See more Collapse

Calibration Engineer

1 month ago

Auburn Hills, United States Capgemini Full time

Job Location: Chelsea MI (Onsite role)

Job Description:

We are looking for Mechanical and Physical Engineer- Drivability Development Engineer who will be carrying out and analysis of tests intended for the calibration or validation of the Drivability and Engine-Gearbox Intersystem functions (characterization of the powertrain, idle speed PIV, anti-lock, PIV IS, not exhaustive). Engaging in development missions (hot; cold; temperate; altitude) and is proficient in preparation and dissemination of reports, Acquisition data filing and Store the analysis results into a database and examination of the issues encountered during the development process

Key Responsibilities:
Expert in development of precautionary, balanced solutions, update of the repositories and carry over policy. Specification and coding of solutions for automatic processing of validation tests or from the data lake.
Idle speed calibration (rpm, regulation)
Calibration of component protection strategies and functions.
BVM/BVMP/BVA take-off and brio (smoke mapping, anti-droop, idle adaptability)
Proficient in System Validation, Engine side anti-stall pre-calibration, Calibration of the close control and Basic PWT adaptation and System calibration and PWT functional integration
Follow-up of functional and inter-system validation tests and follow-up of supplier development activities
Proficiency in Calibration of BVA gear changes: stable foot, throttle release, pedal depression with different Lock-up states in Drive and CMI , Calibration of commitments under all vehicle operating conditions, Calibration of gearbox self-adaptive devices, Torque bypass calibration. Anti-overspeed calibration and Calibration of temperature patches, drag reduction, turbine torque recovery function, calibration safety.
Validation of engine and PWT behavior (quality of torque exchange, compliance with gearbox requirements, compliance with rpm instructions, etc.) during gear shifts
Validation of intra-PWT and PWT-vehicle exchanges (flow, quality) and Engine software validation at each project phase
System calibration (converter status, ratio, gearbox learning, etc.), Calibration and validation of PWT degraded modes and behavior in Lock-up management phases and become proficient in the calibration of learning (transmissibility, kisspoint, grid, synchro point, clutch actuator) and the thermal models (clutch, hydraulics)
Proficient in Thermal model's calibrations (clutch, hydraulic oil) and Take-off Calibration, Clutch opening/closing calibration without and with gearshift and of torque blending functions, Calibration of hyper shift mode gear shifts and of automatic switch thresholds, Warm up calibrations and verifications, Inter-system optimization, Engine Torque accuracy verification and Fine-tune calibration and anti-lock validation, Drivability objective evaluation, ADAS interactions
Required Skills:
Bachelors degree in mechanical or electrical engineering and IC in electrical engineering
Proficient skills in Inca, MDA, Creta, Concerto, Optisim work environments
Permits necessary for carrying out tests (driving, electrical, etc.) if necessary.
Good knowledge of office tools (MS office pack) along with knowledge of electrical concepts and multiplexing system and PID Control Systems
Valid Driver's License and engine inter-system

Life at Capgemini

Capgemini supports all aspects of your well-being throughout the changing stages of your life and career. For eligible employees, we offer:

- Flexible work

- Healthcare including dental, vision, mental health, and well-being programs

- Financial well-being programs such as 401(k) and Employee Share Ownership Plan

- Paid time off and paid holidays

- Paid parental leave

- Family building benefits like adoption assistance, surrogacy, and cryopreservation

- Social well-being benefits like subsidized back-up child/elder care and tutoring

- Mentoring, coaching, and learning programs.

- Employee Resource Groups

- Disaster Relief

About Capgemini Engineering

World leader in engineering and R&D services, Capgemini Engineering combines its broad industry knowledge and cutting-edge technologies in digital and software to support the convergence of the physical and digital worlds. Coupled with the capabilities of the rest of the Group, it helps clients to accelerate their journey towards Intelligent Industry. Capgemini Engineering has more than 55,000 engineer and scientist team members in over 30 countries across sectors including Aeronautics, Space, Defense, Naval, Automotive, Rail, Infrastructure & Transportation, Energy, Utilities & Chemicals, Life Sciences, Communications, Semiconductor & Electronics, Industrial & Consumer, Software & Internet.

