-quality and safe installations. Responsibilities: Interpret and execute...

  • Welder HIRING FOR ALL SHIFTS

    2 weeks ago

    Batavia, OH, United States Aerotek Full time

    Job Title: Welder Job Description This role involves welding on steel enclosures that house diesel generators and diesel fuel oil supply tanks. Responsibilities include layout, fitting, and MIG welding on mild steel. You must be able to read and interpret blueprints, shop drawings, and use a tape measure effectively from the first...

  • Welder HIRING FOR ALL SHIFTS

    2 weeks ago

    Batavia, OH, United States Aerotek Full time

    Job Title: Welder Job Description This role involves welding on steel enclosures that house diesel generators and diesel fuel oil supply tanks. Responsibilities include layout, fitting, and MIG welding on mild steel. You must be able to read and interpret blueprints, shop drawings, and use a tape measure effectively from the first...

  • Welder HIRING FOR ALL SHIFTS

    1 week ago

    Batavia, OH, United States Aerotek Full time

    Job Title: Welder Job Description This role involves welding on steel enclosures that house diesel generators and diesel fuel oil supply tanks. Responsibilities include layout, fitting, and MIG welding on mild steel. You must be able to read and interpret blueprints, shop drawings, and use a tape measure effectively from the first...

  • Welder

    2 days ago

    Batavia, United States Graham Corporation Full time

    Description Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production...

  • Sheet Metal Worker- 2nd Shift

    2 days ago

    Batavia, United States Milacron Full time

    Milacron is looking for a Sheet Metal Worker to join our team in Batavia, OH on 2nd shift. In this position, you will design, lay out, make templates, and fabricate sheet metal parts as required. Work You'll Do:Operate various shears, press brakes, spot welders, and other fabrication equipment as required to create sheet metal parts.Work to close tolerances...

  • Traveling Structural Welder

    2 weeks ago

    Batavia, IL, United States Robinson Construction Full time

    Reads and interprets project plans, blueprints and other written instructions and diagrams to perform task at hand. Performs Shielded Metal Arc Welding (SMAW) based on project needs. Field install welds, including duct work, light fixtures, vents, fans, metal sheeting and other parts. Selects proper fillers for jobs based on previous experience or project...

  • Sheet Metal Worker- 2nd Shift

    6 hours ago

    Batavia, United States Milacron Full time

    Sheet Metal WorkerMilacron is looking for a Sheet Metal Worker to join our team in Batavia, OH on 2nd shift. In this position, you will design, lay out, make templates, and fabricate sheet metal parts as required.Work You'll Do:Operate various shears, press brakes, spot welders, and other fabrication equipment as required to create sheet metal parts.Work to...

  • Assembler - Finishing

    2 weeks ago

    Batavia, OH, United States Aerotek Full time

    Assembler - Finishing Join our team as an Assembler - Finishing, where you will work with sheet metal pieces, measuring them into place, and performing small welds to tack them until the welders can finalize the product. Your role will also involve buttoning, bolting, gluing items to the final product, adding components to the enclosure, and touching up...