Press Operator
2 weeks ago
Essential Duties Include:
- Read and understand "Change Spec. Card Procedure"
- Read and understand "Non-Conforming Product Procedure"
- Get magnets from magnet board that contains the work order information for production
- Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions
- Determine and obtain the correct tool for the job identified on the Spec. Card from the tooling rack
- Remove tooling from box, attach bearer blocks and slide into tooling station
- Set the machine for the appropriate job
- Retain Supplier raw material tag with lot # and run # information along with "Approved for Use" tags on separate sheet of paper (if only using partial material and retuning excess material do not retain tag, just record part #, lot # and run # on sheet)
- Complete "Sign-off Check List" (if operator has less than 1-year experience, needs sign-off from experienced operator with over 1 year experience)
- Print out (core tags or box tags) along with 1st piece and last piece labels with correct information,
- Make sure the right material is used where needed, to the proper side of the liner and in the right orientation
- Place material in machine. Feed it through the fife guide and adjust it for center run.
- Place adhesive in machine and line-up with materials so that they are even with each other
- Start machine, adjust tension and alignment as needed
- Pass the material through to the die cutting station
- Remove any waste or air-injection from the tool
- Adjust nip-roller speed for proper speed and dimensions of part
- Verify part to print and or mylar and record dimensions
- Retain first approved piece and place label on back side
- Complete In-Process check sheet during the run.
- Complete End-of-Run sign off confirming the required parts were produced.
- Retain last approved piece and label back side
- Maintain a clean and safe work area, cleaning floor, machine, work area at end of each job and at end of shift
- Cut cores for particular jobs when needed. Obtain boxes and materials necessary for job
- Operate production equipment to produce good, quality product in an efficient/quality-oriented manner.
- Makes suggestions for ways to improve production process
- Works with sales and estimating to test/run samples for new product introduction
- Makes sure product being produced matches the spec card and the degree of quality needed (tolerances etc..)
- Updates spec card for future runs when process is changed
- Observe machine operation to detect workpiece defects or machine malfunctions; adjust machines as necessary.
- Change worn machine accessories such as cutting tools and brushes, using hand tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, changing filters or adding lubricant to the Rotary press when necessary.
- Notify supervisors when major service is required.
- Other duties as assigned.
High school diploma or equivalent
Requirements
Essential Duties Include:
- Read and understand "Change Spec. Card Procedure"
- Read and understand "Non-Conforming Product Procedure"
- Get magnets from magnet board that contains the work order information for production
- Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions
- Determine and obtain the correct tool for the job identified on the Spec. Card from the tooling rack
- Remove tooling from box, attach bearer blocks and slide into tooling station
- Set the machine for the appropriate job
- Retain Supplier raw material tag with lot # and run # information along with "Approved for Use" tags on separate sheet of paper (if only using partial material and retuning excess material do not retain tag, just record part #, lot # and run # on sheet)
- Complete "Sign-off Check List" (if operator has less than 1-year experience, needs sign-off from experienced operator with over 1 year experience)
- Print out (core tags or box tags) along with 1st piece and last piece labels with correct information,
- Make sure the right material is used where needed, to the proper side of the liner and in the right orientation
- Place material in machine. Feed it through the fife guide and adjust it for center run.
- Place adhesive in machine and line-up with materials so that they are even with each other
- Start machine, adjust tension and alignment as needed
- Pass the material through to the die cutting station
- Remove any waste or air-injection from the tool
- Adjust nip-roller speed for proper speed and dimensions of part
- Verify part to print and or mylar and record dimensions
- Retain first approved piece and place label on back side
- Complete In-Process check sheet during the run.
- Complete End-of-Run sign off confirming the required parts were produced.
- Retain last approved piece and label back side
- Maintain a clean and safe work area, cleaning floor, machine, work area at end of each job and at end of shift
- Cut cores for particular jobs when needed. Obtain boxes and materials necessary for job
- Operate production equipment to produce good, quality product in an efficient/quality-oriented manner.
