CNC Lead Operator
16 hours ago
Job Summary:
Under general supervision, lead, train, assign and coordinate work in CNC Lathe area; demonstrate and explain machining techniques and work procedures; performs other related duties as assigned.
Reports to:
Machine Shop Manager
Examples of Duties and Responsibilities:
- Monitors assigned manufacturing operations within CNC lathe area;
- Sets up, operate CNC lathes and other related equipment;
- Requests purchases of tools and supplies;
- Review employee problems with department supervisor and manager;
- Works closely with CNC Programmer concerning programmed jobs;
- Expedites work as directed;
- Train operators how to operate jib crane and bridge crane to load and unload parts;
- Familiar with hitching and rigging equipment and their use;
- Participates in performance evaluations and reports performance infractions to supervisor and department manager;
- Performs other duties based on production requirements or needs of department management.
- Regular punctuality, attendance, and absence reporting in conformance with company policies is essential to the successful performance of this position; and
- Fully comply with company rules, policies, procedures, and safety guidelines to ensure safe and effective operations.
QUALIFICATIONS GUIDELINES:
Any combination equivalent of, but not limited to, the following:
Experience/Training/Education:
Considerable experience in CNC lathe operation in a machine shop setting; working knowledge of Jib cranes and Bridge type cranes. Working knowledge of machine shop operations and manufacturing practices; minimum high school diploma, supplemented by course work or training in leadership fundamentals.
Knowledge/Skills/Abilities:
- Able to analyze and solve machining and work process problems;
- Knowledge of CNC lathes, equipment set up and operation;
- Able to communicate effectively with employees and supervision both orally and in writing;
- Able to read and interpret instructions, schematics and manufacturing and engineering drawings;
- Able to train, develop and check the work of subordinates; and
- Knowledge of quality control inspection methods and casting layout work.
- Ability to operate jib crane and bridge crane; and
- Knowledge of safe hitching and rigging techniques to manipulate parts.
Physical Requirements:
- Ability to bend, reach, lift, move, and carry tools and materials weighing 25 pounds or less;
- Ability to reach and adjust equipment control settings; and
- Ability to perform essential functions of the job, as defined;
- Reasonable accommodations provided upon request.
Special Requirements:
Acceptable set of machinist's tools may be required; and
Safety shoes required.
Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.-
CNC Machine Operations Lead
7 days ago
Costa Mesa, California, United States Volt Full timeCNC Machine Lead Job DescriptionVolt is seeking a skilled CNC Machine Lead to oversee manufacturing operations within the CNC machine area. As a CNC Machine Lead, you will be responsible for leading and coordinating the activities of the team, setting up and operating CNC machines and other related equipment efficiently, and managing requests for tool and...
-
CNC Machine Operations Lead
4 days ago
Costa Mesa, California, United States Volt Full timeJob OpportunityVolt is seeking a skilled CNC Machine Lead to join our team in Costa Mesa, CA.Key Responsibilities:Leadership and Coordination: Oversee manufacturing operations within the CNC machine area, leading and coordinating the activities of the team.Machine Operation: Set up and operate CNC machines and other related equipment efficiently.Resource...
-
CNC Machine Operations Lead
3 weeks ago
Costa Mesa, California, United States Volt Full timeJob Summary:Volt is seeking a highly skilled CNC Machine Operations Lead to oversee the daily operations of our manufacturing floor. As a key member of our team, you will be responsible for ensuring the efficient and effective operation of our CNC machines and equipment.Key Responsibilities:Leadership and Coordination: Supervise and coordinate the activities...
-
Manufacturing Lead
3 weeks ago
Costa Mesa, California, United States Volt Full timeJob Summary:Volt is seeking a highly skilled CNC Machine Lead to oversee the daily operations of our CNC machine department. As a key member of our team, you will be responsible for ensuring the efficient and effective operation of our CNC machines, as well as leading and coordinating the activities of our team members.Key Responsibilities:Leadership and...
-
CNC Machine Lead 2nd
1 week ago
Costa Mesa, United States Volt Full timeJob DescriptionJob DescriptionVolt is immediately hiring for CNC Machine Leads for a company located in Costa Mesa, CA.As an CNC Machine Lead you will:Leadership and Coordination: Monitors manufacturing operations within the CNC machine area, leading and coordinating the activities of the team.Machine Operation: Sets up and operates CNC machines and other...
-
CNC Machine Operations Manager
2 weeks ago
Costa Mesa, California, United States Volt Full timeCNC Machine Lead Job DescriptionVolt is seeking a skilled CNC Machine Lead to oversee manufacturing operations within the CNC machine area. As a CNC Machine Lead, you will be responsible for leading and coordinating the activities of the team, ensuring efficient machine operation, and managing resources effectively.Key Responsibilities:Leadership and...
-
CNC Machine Operations Manager
3 weeks ago
Costa Mesa, California, United States Volt Full timeJob Summary:Volt is seeking a highly skilled CNC Machine Lead to oversee the daily operations of our manufacturing floor. As a key member of our team, you will be responsible for ensuring the efficient and effective operation of our CNC machines, as well as leading and coordinating the activities of our production team.Key Responsibilities:Leadership and...
-
CNC Machine Operations Manager
3 weeks ago
Costa Mesa, California, United States Volt Full timeJob Summary:Volt is seeking a highly skilled CNC Machine Lead to oversee the daily operations of our manufacturing floor. As a key member of our team, you will be responsible for ensuring the efficient and safe operation of our CNC machines and equipment.Key Responsibilities:Leadership and Coordination: Supervise and coordinate the activities of the...
