Quality Control Inspector
4 weeks ago
The Quality Control Inspector is responsible for monitoring our product quality according to our tolerances, specification, and requirements. The position responsibilities consist of using inspections tools and equipment to audit the products being produced or assembled. Inspection data is recoded using our Statistical Process Control system.
PRIMARY RESPONSIBILITIES
•Follow all safety and HESS policies.
•Must be able to read and follow written and verbal instructions.
•Must have working knowledge and basic data entry skills.
•Must be able to use basic mathematical calculations, add, subtract, multiply and divide.
•Will be expected to audit and monitor product quality for multiply machines.
•Maintain daily written and or SPC digital logs.
•Accurately identify material and or product.
•Use inspection tools to perform product and tooling measurements.
•Turn off machines as needed that do not meet quality requirements.
•Communicate with shift supervisor on nonconformance issues and general discussion.
•Using the 5S Principals, must maintain a clean and organized area.
QUALIFICATIONS AND EXPERIENCE
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
•High School diploma or General Education Diploma (GED) preferred.
•Ability to accurately read and interpret documents such as safety rules, prints, operating and maintenance instructions and procedure manuals.
OTHER SKILLS AND ABILITIES
•Lean Training
•Yellow Belt
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
•Must be able to lift 25 pounds from floor level to chest height.
•Must be able to stand for 3-hour duration.
•Must be able to kneel, stoop, and bend continuously through a 3-hour duration.
•Must be able to reach out and over equipment for short periods of time.
•Must be able to lift hands above shoulder height multiple times throughout the 10-hour shift.
•Must be able to push and spread material at waist height multiple times throughout the 10-hour shift.
WORK ENVIROMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The work is primarily performed in a typical production environment. Wear safety attire or protective gear, may be exposed to distracting noise levels, may work within a few feet of other workers. For the most part ambient room temperatures and lighting as found in a typical office environment.
Join our team.
•Enjoy a 4-day work week. (10-hour shifts)
•Medical, Dental, Vision, HSA, FSA,
•Benefits start on the 1st of the month following the date of hire.
•401K eligible 1st of the month following 30 days of employment (employer 6% match)
•Generous PTO and Holiday pay plus sick time.
•Paid Christmas shut down.
•Company paid Life Insurance.
•Tuition Reimbursement + more
Skills & Requirements Qualifications
-
Quality Control Inspector
3 weeks ago
Mesa, United States Foresight Technologies Full timeJob DescriptionJob DescriptionDescription:Foresight Technologies is looking to hire a Quality Control Inspector. A Quality inspector will be responsible for conducting quality inspections on incoming, in-process and final production. Along with Finished products to ensure compliance of specifications and standards., check equipment for proper orientation,...
-
Quality Control Inspector
4 weeks ago
Mesa, United States Capstone Precision Group LLC Full timeJOB SUMMARYThe Quality Control Inspector is responsible for monitoring our product quality according to our tolerances, specification, and requirements. The position responsibilities consist of using inspections tools and equipment to audit the products being produced or assembled. Inspection data is recoded using our Statistical Process Control system....
-
Quality Control Inspector
4 weeks ago
Mesa, United States Capstone Precision Group LLC Full timeJOB SUMMARY The Quality Control Inspector is responsible for monitoring our product quality according to our tolerances, specification, and requirements. The position responsibilities consist of using inspections tools and equipment to audit the products being produced or assembled. Inspection data is recoded using our Statistical Process Control system. ...
-
Quality Control Inspector
3 weeks ago
Mesa, United States Capstone Precision Group LLC Full timeJob Title: Product Inspector Division: Capstone Precision Group Location: Mesa, AZ Reports to, solid line: Department Manager Reports to, dotted line: Department LeadJob Overview: The Product Inspector is responsible for conducting and handling inspections, both visual and manual, of our products to ensure they meet our quality standards. This role also...
-
Quality Control Supervisor
4 weeks ago
Mesa, Arizona, United States Amphenol Aerospace Full timeJob SummaryAmphenol Aerospace Operations is seeking a Quality Control Supervisor to oversee the quality of our products and ensure they meet customer requirements. The successful candidate will supervise a team of inspectors, conduct quality audits, and implement process improvements.Key ResponsibilitiesSupervise a team of inspectors and ensure they are...
-
Quality Control Inspector
4 weeks ago
Mesa, United States Capstone Precision Group LLC Full timeJob Title: Product Inspector Division: Capstone Precision Group Location: Mesa, AZ Reports to, solid line: Department Manager Reports to, dotted line: Department Lead Job Overview: The Product Inspector is responsible for conducting and handling inspections, both visual and manual, of our products to ensure they meet our quality standards. This role also...
