Welder

7 days ago


Batavia, United States Graham Corporation Full time
Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate.

Skills:

To perform the job successfully, an individual should demonstrate the following competencies:

1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.

2. Strong organization and time management skills.

3. High attention to detail.

4. Demonstrate behavior consistent with company values.

5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.

6. Exhibits polite and professional communication via phone, e-mail and mail.

7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.

8. Maintain a collaborative relationship with internal and external stakeholders.

9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.

10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.

11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.

12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.

13. Ability to thrive in a team environment.

Physical and Mental Demands:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.

• Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.

• Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.

Requirements

Qualifications:

To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.

Education and Training:

• Technical Trades School in Welding

• High school GED Required

Experience:

• 1+ years of welding experience.

Other:

• Must be willing to work overtime as required.

• Minimal travel may be required

Work Authorization:

Must be able to work in the U.S without sponsorship.

Salary Description

$22.00-30.00/hour
  • Welder Fabricator

    2 weeks ago


    Batavia, Illinois, United States Kable Staffing Full time

    Job SummaryKable Staffing is hiring a Mig Welder in the Batavia, OH area. This position offers a full-time, temp to hire opportunity with a competitive salary of $45,000 - $60,000 per year, depending on experience.Main Responsibilities:Proficient use of basic hand tools such as grinder, cut-off wheel, and magnetic drill.Able to accurately read and interpret...

  • Welder in Training

    3 weeks ago


    Batavia, United States Graham Corporation Full time

    Job Duties: Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code...

  • Welder in Training

    1 week ago


    Batavia, United States Graham Corporation Full time

    Job Duties: Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code...

  • Welder

    3 weeks ago


    Batavia, United States Graham Corporation Full time

    Graham Corporation is a great place to work with excellent benefits! Graham currently offers fully company paid Medical Insurance, Life Insurance and Long Term Disability. We also offer Dental & Vision Insurance and Supplemental Life Insurance you and your family. There is a very generous 401k match with no vesting schedule, 11 paid Holidays, a yearly...

  • Welder - 2nd Shift

    3 weeks ago


    Batavia, United States Graham Corporation Full time

    This is position is 4 days a week, 10 hours a day, Monday through Thursday.Job Duties: Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work;...


  • Batavia, United States Graham Corporation Full time

    Job Duties: Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code...

  • Welder in Training

    1 week ago


    Batavia, United States Graham Corporation Full time

    Job Type Full-time Description Job Title: WelderReports To: Manufacturing Supervisor FLSA Status & EEO Code: Hourly Non-Exempt & OperativesDivision/Department: ManufacturingLevel of Work: I Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional...


  • Batavia, United States Graham Corporation Full time

    Job Duties:Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code...


  • Batavia, Illinois, United States Kable Staffing Full time

    About the JobMIG WelderKable Staffing is a leading staffing agency specializing in workforce solutions for over 50 years. We connect skilled candidates with companies in need of reliable work opportunities.This role involves working as a MIG welder, requiring proficiency in basic hand tools such as grinders, cut-off wheels, and magnetic drills. You will also...


  • Batavia, Illinois, United States Kable Staffing Full time

    About the JobKable Staffing is hiring a Maintenance Technician to join our team in Batavia, OH. This is a full-time, temp-to-hire opportunity that offers a wide range of responsibilities and challenges.As a Maintenance Technician, you will be responsible for performing routine maintenance on HVAC units, identifying potential issues with facility equipment...


  • Batavia, Illinois, United States Kable Staffing Full time

    About the PositionWe are seeking a skilled Maintenance Technician to join our team at Kable Staffing. As a key member of our facilities maintenance team, you will be responsible for performing routine maintenance on HVAC units, identifying potential issues with facility equipment and tools, and providing hands-on support for various tasks around the...


  • Batavia, Illinois, United States Kable Staffing Full time

    About the RoleWe are seeking a skilled Maintenance Technician to join our team at Kable Staffing. As a key member of our facilities maintenance team, you will be responsible for performing routine maintenance on HVAC units, identifying potential issues with facility equipment and tools, and providing hands-on support for various tasks around the facility.The...

  • Millwright Welder

    3 months ago


    Batavia, United States DS Containers Full time

    Job DescriptionJob DescriptionAT DS CONTAINERS, THESE ARE OUR CORE VALUES: Integrity with all our investors, employees, suppliers, and customers. Customer orientation on the part of every employee. Quality designed into our process and practiced in everything we do. The use of technology to enhance productivity and customer satisfaction and control costs....

  • Millwright Welder

    1 week ago


    Batavia, United States DS Containers Full time

    Job DescriptionJob DescriptionAT DS CONTAINERS, THESE ARE OUR CORE VALUES: Integrity with all our investors, employees, suppliers, and customers. Customer orientation on the part of every employee. Quality designed into our process and practiced in everything we do. The use of technology to enhance productivity and customer satisfaction and control costs....

  • MIG Welder Technician

    2 weeks ago


    Batavia, Illinois, United States Kable Staffing Full time

    RequirementsCandidates must be at least 18 years old and hold a high school diploma or equivalent.A background in welding trade schools is necessary, with completion of the program.At least one year of on-the-job experience welding using GMAW or FCAW methods is required.Flexibility to work in other related departments is a plus.The ability to work...

  • Assembly Line Worker

    2 weeks ago


    Batavia, Illinois, United States Kable Staffing Full time

    Job OverviewKable Staffing is seeking an experienced Welder to join our team in Batavia, OH. In this role, you will be responsible for performing various welding tasks in a fast-paced manufacturing environment.Responsibilities:Perform welding tasks using GMAW/MIG welding methods.Inspect work for quality and accuracy.Maintain a safe working environment.Follow...


  • Batavia, Illinois, United States Kable Staffing Full time

    About the RoleIn this Assembly Line Worker position, you will be responsible for assembling various components in a fast-paced manufacturing environment.Responsibilities:Assemble components using hand and air tools.Inspect work for quality and accuracy.Maintain a safe working environment.Follow written and verbal work instructions.Work collaboratively with a...


  • Batavia, Illinois, United States Kable Staffing Full time

    Kable Staffing seeks a skilled Maintenance Technician to join our team in Batavia, OH. This temp to hire opportunity offers a Salary of $45,000 per year and provides the chance to work in a fast-paced environment.About the Job:The Maintenance Technician will perform routine maintenance on HVAC units, troubleshoot system issues, and ensure efficient operation...

  • Machine Operator

    18 hours ago


    Batavia, United States Aerotek Full time

    Job DescriptionJob DescriptionMachine Operator / Press Brake1st & 2nd Shift AvailableBatavia, ILOverviewYou will be running a press brake machine to bend the parts to the correct angles. The machines will be set up for the production run, so you will just need to be able to line the part up in the machine and run it to create the bend in the part. You will...


  • Batavia, United States Graham Corporation Full time

    Job Title: Boring Mill OperatorReports To: Manufacturing SupervisorLevel of Work: IPosition Summary: Working form blueprints, sketches, and oral or written instructions, sets up and operates a manual boring mill. Key Results Areas by level of workLevel I: Quality - Complete and accurate work performed efficientlyProduction quality and efficiency using...