Sheet Metal Fabricator

2 weeks ago

Dothan, Alabama, United States Comfort Systems USA Southeast Full time
Job Summary

We are seeking a skilled Sheet Metal Journeyman to join our team at Comfort Systems USA Southeast, Inc. As a key member of our mechanical construction team, you will be responsible for fabricating, assembling, and installing mechanical systems on commercial and industrial construction sites.

Key Responsibilities
  • Install a variety of HVAC materials, including round pipe/spiral duct, flex duct, motorized dampers, air devices, louvers, and air moving equipment.
  • Install duct work and sheet metal assemblies on site according to blueprints and specifications.
  • Fabricate or alter parts using shears, hammers, punches, snips, drills, brakes, and bending rollers, as well as other handheld and power tools.
  • Install support hangers, make duct connections using clips, drives, nuts, bolts, TDC tape, sealer, sheet metal screws, etc.
  • Install manual dampers, supporting hardware, etc., make final connections to equipment.
  • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts using hand tools and portable power tools.
  • Fasten seams and joints with bolts, cement, rivets, caulk, clips, etc.
  • Drill and punch holes in metal for screws, bolts, rivets, and install spin-in, peel-and-stick, or airtight duct taps, connect to branch duct.
  • Able to work off ladders, man lifts, and other equipment from various heights.
  • Operate man lift, personal lift, chain hoist, duct jack.
  • Perform other related duties or special projects as assigned.
Requirements
  • 5 or more years of experience working within the HVAC/mechanical trade installing systems on commercial and industrial construction sites.
  • Current/valid Journeyman license in applicable state.
  • Experience with tools including but not limited to shears, brakes, bending rolls, punch, drill press, snips, and other hand and power tools.
  • Experience leading/coaching an Apprentice.
  • Familiarity with blueprints, schematics, drawings, and other equipment layout materials.
  • OSHA 10 certification preferred (company will provide if needed).
Additional Requirements
  • Maintain a positive, cooperative, and teachable attitude.
  • Initiative; self-motivated (driven), self-starter.
  • Complies and promotes company Safety Policy.
  • Regular and punctual attendance. Ability to work overtime if needed.
  • Ability to stand, squat, bend, stoop, and comfortably lift up to 50 lbs.
  • Ability to pass a full background screening, MVR, and drug screening.
  • Ability to travel, as needed, for projects.
Compensation
  • Wage Range Starting at: $22.00+/hr. based on qualifications & experience.
Comprehensive Benefits
  • Medical, Vision, Dental.
  • Paid holiday and vacation.
  • 401(k) Plan with multiple investment options.
  • Training and Development Programs.
  • Employee discount programs.
  • Company-paid and voluntary life insurance.
  • Company-paid and voluntary accidental death & dismemberment (AD&D).
  • Company-paid short-term disability.
  • Vehicle discount purchase programs.
Disclaimer

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Comfort Systems USA (Southeast), Inc. is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws.

We strive to foster a work environment that includes and embraces racial, ethnic, and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

  • CNC Metal Fabrication Specialist

    1 day ago

    Dothan, Alabama, United States Cummings Full time

    About the JobCummings Resources is seeking a skilled Press Brake Operator to join our team. As a key member of our metal fabrication department, you will be responsible for operating a press brake to bend, shape, cut, and manipulate sheet metal and metal plates.Key ResponsibilitiesOperate a press brake to manufacture products from sheet metal or metal...

  • Fabricator

    3 weeks ago

    Dothan, Alabama, United States Cummings Resources, LLC Full time

    About the RoleCummings Resources, LLC is seeking a skilled Fabricator to join our team. As a Fabricator, you will be responsible for fabricating and assembling structural metal products such as framework or shells for machinery, ovens, tanks, stacks, and metal parts for buildings and bridges.Key ResponsibilitiesDevelop and implement layout plans and...

  • Fabricator

    3 weeks ago

    Dothan, Alabama, United States Cummings Full time

    About Cummings ResourcesCummings Resources is a leading manufacturer of exterior & interior sign products and branding elements for the world's most iconic companies.Job SummaryThis Fabricator will be responsible for fabricating and assembling structural metal products, such as framework or shells for machinery, ovens, tanks, stacks, and metal parts for...

  • Fabricator

    3 weeks ago

    Dothan, Alabama, United States Cummings Resources, LLC Full time

    Job SummaryCummings Resources, LLC is seeking a skilled Fabricator to join our team. As a Fabricator, you will be responsible for fabricating and assembling structural metal products, including framework, shells, and metal parts for buildings and bridges.About the CompanyCummings Resources creates exterior & interior sign products and branding elements for...

  • Fabricator

    3 weeks ago

    Dothan, Alabama, United States Cummings Resources, LLC Full time

    Job SummaryCummings Resources, LLC is seeking a skilled Fabricator to join our team. As a Fabricator, you will be responsible for fabricating and assembling structural metal products, including framework, shells, and metal parts for buildings and bridges.About the CompanyCummings Resources, LLC is a leading manufacturer of exterior and interior sign products...

  • Sheetmetal Fabrication Specialist

    22 hours ago

    Dothan, Alabama, United States Comfort Systems USA Southeast Full time

    Job SummaryWe are seeking a highly skilled Sheet Metal Journeyman to join our team at Comfort Systems USA Southeast, Inc. As a key member of our mechanical construction team, you will be responsible for fabricating, assembling, and installing mechanical systems on commercial and industrial construction sites.Key ResponsibilitiesInstall a variety of HVAC...

  • Manufacturing Welder

    1 day ago

    Dothan, Alabama, United States Advantage Resourcing Full time

    Manufacturing Welder Opportunity We are seeking a skilled Manufacturing Welder to join our team at a reputable company in Dothan, AL. As a key member of our production team, you will be responsible for fitting, fabricating, and welding metal components with precision and accuracy. Key Responsibilities: Fabricate and weld metal components to meet...

  • Motion Control Specialist

    1 week ago

    Dothan, Alabama, United States Allied Motion Technologies Full time

    Job Title: Team OperatorAllied Motion Technologies is seeking a skilled Team Operator to join our team at our Dothan, AL location. As a Team Operator, you will be responsible for performing all operations required for the manufacture and assembly of motor components, motors, and other motion control products and systems.Key Responsibilities:Loads and unloads...

  • Assembly Line Technician

    3 weeks ago

    Dothan, Alabama, United States Allied Motion Technologies Inc. Full time

    Job SummaryWe are seeking a skilled Assembly Line Technician to join our team at Allied Motion Technologies Inc. in Dothan, AL.This is a great opportunity to work in a fast-paced manufacturing environment, performing a variety of tasks to ensure the efficient production of motor components, motors, and other motion control products.Key Responsibilities:Load...

  • Motion Control Specialist

    1 day ago

    Dothan, Alabama, United States Allied Motion Technologies Full time

    Job Title: Team OperatorAt Allied Motion Technologies, we are seeking a highly skilled and detail-oriented Team Operator to join our team in Dothan, AL. As a Team Operator, you will be responsible for performing all operations required for the manufacture and assembly of motor components, motors, and other motion control products and systems.Key...

  • Cashier

    4 weeks ago

    Dothan, Alabama, United States Schnitzer Steel Full time

    Job SummaryThe Cashier is a key member of our team, responsible for providing exceptional customer service and ensuring a smooth transaction experience for our customers. This role requires strong communication skills, attention to detail, and the ability to work in a fast-paced environment.Key ResponsibilitiesInteract with customers to provide clarification...

  • Sheetmetal Journeyman

    1 week ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As a Sheet Metal Journeyman, you work with the mechanical construction team to fabricate, assemble, and install mechanical systems on various commercial and industrial construction sites. Job DutiesInstall of a variety of HVAC materials including but not limited to round pipe/spiral duct, flex duct, motorized dampers, air devices, louvers and air moving...

  • Sheetmetal Journeyman

    3 weeks ago

    dothan, United States Comfort Systems USA Southeast Full time

    As a Sheet Metal Journeyman, you work with the mechanical construction team to fabricate, assemble, and install mechanical systems on various commercial and industrial construction sites. Job DutiesInstall of a variety of HVAC materials including but not limited to round pipe/spiral duct, flex duct, motorized dampers, air devices, louvers and air moving...

  • Sheetmetal Journeyman

    3 weeks ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As a Sheet Metal Journeyman, you work with the mechanical construction team to fabricate, assemble, and install mechanical systems on various commercial and industrial construction sites. Job DutiesInstall of a variety of HVAC materials including but not limited to round pipe/spiral duct, flex duct, motorized dampers, air devices, louvers and air moving...

  • Sheetmetal Journeyman

    3 weeks ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As a Sheet Metal Journeyman, you work with the mechanical construction team to fabricate, assemble, and install mechanical systems on various commercial and industrial construction sites. Job DutiesInstall of a variety of HVAC materials including but not limited to round pipe/spiral duct, flex duct, motorized dampers, air devices, louvers and air moving...

  • Sheetmetal Worker

    3 days ago

    Dothan, United States Comfort Systems USA SE Full time

    Job DescriptionJob DescriptionAs a Sheet Metal Journeyman, you work with the mechanical construction team to fabricate, assemble, and install mechanical systems on various commercial and industrial construction sites. Job DutiesInstall of a variety of HVAC materials including but not limited to round pipe/spiral duct, flex duct, motorized dampers, air...

  • HVAC Installer

    1 week ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As an HVAC Installer, you will work with our mechanical projects team to complete commercial mechanical equipment change out, retrofit and installation projects. Typical projects include installation, replacements and retrofits of HVAC equipment, sheet metal / ductwork, piping and other related materials and systems.Compensation• Wage Range Starting at:...

  • HVAC Installer

    3 weeks ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As an HVAC Installer, you will work with our mechanical projects team to complete commercial mechanical equipment change out, retrofit and installation projects. Typical projects include installation, replacements and retrofits of HVAC equipment, sheet metal / ductwork, piping and other related materials and systems.Compensation• Wage Range Starting at:...

  • HVAC Installer

    3 weeks ago

    dothan, United States Comfort Systems USA Southeast Full time

    As an HVAC Installer, you will work with our mechanical projects team to complete commercial mechanical equipment change out, retrofit and installation projects. Typical projects include installation, replacements and retrofits of HVAC equipment, sheet metal / ductwork, piping and other related materials and systems.Compensation• Wage Range Starting at:...

  • HVAC Installer

    3 weeks ago

    Dothan, United States Comfort Systems USA Southeast Full time

    As an HVAC Installer, you will work with our mechanical projects team to complete commercial mechanical equipment change out, retrofit and installation projects. Typical projects include installation, replacements and retrofits of HVAC equipment, sheet metal / ductwork, piping and other related materials and systems.Compensation• Wage Range Starting at:...

  • Team Operator

    4 months ago

    Dothan, United States Allied Motion Technologies Full time

    Allient Inc. is currently looking for Team Operator's (1st, 2nd & 3rd shift) to perform all operations required for the manufacture and assembly of motor components, motors, and other motion control products and systems at our Dothan, AL location! Apply now! Great benefits and hourly rate, PLUS $1.00 2nd shift and $1.50 3rd shift pay differential! Allient...

  • Team Operator

    3 days ago

    Dothan, United States Allied Motion Technologies Full time

    Allient Inc. is currently looking for Team Operator's (1st, 2nd & 3rd shift) to perform all operations required for the manufacture and assembly of motor components, motors, and other motion control products and systems at our Dothan, AL location! Apply now! Great benefits and hourly rate, PLUS $1.00 2nd shift and $1.50 3rd shift pay differential! Allient...

  • Store Manager

    1 month ago

    Dothan, United States Chico's FAS Full time

    Join our chic team, dedicated to a styling and social experience that inspires women to express their individuality.POSITION OBJECTIVE:The Store Manager is primarily responsible for promoting a customer and product-focused sales culture where our values and guiding principles are at the forefront of all store operations, including managing sales operations,...