Welder - Fabrication Specialist

1 week ago

Richmond Heights, Virginia, United States Alamo Group Full time
Job Summary

We are seeking a skilled Welder to join our team at Alamo Group. As a Welder, you will be responsible for laying out, fitting, and welding fabricated steel frames and/or metal parts on our production floor using welding equipment.

Key Responsibilities
  • Lay out, fit, and weld fabricated steel frames and/or metal parts on production floor using welding equipment.
  • Measure and mark locations for metal components on assembly table following blueprints.
  • Verify position of metal components in assembly using straight edge, combination square, and rule.
  • Adjust and use torch and plasma cutter and/or grinder properly in standard/non-standard positions following engineering drawings.
  • Weld in vertical, flat, horizontal, or overhead positions.
  • Use basic hand tools, such as tape measure, square, clamps, etc., to verify proper weld application and quality of weldments.
  • Examine work piece for defects and ensure conformance with specifications.
  • Weld out components previously tack welded by experienced welders.
  • Prep and finish metal components by grinding or sanding.
  • Operate material handling equipment. Operate overhead crane/hoist.
  • Responsible for movement of material or product and proper storage.
Requirements
  • Experience in MIG and TIG welding.
  • Ability to read and understand English.
  • Capable of performing standard measurements. Ability to read a tape measure in American measurements; ability to use other measuring devices.
  • Ability to read drawings and sketches.
  • Ability to adhere to company safety expectations and wear required Personal Protective Equipment (PPE).
  • Ability to multitask in fast-paced environment.
  • Ability to work alone and as part of a team.
  • Good math skills.
  • Mechanical aptitude.
  • Understands basic procedure of voltage and amp settings for given requirements.
Working Conditions
  • Use hands or fingers to handle or feel.
  • Reach with hands and arms.
  • Good Hearing.
  • Lift, pull, and push up to 50 pounds without assistance.
  • Lift, pull, and push up to 51 to over 100 pounds with assistance.
  • Stand, walk on a concrete surface.
  • Climb up to 4 feet.
  • Stoop, kneel, crouch, or crawl.
  • Work in wet or humid conditions (non-weather).
  • Work near moving mechanical parts.
  • Work around fumes or airborne particles.
Education and Experience
  • High school diploma or GED certificate preferred. Equivalent combination of education and experience.
  • Previous education in or minimum of one year working in a metal fabrication-manufacturing environment. Vocational education in welding may contribute to experience.
  • Fab shop and welding experience a plus.
  • Experience with JD Edwards helpful.

  • Welder - Fabrication Specialist

    5 days ago

    Richmond Heights, Virginia, United States Alamo Group Full time

    Job SummaryWe are seeking a skilled Welder - Fabrication Specialist to join our team at Alamo Group. As a key member of our manufacturing department, you will be responsible for laying out, fitting, and welding fabricated steel frames and/or metal parts on our production floor.Key ResponsibilitiesLay out and fit fabricated steel frames and/or metal parts on...

  • Welder - Fabrication Specialist

    5 days ago

    Richmond, Virginia, United States Alfa Laval Full time

    About the RoleWe are seeking a skilled Welder to join our team at Alfa Laval's Richmond manufacturing facility. As a Welder, you will play a critical role in the fabrication of pumps and valves made from stainless steel.Key ResponsibilitiesRead and interpret blueprints to lay out, fit, and weld fabricated, cast, and forged components to various parts of...

  • Welder I

    5 days ago

    Richmond, Virginia, United States Alfa Laval Full time

    Job SummaryWe are seeking a skilled Welder I to join our team at Alfa Laval. As a Welder I, you will be responsible for fabricating and assembling metal components into parts for equipment, using hand welding and flame cutting equipment such as arc welders, gas welders, and gas torches.Key ResponsibilitiesRun production processes according to Safety &...

  • Welder - Fabrication Specialist

    7 days ago

    Richmond, Virginia, United States Alfa Laval Full time

    About the RoleWe are seeking a skilled Welder to join our Richmond manufacturing facility. As a key member of our team, you will be responsible for fabricating and welding components for our pumps and valves.Key ResponsibilitiesRead and interpret blueprints to ensure accurate fabrication and weldingOperate manual or semi-automatic welding equipment to fuse...

  • Welder - Fabrication Specialist

    1 week ago

    Richmond, Virginia, United States Super Radiator Coils Full time

    About the RoleWe are seeking a skilled and experienced Welder to join our manufacturing team at Super Radiator Coils. As a key member of our production team, you will be responsible for fabricating and assembling metal components to create high-performance coils and heat exchangers.Key ResponsibilitiesPerform various welding techniques, including TIG, MIG,...

  • Fabrication Shop Welder

    5 hours ago

    Richmond, Virginia, United States Hajoca Corporation Full time

    About the RoleWe are seeking a skilled Welder and Fabrication Expert to join our team at Hajoca Corporation. As a key member of our manufacturing department, you will be responsible for ensuring the highest quality of our products.Key ResponsibilitiesWelding and Fabrication: Utilize MIG full/partial penetration welding techniques to assemble and repair metal...

  • Metal Fabrication Specialist

    1 week ago

    Richmond, Virginia, United States Hanover Iron Works, Inc. Full time

    Exciting Career Opportunity as a Welder/GrinderAt Hanover Iron Works, Inc., a prominent player in the miscellaneous metals fabrication industry, we are seeking skilled Welder/Grinders to enhance our workforce. This position offers a unique chance to engage in dynamic projects and contribute to our growth.Primary Duties:Perform welding and grinding on various...

