Welding Engineer
3 weeks ago
Position Summary:The role of Weld Engineer is to support the needs of manufacturing by reviewing new product plans and make recommendations for material selection and welding solutions based on various project criteria. Key Responsibilities:Provide innovative, technically significant and economically important material and welding solutions in support of manufacturing and design.Identify, evaluate and resolve non-routine materials joining and manufacturing engineering problems as they related to non-traditional repair work in an accurate, timely and informed manner.Proactively seek and accept responsibility for solving new and difficult materials joining and manufacturing engineering challenges, while appropriately assessing and managing risks.Review new product plans and make recommendations for material selection based on design objectives, such as strength, weight, heat resistance electric conductivity and cost.Plan and evaluate new projects, consulting with other engineers, project planners and corporate executives as needed.Identify new and/or improved welding processes/techniques for improving Holtec applications.Work with design and manufacturing engineering to resolve materials joining issues before and during manufacturing and provide technical support to suppliers and customers.Provide support to identify and troubleshoot equipment problems.Monitor material performance and evaluate material deterioration. Analyze product failure data and laboratory test results to determine causes of problems and develop solutions.Participate in the testing or control of materials processing procedures.Prepare proposals and budgets, write reports.Evaluate technical specifications and economic factors relating to process or product design objectives.Other duties as assigned.Physical Demands & Abilities:Able to provide welding activity support through active participation on the production floor or in an office environment to include climbing ladders or stairs, standing, sitting, crouching, bending, reaching, and lifting of up to 50 pounds.Supports:Weld Engineering Manager, General Manager, Department Managers, Production Supervision, Project Managers, Designers, WeldersMinimum Qualifications:Bachelor's Degree in Welding Engineering from an accredited institution with a minimum of two (2) years of welding engineering experience in a manufacturing environment or related experience. Knowledge of and experience with weld symbols and reading fabrication drawings.Professional demeanor, innovative thinker with the ability to present ideas, concepts and theories to all levels.Good communication and presentations skills (written and verbal).Ability to travel 10-20% of the time.Preferred Qualifications:Prior welding experience preferred.Knowledge of: ASME Section III & IX; AWS D1.1, D1.2 & D1.6; MIL-STD 248/278.Certified Welding Inspector
-
Welding Engineer
3 months ago
Camden, United States Holtec International Full timeJob DescriptionJob DescriptionPosition Summary:The role of Weld Engineer is to support the needs of manufacturing by reviewing new product plans and make recommendations for material selection and welding solutions based on various project criteria. Key Responsibilities:Provide innovative, technically significant and economically important material and...
-
Welding Solutions Engineer
2 weeks ago
Camden, New Jersey, United States Holtec International Full timePosition Overview: The Welding Engineer plays a crucial role in enhancing manufacturing processes by assessing new product designs and providing expert recommendations on material choices and welding methodologies tailored to specific project requirements. Core Responsibilities: Deliver innovative and technically robust material and welding strategies that...
-
Welding Solutions Engineer
2 weeks ago
Camden, New Jersey, United States Holtec International Full timePosition Overview: The Weld Engineer plays a crucial role in enhancing manufacturing processes by assessing new product designs and providing expert recommendations on material choices and welding methodologies tailored to specific project requirements. Core Responsibilities: Deliver innovative and economically viable material and welding strategies to...
-
Welding Solutions Engineer
2 weeks ago
Camden, New Jersey, United States Holtec International Full timePosition Overview:The Weld Engineer plays a crucial role in enhancing manufacturing operations by assessing new product designs and providing expert recommendations on material choices and welding techniques tailored to specific project requirements.Core Responsibilities:Deliver innovative and economically viable material and welding solutions that align...
-
Welding Solutions Engineer
2 weeks ago
Camden, New Jersey, United States Holtec International Full timePosition Overview: The Welding Engineer plays a crucial role in enhancing manufacturing processes by evaluating new product designs and providing expert recommendations on material choices and welding techniques tailored to specific project requirements. Core Responsibilities: Deliver innovative and economically viable material and welding solutions that...
-
Mechanical Engineer
4 months ago
Camden, United States Penn Technical Staffing Full timeA Camden, NJ based manufacturer of pressure vessels and related products is seeking a Project Engineer to join their team. This person will be responsible for creating models and fabrication drawings using a solid modeling program (e.g. SolidWorks, Autodesk Inventor). Job Requirements: BS in Mechanical Engineering; Metal fabrication experience; understanding...
-
Quality Control Inspector
2 months ago
Camden, United States Holtec International Full timeRole and ResponsibilitiesThe Quality Inspector will be responsible for but not limited to, performing NDE inspections on projects in addition to other non-NDE activities that may be requested. Conduct weld inspections in accordance with written procedures and acceptance criteria then complete applicable paperwork. Conduct mechanical inspections using hand...
-
Quality Control Inspector
2 months ago
Camden, United States Holtec International Full timeRole and Responsibilities The Quality Inspector will be responsible for but not limited to, performing NDE inspections on projects in addition to other non-NDE activities that may be requested. Conduct weld inspections in accordance with written procedures and acceptance criteria then complete applicable paperwork. Conduct mechanical inspections using...
