Gaging and Tooling Technician

1 week ago

St Stephen, SC, United States Acutec Precision Aerospace Inc. Full time

The successful employee will be responsible for management of gages across all facilities, including the operations of the gage lab personnel. Responsible for systematically tracking gaging to ensure it is calibrated to the frequency required by our quality system. Coordinate with outside service providers and customers to ensure any gaging sent out for calibration or review is done in a timely manner. Order new gaging as needed for new jobs or to replace existing gaging when approval is granted.

Essential Duties and Responsibilities

• Ensure correct gages are available and properly kitted for upcoming jobs; set-up tooling per instructions

• Assist inspection and operations teams with gaging needs.

• Perform all internal gage calibration processes.

• Set up of all gage types (Johnson, Sunnen, etc)

• Inspect and calibrate gaging (Acutec and employee owned) in a timely basis, per the required calibration schedules.

• Track the location of all gaging and ensure it is returned and issues in a timely manner.

• Track and monitor gages that are sent out for inspection.

• Request gages from Acutec customers when required.

• Clean gaging before returning to inventory or sending out to floor.

• Maintain and distribute an Out of Tolerance report and advise employees of personal gaging that is approaching an unacceptable condition.

• Tear down and sort tooling and place in appropriate location.

• Notify personnel of low inventory levels of tooling and tooling accessories.

• Provide tooling technical support to programmers and production personnel.

• Monitor durable tool inventory for excess and shortages, order replacement durables and dispose of unused durables as necessary.

• Communicate between vendors and coworkers to maintain continuity between shifts and proper inventory levels of tooling.

•

Key Roles

• Perform and supervise necessary calibration of gaging (internal and external) and maintenance of company and employee-owned gages.

• Maintain advanced knowledge of types, grades, and application usage of all used tooling.

• Advise programmer, team leads and operators of correct cutting data and application of cutting tools; track usage and location of gaging accurately, ensuring gages are available.

• Works well with internal customers (operations and quality teams) and suppliers

Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education & Experience Requirements:

• A high school education and three to nine months experience in a manufacturing environment, or equivalent education and experience.

• Strong math, algebra, geometry, and computer skills are required for this position.

• High mechanical aptitude.

• Ability to utilize various software packages related to the position

• Experience with tooling and gaging is preferred.

Required Knowledge and Skills:

The employee must possess the ability to communicate effectively with all internal and external customers in both written and oral form.

The employee must be very detail oriented.

Supervisory Responsibilities

Required to train and assist other employees.

Physical Demands

Work Environment

The work environment characteristics described here are representative of those the employee encounters while performing the functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently exposed to loud noises and sometimes chaotic conditions/situations. The employee also interacts with the plant manager, cell leaders, stoplight supervisor, secretary, shipping leader, and machine operators.

Safety and Policy Practices

The employee in this job must be knowledgeable in regard to the safety policies and procedures of the Company as described in the Company safety manual. The employee must adhere to all said policies and procedures while supporting the goals and objectives of the organization and recognize the Company's need to achieve its business objective.

  • HVAC Technician Helper

    4 days ago

    St Matthews, SC, United States Spires Heating and Air Full time

    Job Description Job Description Spires Heating and Air is hiring for a promising future! Start as a HVAC helper and pave your way to becoming a technician. Join our family - oriented team, where we value your growth. Enjoy above average pay, paid time off, company uniforms, and extensive training. No experience needed - we'll guide you every step of the way....

  • HVAC Technician Helper

    1 week ago

    St Matthews, SC, United States Spires Heating and Air Full time

    Job Description Job Description Spires Heating and Air is hiring for a promising future! Start as a HVAC helper and pave your way to becoming a technician. Join our family - oriented team, where we value your growth. Enjoy above average pay, paid time off, company uniforms, and extensive training. No experience needed - we'll guide you every step of the way....