-
CNC Machine Operations Manager
3 weeks ago
Costa Mesa, California, United States Volt Full timeJob OverviewVolt is seeking a highly skilled CNC Machine Lead to oversee the daily operations of our manufacturing floor. As a key member of our team, you will be responsible for ensuring the efficient and effective production of high-quality products.Key ResponsibilitiesLeadership and Coordination: Supervise and coordinate the activities of the...
-
CNC Lathe Operator
2 days ago
Costa Mesa, United States AtWork Group Full timeJOB DIMENSIONS: 2nd shift 1: 30 m to 10pm CNC VTL Operator payrate $28-$33 DOEJob Summary:Under moderate supervision, sets up, operates, adjusts, and edits programs on CNC VTL and related equipment; checks work for conformity with work specifications and quality standards; and performs related duties, as assigned.Reports to:Machine Shop SupervisorExamples of...
-
CNC Lathe Operator
2 days ago
Costa Mesa, United States AtWork Group Full timeJOB DIMENSIONS: 2nd shift 1: 30 m to 10pm CNC VTL Operator payrate $28-$33 DOE Job Summary: Under moderate supervision, sets up, operates, adjusts, and edits programs on CNC VTL and related equipment; checks work for conformity with work specifications and quality standards; and performs related duties, as assigned. Reports to: Machine Shop Supervisor...
-
CNC Lathe Operator
2 days ago
Costa Mesa, United States AtWork Group Full timeJOB DIMENSIONS: 2nd shift 1: 30 m to 10pm CNC VTL Operator payrate $28-$33 DOEJob Summary:Under moderate supervision, sets up, operates, adjusts, and edits programs on CNC VTL and related equipment; checks work for conformity with work specifications and quality standards; and performs related duties, as assigned.Reports to:Machine Shop SupervisorExamples of...
-
CNC Machining Team Leader
4 weeks ago
Costa Mesa, California, United States OneCruit LLC Full timeJob Overview***SEEKING EXPERIENCED CNC MACHINE LEADS FOR BOTH 1ST AND 2ND SHIFT***Position Summary:Under general oversight, the CNC Machine Lead is tasked with guiding, instructing, delegating, and orchestrating workflow. This position entails showcasing and clarifying machining methodologies and operational procedures while executing additional...
-
CNC Lathe Machinist
4 weeks ago
Costa Mesa, California, United States Amtec Contract Full timeJob OverviewReporting to: Machine Shop ManagerKey Responsibilities:Oversee designated manufacturing processes within the CNC lathe section;Set up and operate CNC lathes along with other associated machinery;Initiate requests for the procurement of tools and materials;Address employee concerns in collaboration with the department supervisor and...
-
CNC Machinist
16 hours ago
Mesa, United States Express Employment Professionals Full timeJob DescriptionJob DescriptionJob Title: CNC Operator (Semiconductor Manufacturing)Location: Tempe, AZSchedule: Monday - Friday, 5:00 AM - 2:00 PM / 6:00 AM - 3:00 PMPay: $30-$35/hour (DOE)Job Description: We are seeking a skilled CNC Operator with experience in operating Haas Mills for a semiconductor manufacturing company in Tempe. The ideal candidate will...
-
CNC Lathe Operator
6 hours ago
Costa Mesa, CA, United States AtWork Group Full timeJOB DIMENSIONS: 2nd shift 1: 30 m to 10pm CNC VTL Operator payrate $28-$33 DOEJob Summary:Under moderate supervision, sets up, operates, adjusts, and edits programs on CNC VTL and related equipment; checks work for conformity with work specifications and quality standards; and performs related duties, as assigned.Reports to:Machine Shop SupervisorExamples of...
-
CNC Programmer
1 day ago
Mesa, United States Foresight Technologies Full timeJob DescriptionJob DescriptionDescription:CNC Programmer/Manufacturing EngineeringWe are expanding our operations and looking for a highly skilled and dedicated individual. If you consider yourself to be highly skilled CNC Programmer with exceptional work ethics, take pride in your work and want to work in a fast paced, air-conditioned, clean and organized...
-
CNC Machinist Programmer and Operator
4 weeks ago
Mesa, Arizona, United States DD26 Fishing Full timeJob OverviewWe are seeking a skilled CNC Machinist Programmer and Operator with expertise in operating HAAS machines for 3-axis, 4-axis, and 5-axis milling. The ideal candidate will also have experience in CNC turning with live tooling, sub spindle, and bar feeder, specifically on the DOOSAN Lynx 2100.Key Responsibilities:Utilize Fusion 360 for CAD design...
-
CNC Technician
16 hours ago
Mesa, United States Express Employment Professionals Full timeJob DescriptionJob DescriptionJob Title: CNC Technician (Travel Required)Location: Based in Mesa, AZ (Travel throughout AZ and parts of Mexico)Schedule: VariesJob Description: We are seeking an experienced CNC Technician to travel to manufacturing facilities throughout Arizona and occasionally parts of Mexico to provide technical troubleshooting and...
-
CNC Machinist II
8 hours ago
Mesa, Arizona, United States Inter-Coastal Electronics, LLC Full timeJob SummaryWe are seeking a highly skilled CNC Machinist II to join our team at Inter-Coastal Electronics, LLC. As a CNC Machinist II, you will be responsible for creating parts and tools by setting up and operating CNC lathes, power mills, or other machinery according to written plans or work orders.Key ResponsibilitiesPlan and program machining operations...