Mill Machinist 1st Shift

2 weeks ago

Chester, United States Aerocision Full time
4 Day Work Week
  • Set up and operate CNC milling machines (3, 4 and 5 axis)
  • Verify tool lengths (including: setting of tool geometries and offsets)
  • Set up and change fixtures, clamp fixtures and clamps as required
  • Load and unload of fixtures using overhead cranes, slings, chains etc.
  • Adjustment of offsets
  • Produce conforming first piece products to process drawing and quality specifications
  • Achieve specified quality standards
  • Report any issues or problems to Supervision immediately
  • Work within the designated workgroup to plan, prioritize and perform work to satisfy customer and company needs
  • Carry out daily TPM activities as required
  • Execute a 'Zero Defects' & 'Right First time' culture.
  • Propose Operational Excellence & Continuous Improvements to management.
  • Provide Root Cause & Corrective Action (RCCA) support.
Ensure parts are handled and protected in a suitable manner to prevent damage during operations and movement.

Comply with any other guidelines as defined in the Employee Handbook.
  • Comply with company housekeeping standards.
  • Adhere to company EH&S Policies.
  • To perform other such duties as generally correspond to the nature of the position and its level of responsibility.
Requirements

AeroCision, LLC is a covered federal contractor

All offers are contingent on a successful completion of a
  • A background check with results acceptable to the Company. An authorization and relevant forms will be forthcoming
  • A post-offer drug screen with a negative result
  • A post-offer physical assessment

AeroCision is an Equal Opportunity Employer including Veterans and Individuals with Disabilities and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process. We only accept applications or resumes for current open positions. If you have any difficulty using our online system and you need an accommodation due to a disability, you may contact Taylor Rose in the Human Resources Department at trose@aerocision.com to contact us about your interest in employment. This option is reserved for individuals who are unable to use or require assistance as the result of a disability and is not intended for other purposes.

  • CNC Milling Machinist

    6 days ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist

    6 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • 1st Shift CNC Machinist/Programmer

    2 months ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • 1st Shift CNC Machinist/Programmer

    2 months ago

    Chester, United States New Life Staffing, LLC Full time

    Newlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting up and running conventional...

  • CNC Milling Machinist 2nd Shift

    6 days ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist 2nd Shift

    6 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist 2nd Shift

    7 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist (2nd Shift) Shift: 2nd | Hours: 3:30 pm - 11pm Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: Manufacturing Our Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision. Job...

  • 2nd Shift CNC Machinist/Programmer

    1 month ago

    Chester, United States New Life Staffing LLC Full time

    Job DescriptionJob DescriptionDescription:New Life Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible...

  • 2nd Shift CNC Machinist/Programmer

    2 weeks ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • 2nd Shift CNC Machinist/Programmer

    2 weeks ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • 2nd Shift CNC Machinist/Programmer

    1 day ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • CNC Lathe Machinist

    1 month ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Lathe Machinist

    3 weeks ago

    Chester, United States Gables Search Group Full time

    Position: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Lathe Machinist

    2 weeks ago

    Chester, United States Gables Search Group Full time

    Position: CNC Lathe Machinist (2nd Shift) Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: Manufacturing Our Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision. Job...

  • CNC Machinist Set-up

    6 days ago

    Chester Springs, United States TheMasonGroup Full time

    Job DescriptionJob DescriptionCNC MachinistAre you ready to break free of the mundane?Seeking a clear path to grow?Seeking a career with a purpose that will bring value to the community, people, and organizations?Giving you the opportunity to continuously innovate?Where you can be part of a company that knows developing an amazing team makes all the...

  • Machinist

    3 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...

  • Machinist

    3 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...

  • Machinist

    2 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard Inc Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. This position requires the use of metal working...

  • Machinist

    3 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard Inc Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. This position requires the use of metal working...

  • CMM Operator

    3 weeks ago

    Chester, United States AeroCision, LLC Full time

    Execute inspection plans for first piece, in-process, and final inspection - Use manual and automated metrology equipment to measure products, tools, and fixtures - Trouble shoot measurement techniques and make recommendations for improvements to Eng Operator, Inspector, 1st Shift, Operations, Manufacturing