Engineer I

3 weeks ago

Brunswick, United States General Dynamics Bath Iron Works Full time

Job Description:

BIWs Life Cycle Engineering Department supports modernization design, construction, and test of in-service Navy DDG 51 and DDG 1000 surface combatants in multiple locations around the world. The DDG 51 Engineering team is seeking an Engineering Technical Point of Contact (TPOC) to provide technical leadership for CS/C4I Ship Alterations.

The successful candidate will perform duties that include, but are not limited to the following:

  • Serve as Technical Point of Contact (TPOC) for Combat System/C4I modernization alterations aboard DDG 51 Class ships as assigned.
  • Interface with the Navy, Navy Contractors, BIW Class Design and BIW management.
  • Assemble Technical Data and Government Furnished Information (GFI) into packages suitable for use by Design for Ship Installation.
  • Provide technical leadership for Ship Installation Drawing (SID) package development for Ship Alterations tasked to Planning Yard and PSA.
  • Support Design in the resolution of waterfront Engineering issues that may arise during installation of Ship Alterations during CNO Availabilities.
  • Brief shipcheck teams to ensure all applicable guidance is followed and accompany the Design team on ship checks as required.
  • Interface with NAVSEA, the NSWCs and other contractors as required in seeking solutions for CS/C4I issues.
  • Participate in off-site meetings and other events on an occasional basis.
  • Participate in special projects and lead technical meetings as assigned.
  • Develop and process Ship Alteration Technical Data in accordance with schedule constraints and GSO compliance.
  • Develop ROM estimates for emergent CS/C4I design and engineering work.
  • Write/review Ship Change Documents (SCD's) for all assigned ShipAlts.
  • Occasional travel is required.

Required/Preferred Education/Training:

  • BS in Engineering is Required.

  • Engineer I - 0-2 years experience preferred.

  • Engineer II - 2 years minimum experience Required.
  • Engineer III - 3 years minimum experience Required.
Required/Preferred Experience:
  • Familiarity with DDG 51 class preferred.
  • Experience in a shipyard, marine, or industrial environment preferred.
  • Familiarity with ship construction and overhaul specifications preferred.
  • Experience with Navy CS/C4I ship integration preferred.
  • Strong Project Management/Engineering skills required.
  • Must have the flexibility to work in a fast paced environment under the pressure of changing and often conflicting priorities.
  • Ability to multi-task and manage simultaneous projects required.
  • Strong research skills and attention to detail required.
  • Self-motivation, strong work ethic and ability to work independently required.
  • Ability to work effectively in a team environment with varying personalities required.
  • Competence in MS Office products and general PC skills required.
  • Strong oral and written communication skills required.

  • Electrical Engineer I

    2 weeks ago

    Brunswick, United States General Dynamics Bath Iron Works Full time

    Job DescriptionThe Electrical Engineering team is hiring. The successful candidates will be responsible to complete development, specification, arrangement, manufacturing, installation, testing, and support of Electrical Power, Lighting and Controls systems installed shipboard or in support of shipboard system operation. As part of General Dynamics Marine...

  • Electrical Engineer I

    1 month ago

    Brunswick, United States General Dynamics - Bath Iron Works Full time

    Job DescriptionThe Electrical Engineering team is hiring. The successful candidates will be responsible to complete development, specification, arrangement, manufacturing, installation, testing, and support of Electrical Power, Lighting and Controls systems installed shipboard or in support of shipboard system operation. As part of General Dynamics Marine...

  • Electrical Engineer I

    2 weeks ago

    Brunswick, United States General Dynamics - Bath Iron Works Full time

    Job DescriptionJob DescriptionThe Electrical Engineering team is hiring. The successful candidates will be responsible to complete development, specification, arrangement, manufacturing, installation, testing, and support of Electrical Power, Lighting and Controls systems installed shipboard or in support of shipboard system operation. As part of General...

  • Electrical Engineer I

    3 weeks ago

    Brunswick, United States General Dynamics - Bath Iron Works Full time

    Job DescriptionJob DescriptionThe Electrical Engineering team is hiring. The successful candidates will be responsible to complete development, specification, arrangement, manufacturing, installation, testing, and support of Electrical Power, Lighting and Controls systems installed shipboard or in support of shipboard system operation. As part of General...

  • Electrical Technician I, II, III, Engineering

    1 month ago

    Brunswick, United States General Dynamics - Bath Iron Works Full time

    Job DescriptionThe Life Cycle Engineering Department supports the design, integration, and construction of modernized systems and equipment on in-service Navy surface combatants. This position reports to the DDG 1000 Planning Yard Engineering team, to provide functional Electrical Engineering analysis and Technical Point of Contact (TPOC) support for DDG...

  • Mechanical Engineer I, Life Cycle Engineering

    4 days ago

    Brunswick, United States General Dynamics Bath Iron Works Full time

    Job DescriptionThe Life Cycle Engineering Department supports the design, construction, and testing of in-service Navy DDG 51 and DDG 1000 surface combatants in multiple locations around the world. Our DDG 51 Engineering team is seeking a Mechanical Engineer with HVAC and piping system experience to support the engineering and design of distributed shipboard...

  • Mechanical Engineer I, Life Cycle Engineering

    3 days ago

    Brunswick, United States General Dynamics Bath Iron Works Full time

    Job Description: The Life Cycle Engineering Department supports the design, construction, and testing of in-service Navy DDG 51 and DDG 1000 surface combatants in multiple locations around the world. Our DDG 51 Engineering team is seeking a Mechanical Engineer with HVAC and piping system experience to support the engineering and design of distributed...

  • Configuration and Logistics Data Analyst I, II, III, Engineering

    19 hours ago

    Brunswick, United States General Dynamics Bath Iron Works Full time

    Job Description: The Logistics Data & Systems Configuration Analyst is responsible for evaluating, developing, and maintaining accurate equipment/systems data utilized by numerous engineering, industrial, and Navy disciplines. This data and service is critical for the Navy to meet naval vessel maintenance, modernization, sustainment, and mission readiness...

  • Sales Engineer

    5 days ago

    Brunswick, United States TrellisWare Technologies, Inc Full time

    TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions.At TrellisWare, we connect passion with...

  • Scientist I, MSTG = Manufacturing Science and Technology Group

    1 week ago

    New Brunswick, United States Kaztronix Full time

    Scientist I, MSTG = Manufacturing Science and Technology Group Job Summary Scientist I performs process development studies, Exhibit batch and process qualification activities. This position also prepares technical documentation to support development and validation program at Pharma company. This position provides technical support to Manufacturing and...

  • Cabinet Maker I

    5 days ago

    Brunswick, United States Strom Aviation Full time

    Job Duties Under direct supervision, learns and performs the basic skills and functions related to fabrication of aircraft cabinets and other wood-surfaced subassemblies using design and engineering drawings. .  Principal Duties and Responsibilities: Essential Functions: Learns entry-level technical skills and knowledge, regulatory...

  • Cabinet Maker I

    3 days ago

    Brunswick, United States The Structures Company Full time

    Job DescriptionJob DescriptionEducation/Experience:High School Diploma or GED required.Wood working, wood finishing or auto body & painting experience in a technical environment or completion of Technical Certificate in cabinet making preferred and/or completion in current year youth apprenticeship program, in area of expertise.Position Purpose:Under direct...

  • Electrical/ Instrument Controls Designer

    5 days ago

    New Brunswick, United States Synerfac Full time

    Work for a manufacturer in Middlesex County as an Electrical Controls Designer: Primary Responsibilities: - Development of instrument control panel layouts, wiring drawings and component selection for control and power. - Creating a bill of material and instrument list based on P&ID"s. - Assist in the design of PLC systems and parts selection. - Development...

  • Scientist I

    4 weeks ago

    New Brunswick, United States ProStaff Workforce Solutions Full time

    Direct Hire Job Summary Scientist performs process development studies and process validation activities. This position also prepares technical documentation to support development and validation program. This position provides technical support to Manufacturing and Quality department. ResponsibilitiesDesign and execution of DOE’s, process optimization...

  • Scientist I

    2 weeks ago

    New Brunswick, United States ProStaff Workforce Solutions Full time

    Direct Hire Job Summary Scientist performs process development studies and process validation activities. This position also prepares technical documentation to support development and validation program. This position provides technical support to Manufacturing and Quality department. ResponsibilitiesDesign and execution of DOE’s, process optimization...

  • Scientist I

    4 weeks ago

    New Brunswick, United States ProStaff Workforce Solutions Full time

    Direct Hire Job Summary Scientist performs process development studies and process validation activities. This position also prepares technical documentation to support development and validation program. This position provides technical support to Manufacturing and Quality department. ResponsibilitiesDesign and execution of DOE’s, process optimization...

  • Automation Mechanical Technician

    3 days ago

    Brunswick, United States L.L.Bean Full time

    We invite you to be part of our team of trailblazers dedicated to helping people discover and enjoy the outside. Come join us. Because on the inside we’re all outsiders. And if it’s outside, we’re all in.L.L.Bean is currently searching for a 3rd shift Automation Mechanical Technician to join the Maintenance Team located in Freeport, Maine.The 3rd shift...

  • Automation Mechanical Technician

    2 days ago

    Brunswick, United States L.L.Bean Full time

    Job DescriptionWe invite you to be part of our team of trailblazers dedicated to helping people discover and enjoy the outside. Come join us. Because on the inside we’re all outsiders. And if it’s outside, we’re all in.Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below.L.L.Bean is...

  • Automation Mechanical Technician

    2 days ago

    Brunswick, United States L.L.Bean Full time

    Job DescriptionWe invite you to be part of our team of trailblazers dedicated to helping people discover and enjoy the outside. Come join us. Because on the inside we’re all outsiders. And if it’s outside, we’re all in.L.L.Bean is currently searching for a 3rd shift Automation Mechanical Technician to join the Maintenance Team located in Freeport,...

  • Administrative Assistant I

    3 days ago

    Township of South Brunswick, United States Supply Chain Full time

    About Williams Sonoma - South Brunswick, NJ Since it was founded in 1956, Williams - Sonoma has grown from Chuck Williams’ single store in Sonoma, CA into one of the largest retailers in the country, with some best known and most beloved brands in home furnishings, including Williams – Sonoma. Pottery Barn and West Elm. Our Distribution Centers serve as...