CNC Lathe Machinist

3 weeks ago

Chester, United States Gables Search Group Full time

Position: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job Responsibilities: Set up and operate CNC Lathe machines (Horizontal and/or Vertical). Verify tool lengths (including: setting of tool geometries and offsets). Set up and change fixtures, clamp fixtures and clamps as required. Load and unload fixtures using overhead cranes, slings, chains etc. Adjustment of offsets. Produce conforming first piece products to process drawing and quality specifications. Achieve specified quality standards. Hold tight tolerances on large 28+ parts Proficiently use a variety of manual gauges which includes but not limited to swing gauges, callipers and OD mics. Conform to specified health and safety standards. Report any issues or problems to Supervision immediately. Work within the designated workgroup to plan, prioritize and perform work to satisfy customer and company needs Carry out daily TPM activities as required Provide guidance and assistance to other team members as needed Execute a Zero Defects & Right First time culture. Propose Operational Excellence & Continuous Improvements to management. Provide Root Cause & Corrective Action (RCCA) support. Ensure parts are handled and protected in a suitable manner to prevent damage during operations and movement. Comply with any other guidelines as defined in the Employee Handbook. Comply with company housekeeping standards. Adhere to company EH & S Policies. To perform other such duties as generally correspond to the nature of the position and its level of responsibility. Requirements High School Diploma or GED 5 + years of CNC experience, 2+ years in Lathe/VTL experience preferred. Knowledge in Fanuc and OSP controls

  • CNC Lathe Machinist

    1 month ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • 1st Shift CNC Machinist/Programmer

    1 month ago

    Chester, United States New Life Staffing, LLC Full time

    Newlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting up and running conventional...

  • 1st Shift CNC Machinist/Programmer

    2 months ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • 2nd Shift CNC Machinist/Programmer

    1 month ago

    Chester, United States New Life Staffing LLC Full time

    Job DescriptionJob DescriptionDescription:New Life Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible...

  • 2nd Shift CNC Machinist/Programmer

    2 weeks ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • 2nd Shift CNC Machinist/Programmer

    2 weeks ago

    Chester, United States New Life Staffing, LLC Full time

    Job DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...

  • CNC Milling Machinist

    3 days ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist

    3 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist 2nd Shift

    3 days ago

    Chester, United States International Staff Consulting Full time

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist 2nd Shift

    4 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...

  • CNC Milling Machinist 2nd Shift

    4 days ago

    Chester, United States Gables Search Group Full time

    Position: CNC Milling Machinist (2nd Shift) Shift: 2nd | Hours: 3:30 pm - 11pm Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: Manufacturing Our Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision. Job...

  • CNC Swiss programmer

    1 week ago

    West Chester, United States Infrahire Full time

    Job DescriptionJob DescriptionInfraHire is looking for a CNC Swiss programmer in West Chester, PA.Job Description:The CNC Programmer/Machinist will develop and generate CNC programs for assigned product lines using CAD/CAM software, with occasional macro programming required.A detailed understanding of blueprints is essential, including geometric and...

  • CNC Machinist

    5 days ago

    West Chester, United States Randstad USA Full time

    Job DescriptionJob DescriptionDirect Hire CNC Machinist position available with a large manufacturing company located in West Chester, PADay shift opportunity, 7AM start time Monday - Friday$26-34+/hrResponsibilities Including: Setting up and operating all forms of CNC machinesPerforming quality inspections per SOPCompleting all required...

  • CNC Machinist Set-up

    3 days ago

    Chester Springs, United States TheMasonGroup Full time

    Job DescriptionJob DescriptionCNC MachinistAre you ready to break free of the mundane?Seeking a clear path to grow?Seeking a career with a purpose that will bring value to the community, people, and organizations?Giving you the opportunity to continuously innovate?Where you can be part of a company that knows developing an amazing team makes all the...

  • FAA CNC Machinist Grinding

    1 month ago

    West Chester, United States LanceSoft Full time

    Working days : Friday, Saturday, Sunday.Shift : 2nd shift (06PM TO 06AM).Duration - 03+ months (Temp to Perm)Barnes CNC Machinist - GrindingJob Description- ESSENTIAL DUTIES AND RESPONSIBILITIES: Primary duties are to set-up and operate CNC Grinder, ensuring parts conform to specification and requirements. Monitor parts dimensions using jigs, fixtures,...

  • FAA CNC Machinist Grinding

    2 weeks ago

    West Chester, United States LanceSoft Full time

    Working days : Friday, Saturday, Sunday. Shift : 2nd shift (06PM TO 06AM). Duration - 03+ months (Temp to Perm) Barnes CNC Machinist - Grinding Job Description- ESSENTIAL DUTIES AND RESPONSIBILITIES: Primary duties are to set-up and operate CNC Grinder, ensuring parts conform to specification and requirements. Monitor parts dimensions using jigs, fixtures,...

  • Machinist

    3 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...

  • Machinist

    2 weeks ago

    Chester, United States Marmon Holdings, Inc. Full time

    Hohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...

  • 1st Shift VTL Machinist

    4 weeks ago

    Chester, United States Aerocision Full time

    4 Day Work WeekSet up and operate CNC Lathe machines (Vertical).Verify tool lengths (including: setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.Load and unload fixtures using overhead cranes, slings, chains etc.Adjustment of offsets.Produce conforming first piece products to process drawing and...

  • 1 Shift Manual Machinist

    1 month ago

    Chester, United States Aerocision Full time

    4 Day Work WeekSet up and operate CNC Lathe machines (Horizontal and/or Vertical).Verify tool lengths (including: setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.Load and unload fixtures using overhead cranes, slings, chains etc.Adjustment of offsets.Produce conforming first piece products to process...