Inspector Parts Specialist

2 weeks ago

Stratford, Connecticut, United States Lockheed Martin Corporation Full time
Job Description

As a skilled Inspector Parts Specialist, you will play a critical role in ensuring the quality and accuracy of complex parts and assemblies. Your expertise in layout and inspection will be essential in identifying and resolving issues that could impact the safety and performance of our aircraft.

Key Responsibilities
  • Plan and execute complex layouts and inspections of unusual and intricate parts, assemblies, and first-run development parts.
  • Work from detailed drawings, specifications, and instructions to visually and dimensionally inspect parts and assemblies.
  • Inspect complicated machined parts and assemblies before, during, and after release for overhaul and repair operations.
  • Maintain certifications for Tap Test, Flight Safety Parts, Conductivity, and Torque.
  • Utilize electronic databases to record Discrepancy Reports, scrap and remove parts from inventory, and reference QATI, SAC Quality processes and procedures.
  • Interface with Engineering regarding MRB parts and determine correct methods and procedures for difficult layouts and dimensional checks.
  • Use surface plates, dividing head, FARO arm, CMM, and other equipment to make exacting dimensional checks of widths, lengths, depths, heights, locations, hole sizes, pitch diameters, spacing, clearances, alignments, concentricities, parallelisms, compound angles, interrelated dimensions, and other measurements.
  • Visually inspect parts for nicks, scratches, cracks, burns, dents, sharp edges, rust, corrosion, and other surface irregularities, and check for improper processing, material, finish, heat treat, hardness, welding, brazing, identification, verification of source of previous inspections as applicable and sequence and completeness of operations.
  • Finalize results of inspections findings, prepare reports, and complete all other required paperwork.
  • Direct and instruct up to 5 lower-grade inspectors relative to inspection methods, difficult setups, and questionable deviations.
  • Occasionally advise and work with vendor representatives, Engineering, and Manufacturing Engineering concerning discrepancies and other matters affecting quality control standards.
  • Travel to vendors to inspect in-process work as required.
  • Perform other duties consistent with inspection operations when required.
  • Perform operator checklist as required and follow all rules and regulations pertaining to environmental health and safety.
  • Contribute to the overall effectiveness of equipment by performing operator-required upkeep.
  • As required, segregate waste material and follow good housekeeping practices.
  • Refer only difficult and unusual problems to working leader or supervisor.
Basic Qualifications

Requires well-rounded knowledge of advanced mathematics, including trigonometry, handbook formulas, inspection methods and practices, machining processes, aircraft processes, materials, and specifications, surface plate layout methods, manufacturing processes, and the use and capabilities of precision measuring instruments and other inspection equipment.

Equivalent to a minimum of 4 years of high school plus 4 years of technical training. Maintain current certification(s) as required. 3 to 4 years of experience required.

Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

  • Inspector Parts Specialist

    4 days ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job Summary:We are seeking a highly skilled Inspector Parts Specialist to join our team at Lockheed Martin Corporation. As an Inspector Parts Specialist, you will be responsible for inspecting complex machined parts and assemblies to ensure they meet the highest quality standards.Key Responsibilities:Inspect complicated machined parts and assemblies before,...

  • CMM Inspector/Programmer

    2 weeks ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job DescriptionLockheed Martin is seeking a highly skilled CMM Inspector/Programmer to join our team. As a key member of our quality control team, you will be responsible for planning, performing, and directing coordinate measuring machine (CMM) operations on vendor and in-house manufactured products and machined parts.Key Responsibilities:Plan, perform, and...

  • Senior Quality Inspector

    4 days ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a highly skilled Senior Quality Inspector to join our team at Lockheed Martin Corporation. As a Senior Quality Inspector, you will be responsible for inspecting complex and unusual machined or composite parts supplied by vendors or produced in-plant.Key ResponsibilitiesWork from drawings, specifications, general instructions,...

  • CMM Inspector/Programmer A

    1 week ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job DescriptionAs a CMM Inspector/Programmer A at Lockheed Martin Corporation, you will be responsible for planning, performing, and directing coordinate measuring machine (CMM) operations on vendor and in-house manufactured products and machined parts. Your expertise will be utilized to write complex non-menu-driven inspection programs from available...

  • Non-Destructive Testing Specialist

    1 week ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a highly skilled Non-Destructive Testing (NDT) Specialist to join our team at Lockheed Martin Corporation. As an NDT Specialist, you will be responsible for supporting the NDT scope of work on legacy helicopter platforms and emerging platforms such as the CH53K.You will perform engineering evaluations, including defect analysis, NDT...

  • CMM Inspector/Programmer

    4 weeks ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a highly skilled CMM Inspector/Programmer to join our team at Lockheed Martin Corporation. As a key member of our inspection team, you will be responsible for planning, performing, and directing coordinate measuring machine (CMM) operations to ensure the quality and accuracy of our products.Key ResponsibilitiesPlan and perform CMM...

  • Non-Destructive Testing Specialist

    2 weeks ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a highly skilled Non-Destructive Testing (NDT) Specialist to join our team at Lockheed Martin Corporation. As an NDT Specialist, you will be responsible for supporting the NDT scope of work on legacy helicopter platforms and emerging platforms, such as CH53K, and other new programs.Key ResponsibilitiesPerform engineering...