-
Quality Control Material Coordinator
4 weeks ago
Mesa, Arizona, United States Amphenol Aerospace Full timeAmphenol Aerospace Operations is seeking a Quality Control Supervisor to oversee the inspection process at its state-of-the-art facility in Mesa, AZ.The successful candidate will supervise employees and workload for Final, Receiving and Gage Lab Inspection, reporting throughput and improving overall departmental procedures in support of Inspection and...
-
Airworthiness Inspector
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Job DescriptionAt Gulfstream Aerospace Corporation, we are seeking a highly skilled Airworthiness Inspector to join our team. As an Airworthiness Inspector, you will be responsible for ensuring that all aircraft components and repairs meet the highest standards of quality and safety.Key Responsibilities:Conduct thorough inspections of...
-
Airworthiness Inspector Sr A&P
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Sr A&P Job SummaryGulfstream Aerospace Corporation is seeking a highly skilled Airworthiness Inspector Sr A&P to join our team in GAC Mesa. As a key member of our quality control team, you will be responsible for ensuring that all aircraft components meet the highest standards of quality and airworthiness.Key Responsibilities:Conduct...
-
Airworthiness Inspector Sr A&P
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Sr A&P Job DescriptionJob Summary:The Senior Airworthiness Inspector is responsible for ensuring the quality and airworthiness of aircraft and components in the Repair Station. This includes conducting inspections, reviewing documentation, and mentoring technicians.Key Responsibilities:Conduct quality control inspections on aircraft...
-
Airworthiness Inspector Lead
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Lead Job DescriptionAbout the RoleGulfstream Aerospace Corporation is seeking a highly skilled Airworthiness Inspector Lead to join our team in GAC Mesa. As a key member of our Quality Control Department, you will be responsible for ensuring that our aircraft meet the highest standards of quality and airworthiness.Key...
-
Airworthiness Inspector Lead
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Lead Job DescriptionAbout the Role:Gulfstream Aerospace Corporation is seeking a highly skilled Airworthiness Inspector Lead to join our team in GAC Mesa. As a key member of our Quality Control Department, you will be responsible for ensuring that our aircraft meet the highest standards of quality and airworthiness.Key...
-
Airworthiness Inspector
2 months ago
Mesa, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector in GAC Mesa Unique Skills: This position is for second shift. Advanced knowledge of Gulfstream Processes and Procedures. Education and Experience Requirements High School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. ...
-
Airworthiness Inspector Lead
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Lead Job DescriptionAbout the RoleGulfstream Aerospace Corporation is seeking a highly skilled Airworthiness Inspector Lead to join our team in GAC Mesa. As a key member of our Quality Control Department, you will be responsible for ensuring the airworthiness of our aircraft and components.Key ResponsibilitiesPlan, schedule, and...
-
Aircraft Quality Assurance Specialist
4 weeks ago
Mesa, Arizona, United States LAUNCH Technical Workforce Solutions Full timePOSITION SUMMARYAircraft Quality Assurance Specialist ensures the airworthiness of aircraft, systems, equipment, and parts by performing inspections and verifying compliance with specifications and government regulations. This role involves preflight and post-flight inspections, ensuring accurate completion of inspection forms. The specialist works from...
-
Airworthiness Inspector Lead
2 months ago
Mesa, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Lead in GAC Mesa Unique Skills: Excellent communication skills and advanced knowledge of Gulfstream Applications. Thorough knowledge of Tiltle 14 eCFR parts 21, 25, 43, 91, 135, and 145. Education and Experience Requirements High School Diploma or GED required. Other Technical School or college preferred....
-
Airworthiness Inspector Sr A&P
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Sr A&P Job DescriptionJob Summary:The Senior Airworthiness Inspector is responsible for ensuring the quality and airworthiness of aircraft and components in the Repair Station. This role involves conducting inspections, reviewing documentation, and mentoring technicians to maintain high standards of quality.Key...
-
Airworthiness Inspector Sr A&P
4 weeks ago
Mesa, Arizona, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector Sr A&P Job SummaryThe Senior Airworthiness Inspector is responsible for ensuring that aircraft, aircraft components, and related paperwork meet acceptable standards of quality. This includes physically inspecting aircraft, reviewing documentation, and coordinating with technicians to ensure accurate records are produced in a timely...
-
Airworthiness Inspector A&P
2 weeks ago
Mesa, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector A&P in GAC MesaUnique Skills:A&P required and knowledge of eCFR parts 91, 135, and 145. Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation...
-
Airworthiness Inspector A&P
1 week ago
Mesa, United States Gulfstream Aerospace Corporation Full timeAirworthiness Inspector A&P in GAC MesaUnique Skills:A&P required and knowledge of eCFR parts 91, 135, and 145. Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation...