Aircraft Cabinet Maker III

4 weeks ago

Lake Charles, Louisiana, United States Citadel Completions LLC Full time
Job Summary

Citadel Completions LLC is seeking a skilled Aircraft Cabinet Maker III to join our team. This role involves fabricating and finishing aircraft cabinets and interior components using design and engineering drawings and specifications.

Key Responsibilities
  • Fabricate aircraft furniture and other composite, honeycomb or wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity.
  • Assemble pins and glues cabinet shells. Install drawer-slides, hinges, latches and other hardware in sub-assemblies.
  • Apply exterior surface materials such as laminates, veneers, and cap strips.
  • Ensure the work area is kept to the highest standards of safety, compliant at all times, enforcing regulations and practices to avoid accidents.
  • Perform the proper tagging of Aircraft components, parts and panels appropriately stored (including racks by aircraft).
  • Perform documentation procedures and signoffs in accordance with Repair Station Quality Manual and respective task requirements.
  • Ensure that tools and equipment are correctly used and handled for both safety and to reduce breakages, wear and tear.
  • Strive for continuous process improvements and increasing efficiencies in execution and delivery with safety as a priority.
  • Maintain close and frequent communication with the Lead Technician, notifying him/her of progress and any roadblocks or threats to task accomplishment that could impact re-delivery.
  • Deal with customers in a cordial, respectful and professional manner.
  • Ensure the highest quality service, safety standards and performance, with the objective of exceeding customer satisfaction in the re-delivery of airworthy, reliable and clean aircraft, in a timely manner.
  • Take part in any required training as determined by the company.
  • Other duties as assigned.
Requirements
  • Experienced with table saw, band saw, and woodworking equipment.
  • Proficient in reading blueprints.
  • Perform work fabrication, finishing, woodwork etc. without guidance.
  • Knowledge and experience with various types of materials.
  • At least two years of commercial cabinet shop production or finish carpentry experience.
  • High school diploma or equivalent.
  • Proficient in oral and written English.
  • Must report for assignment with personal set of standard trade-specific tools.
Preferred Qualifications
  • 3+ years of experience in V/VVIP custom aircraft cabinet making.
Knowledge, Skills, Abilities, and Other Characteristics
  • Must be able to read and interpret engineering drawings, technical manuals, structure repair manuals, understanding symbols, flags, and general notes.
  • Advanced knowledge of Aircraft Finish and Paint application processes applicable to high end VIP aircraft completions such as clear coat and paint working with composite and Aluminum panels.
  • Able to read, interpret and apply FAA approved or accepted data (i.e. IPC, M/M, OHM, SRM) proficiently.
  • Proven ability to work alone and in a team environment.
  • Effective decision-making skills.
  • Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately.
  • Motivation: must maintain a positive attitude and strong work energy.
  • Organization: very detail oriented and always prepared.
Working Conditions

The work is performed in an office environment, industrial shop, aircraft hangar, at the departure gate or on the aircraft parking ramp.

Physical Activity/Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position is considered MEDIUM work.

  • Requires frequent walking, standing and/or climbing.
  • Are expected to work through specially designed airframe, engine and undercarriage openings while standing on ladders or scaffolds; to use hoists and lifts; required precision instruments and other necessary tools.
  • Exposure to climate changes normally experienced in an aviation repair facility.

OCCASIONAL

FREQUENT

CONSTANT

  • Lift up to 50 pounds
  • Climbing, stooping, kneeling, squatting, and reaching
    • Lift up to 10 pounds
    • Standing
      • Repetitive movements of arms and hands
      • Sit with back supported

  • Aircraft Cabinet Fabricator

    3 weeks ago

    Lake Charles, Louisiana, United States AAA USA Inc Full time

    Job SummaryAircraft Cabinet Maker needed for a premier provider of VIP/VVIP interior completions for large aircraft. The ideal candidate will have experience with table saw, band saw, and woodworking equipment, as well as the ability to read blueprints.Key Responsibilities:Fabricate aircraft furniture and other composite, honeycomb or wood-surfaced...

  • Cabinet Maker

    2 weeks ago

    Prior Lake, United States Signature Woodworking Full time $23 - $28

    Exciting opportunity alert! Our dynamic and rapidly expanding custom cabinet and millwork company, Signature Woodworking, with over 26 years of excellence, is looking for an exceptional individual to join our team as a cabinet maker. We craft custom commercial cabinets for various settings, including office buildings, clinics, and restaurants. Don't worry if...

  • Cabinet Maker

    1 month ago

    Big Lake, United States Aerotek Full time

    Job DescriptionJob DescriptionHiring Entry and Experienced Cabinet Makers or Mechanically inclined people!Pay ranging from $20-$32 based off experience!Job DescriptionBuild and assemble custom cabinets. Regularly use basic hand and power tools, tape measures, and levels to build the cabinets. May be required to work off of blueprints and work instructions...

  • Cabinet Maker Lead

    4 weeks ago

    Big Lake, Minnesota, United States Paragon Store Fixtures Full time

    Job SummaryParagon Store Fixtures is seeking a highly skilled and experienced Journeyman Cabinet Maker to lead our Fixture Assembly Department. As a key member of our team, you will be responsible for overseeing the daily operations of the Assembly Department, managing and mentoring other Cabinet Makers, and building high-end retail store fixtures.Key...

  • Cabinet Maker

    4 weeks ago

    Big Lake, United States Aerotek Full time

    Job DescriptionJob DescriptionJob Title: Cabinet Maker $22 to $32 per hour : Big Lake, MN Job DescriptionBuild and assemble custom cabinets. Regularly use basic hand and power tools, tape measures, and levels to build the cabinets. Work off of blueprints and work instructions regularly. Operate machines and perform various tasks in the woodshop.Hard...

  • Cabinet Maker

    4 weeks ago

    Big Lake, United States Aerotek Full time

    Job DescriptionJob DescriptionHiring: Cabinet Maker $22 to $32 per hour in Big Lake, MN Job DescriptionBuild and assemble custom cabinets. Regularly use basic hand and power tools, tape measures, and levels to build the cabinets. Work off of blueprints and work instructions regularly. Operate machines and perform various tasks in the woodshop.Hard...

  • Cabinet Maker

    2 weeks ago

    Big Lake, United States Aerotek Full time

    Job DescriptionJob DescriptionHiring: Cabinet Maker $22 to $32 per hour in Big Lake, MN Job DescriptionBuild and assemble custom cabinets. Regularly use basic hand and power tools, tape measures, and levels to build the cabinets. Work off of blueprints and work instructions regularly. Operate machines and perform various tasks in the woodshop.Hard...

  • Cabinet Maker

    2 months ago

    Big Lake, United States Aerotek Full time

    Job DescriptionJob DescriptionHiring Entry and Experienced Cabinet Makers!Pay ranging from $20-$28 based off experience!Job DescriptionBuild and assemble custom cabinets. Regularly use basic hand and power tools, tape measures, and levels to build the cabinets. May be required to work off of blueprints and work instructions regularly.Hard SkillsCabinet...

  • Cabinet Craftsman

    4 weeks ago

    Big Lake, Minnesota, United States Aerotek Full time

    Job OpportunityAerotek is seeking a skilled Cabinet Maker to join our team in BIG LAKE, Minnesota.This is a fully on-site position where you will be responsible for building and assembling custom cabinets. You will regularly use basic hand and power tools, tape measures, and levels to build the cabinets. May be required to work off of blueprints and work...

  • Airfield Maintenance Specialist III

    4 weeks ago

    Salt Lake, Utah, United States Salt Lake City Full time

    About the PositionAs an Airfield Maintenance Specialist III, you will be responsible for ensuring the day-to-day safe, secure, and efficient operations of our airports. This pivotal role involves maintaining landing strips, airfield facilities, and perimeters, as well as operating and maintaining trucks and heavy equipment. If you thrive in a high-stakes...

  • Mold Maker

    7 days ago

    Lake Forest, United States Schoening Technology Group Full time

    Job DescriptionJob DescriptionMUST HAVE MOLD MAKING EXPERIENCEGENERAL FUNCTIONThe Mold Tech III performs all functions related to maintaining, repairing and modifying frame and lens injection mold tooling to meet engineering, quality and production standards.MAJOR DUTIES AND RESPONSIBILITIES-Perform preventive maintenance for frame and lens injection molding...