- Makes suggestions for ways to improve production process
- Works with sales and estimating to test/run samples for new product introduction
- Makes sure product being produced matches the spec card and the degree of quality needed (tolerances etc..)
- Updates spec card for future runs when process is changed
- Observe machine operation to detect workpiece defects or machine malfunctions; adjust machines as necessary.
- Change worn machine accessories such as cutting tools and brushes, using hand tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, changing filters or adding lubricant to the Rotary press when necessary.
- Notify supervisors when major service is required.
- Other duties as assigned.
Education:
High school diploma or equivalent
-
Set Up Brake Press Operator
1 week ago
Grand Rapids, United States Elwood Staffing Full timeAn international manufacturer of point of purchase displays and decorative wire products is looking to add a Set-Up Break Press Operator to their team. Apply today to learn more! Company Profile. Our client is an international manufacturer of point o Press Operator, Brake Press, Press, Operator, Staffing, Production
-
Set Up Brake Press Operator
2 weeks ago
Grand Rapids, United States Elwood Staffing Full timeAn international manufacturer of point of purchase displays and decorative wire products is looking to add a Set-Up Break Press Operator to their team. Apply today to learn more! Company Profile. Our client is an international manufacturer of point o Press Operator, Brake Press, Press, Operator, Staffing, Production
-
Brake Press Operator
3 days ago
Grand Rapids, United States Metal Components Full timeJob DescriptionJob DescriptionJob Title: Press Brake OperatorDepartment: ManufacturingReports To: Shift SupervisorFLSA Status: Non-exempt SUMMARYSet up and operate press brake to bend, notch, punch, form roll, arc or straighten metal plates or sheet metal, following structural blueprint or sketch specifications, complying with quality standards.PRIMARY...
-
Press Operator
1 month ago
Grand Rapids, United States Boyd Full timeJob Description Essential Duties Include: Read and understand “Change Spec. Card Procedure” Read and understand “Non-Conforming Product Procedure” Get magnets from magnet board that contains the work order information for production Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and...
-
Automatics Press Operator
1 week ago
Grand Rapids, United States Ridgeview Industries, Inc. Full timeIf you are looking for an organization committed to the principles of Excellence, Integrity, Faith, and Teamwork, then Ridgeview Industries offers a challenging and rewarding employment opportunity for you. Ridgeview Industries is a leading metal stamping and assembly supplier primarily serving the automotive market. We currently employ approximately 600...
-
Automatic Press Operator
2 weeks ago
Grand Rapids, United States Pridgeon & Clay Inc Full timeJob DescriptionJob DescriptionAre you looking for a challenging yet rewarding career that allows you to utilize your skills to their fullest potential? Do you want to join a team of hardworking, enthusiastic and creative people and enjoy working with a company that recognizes and embraces diversity? Do you take pride working with a company that is committed...
-
Case Press Operator
4 weeks ago
Grand Island, United States Essential Personnel Inc Full timeAre you wanting to work for a family owned company? Essential Personnel is seeking candidates to fill Case Press Operator positions at a company in Grand Island. Candidates must have at least 1-2 years manufacturing or machine operating experience. A Press Operator, Press, Operator, Mechanical, Staffing, Manufacturing
-
Press Brake Operator
2 days ago
Grand Prairie, United States Aerotek Full time**Description:**• Receive flat material.• Form specific part utilizing the break press to form the contour of the material.• Store material in a designated area.• May utilize crane to maneuver material to be formed with the break press.• This position may require working with another worker.• Ability to communicate effectively and demonstrates...
-
Press Operator
5 days ago
Sioux Rapids, United States Ascend Staffing Full timeApply today, work tomorrow, get paid weekly! Want to be paid each week? We re now hiring immediately for our Press Brake Operator job in Sioux Rapids, IA. What We Offer. Weekly Pay of $18.00-$25.00 per hour depending on experience. Direct deposit & d Press Operator, Operator, Media, Press, Production Associate, Staffing, Manufacturing
-
Brake Press Operator-2nd Shift
5 days ago
Grand Rapids, United States Plasan North America Full timeJob DescriptionJob DescriptionMonday-Thursday 3 pm -1 am 4-10 work schedule POSITION REQUIREMENTS (Required Tasks)Setup and document tooling and safe practices for Brake Press operations.Verify accuracy of machine settings to confirm accurate tolerances and machine functions. Required to maintain accurate parts and motivation on routine repetitive jobs....