-
Quality Assurance Inspector
5 days ago
Camden, New Jersey, United States Holtec International Full timeJob SummaryWe are seeking a highly skilled Quality Assurance Inspector to join our team at Holtec International. As a Quality Assurance Inspector, you will be responsible for ensuring the quality of our products and services by performing non-destructive testing and inspections.Key ResponsibilitiesPerform non-destructive testing (NDT) inspections on projects...
-
Non-Destructive Testing Specialist
6 days ago
Camden, New Jersey, United States Holtec International Full timeJob SummaryWe are seeking a highly skilled Quality Assurance Inspector to join our team at Holtec International. As a Quality Assurance Inspector, you will be responsible for ensuring the quality of our products and services by performing non-destructive testing and inspections.Key ResponsibilitiesPerform non-destructive testing (NDT) inspections on...
-
Quality Control Inspector
3 months ago
Camden, United States Holtec International Full timeJob DescriptionJob Description Role and Responsibilities The Quality Inspector will be responsible for but not limited to, performing NDE inspections on projects in addition to other non-NDE activities that may be requested.Conduct weld inspections in accordance with written procedures and acceptance criteria then complete applicable paperwork. Conduct...
-
Metal Fabrication Specialist
2 weeks ago
Camden, New Jersey, United States AmeriTech Staffing, Inc. Full timeMetal Fabrication Specialist Job OpeningAmeriTech Staffing, Inc. is on the lookout for a talented Metal Fabrication Specialist to enhance our workforce. This role is ideal for individuals looking to advance their careers in a dynamic manufacturing environment.Key Responsibilities:Interpret and analyze technical schematics to ensure all components adhere to...
-
Quality Control/NDE Inspector Level II
7 days ago
Camden, United States Holtec International Full timeRole and Responsibilities The Quality Inspector will be responsible for but not limited to, performing NDE inspections on projects in addition to other non-NDE activities that may be requested. Conduct weld inspections in accordance with written procedures and acceptance criteria then complete applicable paperwork. Conduct mechanical inspections using...
-
Mechanical Design Engineer
3 months ago
East Camden, United States Armtec Defense Technologies Full timeJob DescriptionJob DescriptionArmtec Defense Technologies (Armtec) is an operating unit of the Transdigm Group (NYSE: TDG), an industry leader in aerospace and defense products and services. Armtec is comprised of three business units producing subcomponents for ordnance in Coachella, CA; decoy countermeasure Flares in Camden AR; and radar countermeasure...
-
Quality Control/NDE Inspector Level II
3 months ago
Camden, United States Holtec International Full timeJob DescriptionJob Description Role and Responsibilities The Quality Inspector will be responsible for but not limited to, performing NDE inspections on projects in addition to other non-NDE activities that may be requested.Conduct weld inspections in accordance with written procedures and acceptance criteria then complete applicable paperwork. Conduct...
-
Non-Destructive Evaluation Specialist
2 days ago
Camden, New Jersey, United States Holtec International Full timeJob SummaryThe Quality Control/NDE Inspector Level II will be responsible for performing NDE inspections on projects, as well as other non-NDE activities as requested by the company. This role requires a systematic approach to work, with a focus on detail and minimal supervision.Key Responsibilities• Conduct weld inspections in accordance with written...
-
CNC Programmer
2 months ago
Camden, United States Holtec International Full timeThe primary purpose of the CAD/CAM Programmer position is to review drawings and create the CAM programs using AutoCAD, Solidworks, Sigmanest and Mastercam. In addition, the CAD/CAM Programmer verifies machining programs match drawing interpretation and symbols, and supports Project Management by monitoring machining outcomes in the shop.Essential Job...
-
CNC Programmer
2 months ago
Camden, United States Holtec International Full timeJob DescriptionJob DescriptionThe primary purpose of the CAD/CAM Programmer position is to review drawings and create the CAM programs using AutoCAD, Solidworks, Sigmanest and Mastercam. In addition, the CAD/CAM Programmer verifies machining programs match drawing interpretation and symbols, and supports Project Management by monitoring machining outcomes in...
-
Supplier Quality Field Representative
3 days ago
Camden, New Jersey, United States Lockheed Martin Full timeJob SummaryWe are seeking a highly skilled Supplier Quality Field Representative to join our team at Lockheed Martin. As a key member of our quality assurance team, you will be responsible for ensuring the highest level of quality in our supplier relationships.Key ResponsibilitiesPerform on-site product source inspections, first articles, and product line...
-
Multicraft Technician Camden, SC
3 months ago
Camden, United States CUP Acquisition LLC Full timeJob DescriptionJob DescriptionDescription:Company Overview:Custom Profile is an employee-owned company that develops and manufactures specialty thermoplastic profile extrusions and sub-assemblies with locations in Grand Rapids, Michigan, Camden, SC and Juarez, Mexico. Our in-house tooling design and fabrication allows for complete control of quality and...