Capgemini Engineering is an integral part of the Capgemini Group, a global leader in partnering with companies to transform and manage their business by harnessing the power of technology. The Group is guided every day by its purpose of unleashing human energy through technology for an inclusive and sustainable future. It is a responsible and diverse organization of over 360,000 team members in more than 50 countries. With its strong 55-year heritage and deep industry expertise, Capgemini is trusted by its clients to address the entire breadth of their business needs, from strategy and design to operations, fueled by the fast evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering, and platforms. The Group reported in 2022 global revenues of €22 billion.

Get the Future You Want

Disclaimer

Capgemini is an Equal Opportunity Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law.

This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodations do not pose an undue hardship.

Capgemini is committed to providing reasonable accommodations during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact.

Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process.

Applicants for employment in the US must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the US by Capgemini.

Job Programmer/Analyst
Schedule Full-time
Primary Location US-MI-Auburn Hills
Organization ERD PPL US

We have other current jobs related to this field that you can find below

  • Calibration Engineer

    2 months ago

    Auburn Hills, United States Omni Inclusive Full time

    Responsibilities include: • Developing and verification of calibrations within Power-moding and LV/HV charging functional areas • Performing vehicle testing to achieve calibration maturity at each of the vehicle milestones of the program • Working closely with the STELLANTIS COC to review both issues with functional area, integration, and follow...

  • Calibration Engineer

    4 weeks ago

    Auburn Hills, United States Zobility Full time

    Job Description: As a Drivability Calibration Engineer, you will primarily be responsible for conducting vehicle-based calibration and evaluation of hybrid powertrains and EVs for light-duty to heavy-duty applications.The engineer will be responsible for planning experiments, setup and data acquisition, analyzing and interpreting results to guide future...

  • Calibration Engineer

    2 weeks ago

    Auburn Hills, United States Zobility Full time

    Job Description: As a Drivability Calibration Engineer, you will primarily be responsible for conducting vehicle-based calibration and evaluation of hybrid powertrains and EVs for light-duty to heavy-duty applications.The engineer will be responsible for planning experiments, setup and data acquisition, analyzing and interpreting results to guide future...

  • Calibration Engineer

    2 weeks ago

    Auburn Hills, United States RGBSI Full time

    Job Description:As an Autodrive Calibration/Functional Integration engineer, you will play a critical role in standing up the company's first in house ADAS calibration team by solving the integration issues calibrating L0-L3 ADAS features through the following:Work closely with the in-house software teams to develop a functional understanding of the...

  • Calibration Engineer

    2 weeks ago

    Auburn Hills, United States RGBSI Full time

    Job Description:As an Autodrive Calibration/Functional Integration engineer, you will play a critical role in standing up the company's first in house ADAS calibration team by solving the integration issues calibrating L0-L3 ADAS features through the following:Work closely with the in-house software teams to develop a functional understanding of the...

  • Core Engine Calibration Engineer

    2 months ago

    Auburn Hills, United States Capgemini Full time

    Core Engine Calibration Engineer-076187 Description Job Description: Looking for motivated Engineers who will be responsible for Calibration and Validation of Core Engine functions supporting BSG, PHEV, ICE variants. Job Responsibilities: The candidate is responsible for supporting commissioning of test properties (Dynamometers) at...

  • Calibration Release Engineer

    2 months ago

    Auburn Hills, United States LER TechForce Full time

    We have a need for a Calibration Release Engineer to work in Chelsea Michigan. This role will require the person to be full time in Chelsea (outside of Ann Arbor). The Calibration Release Engineer will be the responsible for the development, timing, and production release of engine components. The release engineer will ensure project calibration release...

  • Calibration Engineer

    2 weeks ago

    Auburn Hills, United States Reliance One Full time

    Job Requirements Work closely with the in-house software teams to develop a functional understanding of the algorithms and software in the various ADAS features Develop calibration guides for each feature and sub-feature Lead the initial triage of system integration issues, discovery and resolution of software bugs, gaps in specifications, and specification...

  • Calibration Engineer

    3 weeks ago

    Auburn Hills, United States Reliance One, Inc. Full time

    Job RequirementsWork closely with the in-house software teams to develop a functional understanding of the algorithms and software in the various ADAS featuresDevelop calibration guides for each feature and sub-featureLead the initial triage of system integration issues, discovery and resolution of software bugs, gaps in specifications, and specification...

  • Calibration Engineer

    3 weeks ago

    Auburn Hills, United States Reliance One, Inc. Full time

    Job RequirementsWork closely with the in-house software teams to develop a functional understanding of the algorithms and software in the various ADAS featuresDevelop calibration guides for each feature and sub-featureLead the initial triage of system integration issues, discovery and resolution of software bugs, gaps in specifications, and specification...