-
Press Brake Operator
2 weeks ago
Grand Prairie, United States Skilled Craftsmen of Texas, Inc. Full timeJob DescriptionJob DescriptionM- F2:30 PM - 11:00 PM$15-$19/HRDuties:Receive flat material.Form specific part utilizing the break press to form the contour of the material.Store material in a designated area.May utilize crane to maneuver material to be formed with the break press.This position may require working with another worker.Ability to communicate...
-
Press Setup Operator D-Global
5 hours ago
Roanoke Rapids, United States Kennametal Full timeWith over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately...
-
Press Setup Operator D-Global
2 days ago
Roanoke Rapids, United States Kennametal, Inc. Full timeWith over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day...
-
2nd Shift
2 weeks ago
Grand Haven, United States Automatic Spring Products Corporation Full timeJob DescriptionJob DescriptionESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.To perform routine operation of the press(s), the auxiliary equipment, and general maintenance of the press(s).To perform all required shift start up and shift end functions.To perform all required Q.C. checks.To make minor adjustments to...
-
Processing -Machine Operator (Press Brake)
4 weeks ago
Grand Prairie, United States MDMartin Full timeJob DescriptionJob DescriptionSummary: They will be operating a press brake machine to shape multiple types of metal, primarily sheet metal. To do so, the operators load pieces of metal into the machine for shaping or straightening, aligning and positioning the material to achieve specific shapes.Requirements: · Bilingual- Speak and understand English...
-
Digital Print, Diecut, Glue Operator
4 weeks ago
Grand Rapids, United States ColorHub Full time**About ColorHub**: ColorHub is an industry shaking corrugated printing company in Grand Rapids, Michigan. We produce high quality corrugated boxes, retail displays, and signage for small and big companies alike. We’re looking for highly-motivated people to join our tight knit team and run state of the art equipment. **As a Digital Print, Diecut, and...
-
Brake Press Team Lead
3 days ago
Grand Rapids, United States Plasan North America Full timeJob DescriptionJob DescriptionMonday-Thursday 5 am - 3pm POSITION REQUIREMENTS (Required Tasks)Setup and document tooling and safe practices for Brake Press operations.Verify accuracy of machine settings to confirm accurate tolerances and machine functions. Required to maintain accurate parts and motivation on routine repetitive jobs. Required to maintain...
-
Brake Press Operator
2 months ago
Grand Rapids, United States Metal Components Full timeJob DescriptionJob DescriptionMetal Components strives to be an employer of choice. Our small business creates a family feel and a career path for team members. By joining our team, you will receive compensation for your position as well as opportunities to grow. Metal Components desires candidates that have a great mindset and skillset. Please see job...
-
Press Operator
4 weeks ago
Eaton Rapids, United States Dowding Industries Full timeJob DescriptionJob DescriptionTitle: Press Operator Status: Full-time, Non-exemptManages Others: NoReports to: Production SupervisorTravel: NoneAbout UsSince 1965, Dowding has grown from a tool and die manufacturer to a leading edge, world-class manufacturer of metal stampings, fabrication, precision machined components, and assemblies. We capitalize on our...
-
Press Operator
13 hours ago
Eaton Rapids, United States Dowding Industries, Inc. Full timeTitle: Press OperatorStatus: Full-time, Non-exemptManages Others: NoReports to: Production SupervisorTravel: NoneAbout UsSince 1965, Dowding has grown from a tool and die manufacturer to a leading edge, world-class manufacturer of metal stampings, fabrication, precision machined components, and assemblies. We capitalize on our rich manufacturing history and...