  • Non Destructive Testing Specialist

    2 weeks ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a highly skilled Non Destructive Testing (NDT) Specialist to join our team at Lockheed Martin Corporation. As an NDT Specialist, you will be responsible for supporting the NDT scope of work on legacy helicopter platforms and emerging platforms, such as CH53K, and other new programs.Key ResponsibilitiesPerform engineering evaluation,...

  • Materials Procurement Specialist

    2 weeks ago

    Stratford, Connecticut, United States McMellon Bros Inc Full time

    Job OpportunityWe are seeking a skilled professional to join our management team at McMellon Bros Inc, a stable and family-owned aerospace CNC manufacturing company.Key ResponsibilitiesMaterials Purchaser: Research, quote, purchase, receive, document, and release materials to jobs, requiring strong communication, organizational, and computer...

  • Materials Procurement Specialist

    3 weeks ago

    Stratford, Connecticut, United States McMellon Bros Inc Full time

    Job OverviewWe are seeking a highly skilled professional to join our management team at McMellon Bros Inc, a leading Aerospace CNC manufacturing company.Key ResponsibilitiesMaterials Purchaser: Research, quote, purchase, receive, document, and release materials to jobs, requiring strong communication, organizational, and computer skills.Scheduler/Expeditor:...

  • Materials Procurement Specialist

    4 weeks ago

    Stratford, Connecticut, United States McMellon Bros Inc Full time

    Job OpportunityWe are seeking a highly skilled professional to fill a key role in our management team at McMellon Bros Inc, a leading aerospace CNC manufacturing company.Job SummaryWe are looking for a talented individual to join our team in one of the following areas:Materials Procurement: Responsible for researching, quoting, purchasing, receiving,...

  • Quality Assurance Specialist

    1 week ago

    Stratford, Connecticut, United States 360 Recruiting Group Full time

    About Us:J.R. Merritt Controls has been a leading voice in industrial control and human interface solutions since the mid-1980s. For over 30 years, we've helped customers experience heightened levels of machine operator productivity, comfort, and safety.Why Work with Us:Competitive rates starting at $22-24/hour based on experienceA full benefits package...

  • Culinary Specialist

    4 days ago

    Stratford, Connecticut, United States Thomas Jefferson University & Jefferson Health Full time

    Culinary SpecialistUnder the direction of the Lead Cook, Food Service Supervisor, Food Service Manager, Production Manager, or Executive Chef, the Culinary Specialist is responsible for preparing food according to standard recipes and ensuring superior quality food that meets standards for flavor, texture, appearance, temperature, nutritional value, and...

  • Retail Merchandising Specialist

    1 week ago

    Stratford, Connecticut, United States SRS Merchandising Full time

    SRS Merchandising OpportunityWe are seeking a Retail Merchandising Specialist to join our team. As a Field Merchandiser/Reset Specialist, you will work with various in-store products and brands, maintaining planograms, resetting displays, and conducting audits. This part-time, flexible position allows you to schedule store visits between project start and...

  • Delivery Driver

    7 days ago

    Stratford, Connecticut, United States Unavailable Full time

    Job Title: Delivery DriverOverviewCareers Powered by Parts Authority, LLC.Stratford, CT.YOUR FUTURE IS NOWWe have newly created career opportunities for Delivery Drivers - Auto Parts.Company Vehicle provided.The Delivery Driver plays a pivotal role in the success of our business. They are the main point of contact with our customers and are responsible for...

  • Maintenance Planning Specialist

    3 weeks ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    About the RoleWe are seeking a skilled Maintenance Planning Specialist to join our team at Lockheed Martin Corporation. As a key member of our logistics team, you will be responsible for delivering high-quality maintenance data and support to our customers.Key ResponsibilitiesDevelop and maintain maintenance plans and procedures to ensure efficient and...

  • Diagnostic Imaging Specialist

    5 days ago

    Stratford, Connecticut, United States Career Land Center Full time

    About the job Diagnostic Imaging SpecialistWe are seeking a skilled Diagnostic Imaging Specialist to assist in patient diagnoses and treatment plans in various urgent care settings across Bridgeport, New Haven, Trumbull, Fairfield, and Shelton, CT.As an integral part of our healthcare team, you will perform diagnostic X-ray examinations following established...

  • 68w Health Care Specialist

    3 days ago

    Stratford, Connecticut, United States Army National Guard Full time

    Job Title: 68w Health Care SpecialistJob Summary: As a Health Care Specialist in the Army National Guard, you will provide medical care and support to civilians and Soldiers in various settings. Your duties will include administering emergency medical treatment, assisting with outpatient and inpatient care, and managing medical supplies and equipment.Key...

  • Aircraft Maintenance Specialist

    1 week ago

    Stratford, Connecticut, United States Lockheed Martin Corporation Full time

    Job Summary: We are seeking an experienced Aircraft Maintenance Specialist to join our team at Lockheed Martin Corporation. The successful candidate will be responsible for performing maintenance tasks on experimental aircraft, including inspections, repairs, and modifications.Key Responsibilities:Perform maintenance tasks on experimental aircraft, including...

  • Education Support Specialist

    1 week ago

    Stratford, Connecticut, United States Stratford Public Schools Full time

    Job Summary:The Stratford Public Schools is seeking a skilled Education Support Specialist to join our team. As a key member of our staff, you will be responsible for ensuring the accuracy and efficiency of student data entry and reporting.Key Responsibilities: Input student data and transfer test data from TOPSPRO into LACES. Create attendance documents in...