  • HVAC Technician Helper

    1 week ago

    St Matthews, SC, United States Spires Heating and Air Full time

    Job Description Job Description Spires Heating and Air is hiring for a promising future! Start as a HVAC helper and pave your way to becoming a technician. Join our family - oriented team, where we value your growth. Enjoy above average pay, paid time off, company uniforms, and extensive training. No experience needed - we'll guide you every step of the way....

  • Gage Assembler

    2 weeks ago

    St. Louis, United States Sunnen Products Company Full time

    Sunnen Products Company was founded in 1924 by Joseph Sunnen. For the last 100 years, we have been a global leader in the manufacturing and distribution of bore sizing and finishing equipment, engine rebuilding equipment, and tooling and abrasives. We are seeking results-driven candidates that are interested in working for a company with a long legacy and a...

  • Gage Assembler

    4 days ago

    St Louis, MO, United States Sunnen Products Company Full time

    Sunnen Products Company was founded in 1924 by Joseph Sunnen. For the last 100 years, we have been a global leader in the manufacturing and distribution of bore sizing and finishing equipment, engine rebuilding equipment, and tooling and abrasives. We are seeking results-driven candidates that are interested in working for a company with a long legacy and a...

  • Gage Assembler

    1 week ago

    St Louis, MO, United States Sunnen Products Company Full time

    Sunnen Products Company was founded in 1924 by Joseph Sunnen. For the last 100 years, we have been a global leader in the manufacturing and distribution of bore sizing and finishing equipment, engine rebuilding equipment, and tooling and abrasives. We are seeking results-driven candidates that are interested in working for a company with a long legacy and a...

  • Repair and Tool Technician

    4 weeks ago

    St. Augustine, United States Home Depot (Retail) Full time

    Repair And Tool Technician6342 - WORLD COMMERCE CENTERJob DescriptionPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores...

  • Metrology Technician

    10 hours ago

    St. Johns, United States The Pivot Group Network Full time

    Metrology Technician | St. Johns, MI Salary Range: $55,000 - $82,000 depending on experience Are you ready to take on a challenging and rewarding opportunity in {{role_field}}? The Pivot Group is committed to building meaningful connections in manufacturing. We partner with leading companies in St. Johns seeking Metrology Technicians. The Opportunity We...

  • Manufacturing Tool Technician

    2 weeks ago

    St Louis, United States Air Products Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Tool Room Technician

    7 days ago

    St. Charles, United States Jasurda Group Full time

    Tool Room TechnicianLocation: St. Charles ILSchedule: 6:00am - 2:30pm (Monday - Friday)A privately owned international manufacturer in the plastic packaging space is expanding its tooling team and bringing on a full-time Tool Maker Journeyman. If you enjoy precision work solving mechanical challenges and keeping high volume production running at its best...

  • QC Technician

    2 weeks ago

    St Louis, Missouri, United States Sensient Careers Full time $60,000 - $90,000 per year

    At Sensient Technologies, we are experts in science, art, and innovation of color and flavor. We are market savvy and visionary. We are problem solvers, and we will be better with you. As a QC Technician you will have a strong customer focus who develops self and others. This exciting role is responsible for raw material and standardized test procedures...

  • 6 Spindle Screw Machine Operator

    2 weeks ago

    St Francis, WI, United States SITE Staffing Full time

    St Francis, WI 1st shift, M-F, 7am - 3:30pm $25 - $32 6 spindle New Britain Screw machines Set-up Operator Job Descriptions: The Six Spindle Screw Machine Set-Up Technician will be responsible for setting up and operating a Six Spindle New Britain cam & gear driven Screw Machine Lathe and operating/machining quality parts per blueprint. The technician is...

  • 6 Spindle Screw Machine Operator

    3 days ago

    St Francis, WI, United States SITE Staffing Full time

    St Francis, WI 1st shift, M-F, 7am - 3:30pm $25 - $32 6 spindle New Britain Screw machines Set-up Operator Job Descriptions: The Six Spindle Screw Machine Set-Up Technician will be responsible for setting up and operating a Six Spindle New Britain cam & gear driven Screw Machine Lathe and operating/machining quality parts per blueprint. The technician is...