  • Welder and Fabrication Expert

    7 days ago

    Richmond, Virginia, United States Hajoca Corporation Full time

    About the RoleWe are seeking a skilled Welder and Fabrication Expert to join our team at Hajoca Corporation. As a key member of our manufacturing team, you will be responsible for ensuring the highest quality of our products.Key ResponsibilitiesWelding and Fabrication: Perform MIG full/partial penetration welding, plasma cutting pipe and steel plate, and...

  • Metal Fabrication Specialist

    2 weeks ago

    Richmond, Virginia, United States Aerotek Full time

    Metal Fabrication SpecialistPosition OverviewWe are currently seeking skilled Metal Fabrication Specialists with expertise in dual shield and flux-core welding techniques. Ideal candidates will demonstrate proficiency in welding structural steel components and will be assigned a dedicated welding station for their tasks.Key Responsibilities- Execute...

  • Metal Fabrication Specialist

    2 weeks ago

    Richmond Heights, Virginia, United States WORKFORCE Full time

    Company Overview: Workforce is currently seeking applications for the role of Welder within the Welding and Fabrication department. Compensation: $19.00 - $22.00 per hour Position Overview: The Welder will operate under moderate to minimal supervision, depending on their level of experience. This role involves laying out, fitting, and welding fabricated...

  • Metal Fabrication Specialist

    2 weeks ago

    Richmond Heights, Virginia, United States WORKFORCE Full time

    Workforce is currently seeking qualified candidates for the role of Welder within the Welding and Fabrication department. Compensation: $19.00-$22.00 per hour Position Overview: The Welder will operate under moderate to minimal supervision, depending on experience, to layout, fit, and weld fabricated steel structures and metal components on the production...

  • Metal Fabrication Welder/Grinder Position

    1 week ago

    Richmond, Virginia, United States Hanover Iron Works, Inc. Full time

    Exciting Career Opportunity as a Welder/GrinderHanover Iron Works, Inc. is a prominent player in the miscellaneous metals fabrication industry. We are seeking skilled Welder/Grinders to enhance our workforce. This role presents a unique chance to engage in diverse projects within a dynamic environment.Primary Duties:Perform welding and grinding tasks on...

  • Metal Fabrication Welder/Grinder Position

    2 weeks ago

    Richmond, Virginia, United States Hanover Iron Works, Inc. Full time

    Exciting Career Opportunity as a Welder/GrinderHanover Iron Works, Inc. is a prominent player in the miscellaneous metals fabrication industry. We are currently seeking skilled Welder/Grinders to enhance our workforce. This position offers a unique chance to engage in diverse projects within a dynamic environment.Primary Duties:Perform welding and grinding...

  • Structural Steel Welder

    2 weeks ago

    Richmond, Virginia, United States Aerotek Full time

    Structural Steel Welder Position Overview We are currently seeking skilled Fitter / Flux Core Welders with expertise in dual shield and flux-core welding techniques specifically for structural steel applications. In this role, you will be responsible for assembling and welding structural steel components at your designated welding station. Key...

  • Fabrication Specialist for Custom Awnings

    2 weeks ago

    Richmond, Virginia, United States Capitol Awning Full time

    Position OverviewCapitol Awning specializes in the design, production, and installation of tailored awning solutions for both residential and commercial clients. With over 90 years of experience, we pride ourselves on exceptional customer service and high-quality products.Role ResponsibilitiesWe are seeking a dedicated individual to join our Sewing...

  • Structural Steel Welder

    2 weeks ago

    Richmond, Virginia, United States Aerotek Full time

    Structural Steel Welder*Job DescriptionWe are currently seeking skilled Fitter / Flux Core Welders. Ideal candidates will possess the capability to perform dual shield/flux-core welding on structural steel components. You will be assigned a welding station and will be responsible for assembling structural steel parts. Additionally, you will utilize an...

  • Structural Steel Welder

    2 weeks ago

    Richmond, Virginia, United States Aerotek Full time

    Job Title: Structural Steel Welder - Richmond Job Overview We are currently seeking skilled Fitter / Flux Core Welders. Ideal candidates will possess the capability to perform dual shield/flux-core welding on structural steel components. You will be assigned a dedicated welding station and will be responsible for assembling structural steel elements....

  • Structural Steel Welder

    2 weeks ago

    Richmond, Virginia, United States Aerotek Full time

    **Position Title: Structural Steel Welder - Richmond****Position Overview**We are currently seeking skilled Fitter / Flux Core Welders. Ideal candidates will possess the capability to perform dual shield/flux-core welding on structural steel components. You will be assigned a dedicated welding station and will be responsible for assembling structural steel...

  • Welder I

    1 month ago

    Richmond, Virginia, United States Alfa Laval Full time

    At Alfa Laval, we always go the extra mile to overcome the toughest challenges. Our driving force is to accelerate success for our customers, people and planet. You can only achieve that by having dedicated people with a curious mind. Curiosity is the spark behind great ideas. And great ideas drive progress.Who you areYou are a self-motivated team player...

  • MIG Welder

    1 week ago

    Richmond, Virginia, United States Qualified Staffing Full time

    Job SummaryWe are seeking a skilled MIG Welder to join our team at Qualified Staffing. As a MIG Welder, you will be responsible for laying out, fitting, and welding fabricated steel frames and/or metal parts on the production floor using welding equipment.Key ResponsibilitiesAdjust and use torch and plasma cutter and/or grinder properly in...