  • Core Engine Calibration Engineer

    1 week ago

    Auburn Hills, United States Capgemini Full time

    Job Description: Looking for motivated Engineers who will be responsible for Calibration and Validation of Core Engine functions supporting BSG, PHEV, ICE variants. Job Responsibilities: The candidate is responsible for supporting commissioning of test properties (Dynamometers) at Client sites and collaborate with logistics, test technology team ensuring...

  • Core Engine Calibration Engineer

    1 week ago

    Auburn Hills, United States Capgemini Full time

    Job Description:Looking for motivated Engineers who will be responsible for Calibration and Validation of Core Engine functions supporting BSG, PHEV, ICE variants. Job Responsibilities:The candidate is responsible for supporting commissioning of test properties (Dynamometers) at Client sites and collaborate with logistics, test technology team ensuring...

  • Core Engine Calibration Engineer

    21 hours ago

    Auburn Hills, United States Capgemini Full time

    Job Description:Looking for motivated Engineers who will be responsible for Calibration and Validation of Core Engine functions supporting BSG, PHEV, ICE variants. Job Responsibilities:The candidate is responsible for supporting commissioning of test properties (Dynamometers) at Client sites and collaborate with logistics, test technology team ensuring...

  • Core Engine Calibration Engineer

    2 months ago

    Auburn Hills, United States Capgemini Engineering Full time

    Life at Capgemini Capgemini supports all aspects of your well-being throughout the changing stages of your life and career.For eligible employees, we offer:Flexible workHealthcare including dental, vision, mental health, and well-being programs.Financial well-being programs such as 401(k) and Employee Share Ownership PlanPaid time off and paid holidays.Paid...

  • Powertrain Calibration Engineer

    3 weeks ago

    Auburn Hills, United States Flex Workforce Solutions Full time

    Job DescriptionJob DescriptionPowertrain Calibration EngineerRequired Qualifications:Bachelor's degree in Mechanical/Automotive Engineering, Electrical/Electronics Engineering, or a related field, with a Master's degree preferred10+ years of experience in calibration and/or powertrain developmentStrong fundamentals in thermodynamics, fluid mechanics,...

  • Drivability Calibration Engineer

    1 month ago

    Auburn Hills, United States Advantage Technical Full time

    Job title: Project Engineer / Drivability Calibration Engineer Location: Chelsea/Ann Arbor Onsite Flexibility: Hybrid Contract to Hire $36-50 per hourJob Description As a Drivability Calibration Engineer, you will primarily be responsible for conducting vehicle-based calibration and evaluation of hybrid powertrains and EVs for light-duty to heavy-duty...

  • Drivabilty and Calibration Engineer

    2 months ago

    Auburn Hills, United States LER TechForce LLC Full time

    Are you looking to work for a company that provides an innovative work environment, and your voice is heard? We have a need for a Calibration Drivability Emission Engineer to work in Chelsea. This role does require the person to be onsite. We are able to sponsor for this role. Who we are: For over 20 years LER has been working with customers across North...

  • ADAS Calibration Engineer

    3 weeks ago

    Auburn Hills, United States Zobility Full time

    As an Autodrive Calibration/Functional Integration engineer, you will play a critical role in standing up the company’s first in house ADAS calibration team by solving the integration issues calibrating L0-L3 ADAS features through the following:Work closely with the in-house software teams to develop a functional understanding of the algorithms and...

  • ADAS Calibration Engineer

    3 weeks ago

    Auburn Hills, United States Zobility Full time

    As an Autodrive Calibration/Functional Integration engineer, you will play a critical role in standing up the company’s first in house ADAS calibration team by solving the integration issues calibrating L0-L3 ADAS features through the following:Work closely with the in-house software teams to develop a functional understanding of the algorithms and...

  • Sr. Project Engineer-Calibration Release

    2 months ago

    Auburn Hills, United States Venteon Full time

    We were recently engaged in a new search for a Sr. Project Engineer-Calibration Release Coordinator with a growing client in Auburn Hills, MI.Location: Auburn HillsTitle: Sr. Project Engineer-Calibration Release CoordinatorWorking Arrangement: HybridPosition: Contract to hire.As a Senior Project Engineer specializing in the advancement of conventional and...