  • Airfield Maintenance Specialist III

    5 months ago

    Salt Lake City, United States Salt Lake City Full time

    Position Title:Airfield Maintenance Specialist III (may underfill)Job Description:Are you ready to take flight in your career? The Salt Lake City Department of Airports is on the hunt for an energetic and dedicated Airfield Maintenance Specialist III (may underfill as I or II) to join our dynamic team. This pivotal role involves ensuring the day-to-day safe,...

  • Air Express Ramp Agent SLC

    1 month ago

    Salt Lake City, United States Worldwide Flight Services, Inc. Full time

    About WFS Join our Worldwide Flight Services family and contribute to the timely delivery of cargo shipment, luggage, business to customer delivery, and on-time flights while operating safely and securely.  We perform at the highest level for our customers every day, and strive to be an exceptional leader in our industry with our teams of cargo, passenger,...

  • CDL Driver

    4 weeks ago

    Salt Lake, Utah, United States Newrest Full time

    Job Summary:The CDL Driver is responsible for safely transporting food carts to the airport and unloading them directly onto the plane. This role requires a valid CDL license and the ability to work in a fast-paced environment.Key Responsibilities: Ensure on-time delivery of all items for each flight Responsible for the safety and protection of self,...

  • Program Manager

    4 weeks ago

    Moses Lake, United States LHH Full time

    We are seeking experienced Program Managers for an upcoming project. This is a contract-to-hire opportunity with a competitive pay rate (flexible based off experience) and a Monday through Friday schedule, with flexibility in hours as needed.Key Responsibilities:Act as the primary point of contact for program-related inquiries and manage execution of...

  • CDL Driver

    1 month ago

    Salt Lake City, United States Newrest Full time

    CDL Driver (AM Shift)Department:TransportationEffective Date:October 11, 2024Reports to:Transportation ManagerSalary Status:Non-exemptSUMMARY:The Driver loads food carts on the truck, drives the truck to the airport, and unloads the food directly on to the plane. This individual makes this trip at least twice a day. The difference between the Half Cab Driver...

  • Area Mechanic Woodworker

    3 months ago

    LAKE BUENA VISTA, United States Disability Solutions Full time

    At Disney, we‘re storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative...

  • CDL Driver

    4 months ago

    Salt Lake City, United States Newrest Full time

    ESSENTIAL FUNCTIONS •Load and unload of all equipment on trucks. •Check to ensure the correct amount of trolleys and cabinets to be delivered before loading. •Fill pre-trip inspection book & perform mandatory safety checks of the vehicle for each shift. •Ensure the loading the products into vehicles is done according to plan galley. •Ensure all...

  • CDL Driver

    3 months ago

    Salt Lake City, United States Newrest Full time

    ESSENTIAL FUNCTIONS• Load and unload of all equipment on trucks.• Check to ensure the correct amount of trolleys and cabinets to be delivered before loading.• Fill pre-trip inspection book & perform mandatory safety checks of the vehicle for each shift.• Ensure the loading the products into vehicles is done according to plan galley.• Ensure all...

  • Project Director

    3 weeks ago

    Moses Lake, WA, United States LHH Recruitment Solutions Full time

    Job Title: Project DirectorWe are seeking an experienced Project Director to lead our upcoming project. This is a contract-to-hire opportunity with a competitive pay rate and a Monday through Friday schedule, with flexibility in hours as needed.Key Responsibilities:Act as the primary point of contact for program-related inquiries and manage execution of...

  • Commercial HVAC Technician I, II or III

    2 weeks ago

    Salt Lake City, United States ARUP Laboratories Full time

    Schedule : Monday - Friday (40 hrs/wk) 7:00 AM - 3:30 PM *If you qualify for a higher HVAC mechanic level the exact compensation will vary based on skills and experience. Primary Purpose : Supports the facilities by providing professional skills and experience related to troubleshooting, servicing, and repairing all heating, ventilation, and...