1st Shift VTL Machinist
2 weeks ago
- Set up and operate CNC Lathe machines (Vertical).
- Verify tool lengths (including: setting of tool geometries and offsets).
- Set up and change fixtures, clamp fixtures and clamps as required.
- Load and unload fixtures using overhead cranes, slings, chains etc.
- Adjustment of offsets.
- Produce conforming first piece products to process drawing and quality specifications.
- Achieve specified quality standards.
- Hold tight tolerances on large 28"+ parts
- Proficiently use a variety of manual gauges which includes but not limited to swing gauges, callipers and OD mics.
- Conform to specified health and safety standards.
- Report any issues or problems to Supervision immediately.
- Work within the designated workgroup to plan, prioritize and perform work to satisfy customer and company needs
- Carry out daily TPM activities as required
- Provide guidance and assistance to other team members as needed
- Execute a 'Zero Defects' & 'Right First time' culture.
- Propose Operational Excellence & Continuous Improvements to management.
- Provide Root Cause & Corrective Action (RCCA) support.
- Ensure parts are handled and protected in a suitable manner to prevent damage during operations and movement.
- Comply with any other guidelines as defined in the Employee Handbook.
- Comply with company housekeeping standards.
- Adhere to company EH & S Policies.
- To perform other such duties as generally correspond to the nature of the position and its level of responsibility.
- High School Diploma or GED
- 5 + years of CNC experience, 2+ years in Lathe/VTL experience preferred.
- Knowledge in Fanuc and OSP controls
All offers are contingent on a successful completion of a
- A background check with results acceptable to the Company. An authorization and relevant forms will be forthcoming
- A post-offer drug screen with a negative result
- A post-offer physical assessment
AeroCision is an Equal Opportunity Employer including Veterans and Individuals with Disabilities and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process. We only accept applications or resumes for current open positions. If you have any difficulty using our online system and you need an accommodation due to a disability, you may contact Taylor Rose in the Human Resources Department at trose@aerocision.com to contact us about your interest in employment. This option is reserved for individuals who are unable to use or require assistance as the result of a disability and is not intended for other purposes.
-
1st Shift CNC Machinist/Programmer
2 months ago
Chester, United States New Life Staffing, LLC Full timeJob DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...
-
1st Shift CNC Machinist/Programmer
2 months ago
Chester, United States New Life Staffing, LLC Full timeNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 1st shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting up and running conventional...
-
CNC Lathe Machinist
1 month ago
Chester, United States International Staff Consulting Full timePosition: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Lathe Machinist
3 weeks ago
Chester, United States Gables Search Group Full timePosition: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Lathe Machinist
2 weeks ago
Chester, United States Gables Search Group Full timePosition: CNC Lathe Machinist (2nd Shift) Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: Manufacturing Our Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision. Job...
-
CNC Milling Machinist
6 days ago
Chester, United States International Staff Consulting Full timePosition: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Milling Machinist
6 days ago
Chester, United States Gables Search Group Full timePosition: CNC Milling Machinist Shift: 1st | Hours: 8 AM - 4PM Type: Full-Time | Mode: Direct Placement Pay Scale: $23 - 28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Milling Machinist 2nd Shift
5 days ago
Chester, United States International Staff Consulting Full timePosition: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Milling Machinist 2nd Shift
6 days ago
Chester, United States Gables Search Group Full timePosition: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.Job...
-
CNC Milling Machinist 2nd Shift
7 days ago
Chester, United States Gables Search Group Full timePosition: CNC Milling Machinist (2nd Shift) Shift: 2nd | Hours: 3:30 pm - 11pm Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: Manufacturing Our Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision. Job...
-
1 Shift Manual Machinist
1 month ago
Chester, United States Aerocision Full time4 Day Work WeekSet up and operate CNC Lathe machines (Horizontal and/or Vertical).Verify tool lengths (including: setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.Load and unload fixtures using overhead cranes, slings, chains etc.Adjustment of offsets.Produce conforming first piece products to process...
-
1 Shift Manual Machinist
2 weeks ago
Chester, United States Aerocision Full time4 Day Work WeekSet up and operate CNC Lathe machines (Horizontal and/or Vertical). Verify tool lengths (including: setting of tool geometries and offsets). Set up and change fixtures, clamp fixtures and clamps as required. Load and unload fixtures using overhead cranes, slings, chains etc. Adjustment of offsets. Produce conforming first piece products to...
-
2nd Shift CNC Machinist/Programmer
1 month ago
Chester, United States New Life Staffing LLC Full timeJob DescriptionJob DescriptionDescription:New Life Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible...
-
2nd Shift CNC Machinist/Programmer
1 day ago
Chester, United States New Life Staffing, LLC Full timeJob DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...
-
2nd Shift CNC Machinist/Programmer
2 weeks ago
Chester, United States New Life Staffing, LLC Full timeJob DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...
-
2nd Shift CNC Machinist/Programmer
2 weeks ago
Chester, United States New Life Staffing, LLC Full timeJob DescriptionJob DescriptionNewlife Staffing is currently seeking a skilled and experienced CNC Machinist/Programmer for our 2nd shift. As a CNC Machinist/Programmer, you will play a crucial role in our manufacturing operations by programming, setting up, and operating Fadal and HAAS CNC Machining Centers. Additionally, you will be responsible for setting...
-
Machinist
3 weeks ago
Chester, United States Marmon Holdings, Inc. Full timeHohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...
-
Machinist
3 weeks ago
Chester, United States Marmon Holdings, Inc. Full timeHohmann & Barnard IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.This position requires the use of metal working...
-
Machinist
3 weeks ago
Chester, United States Marmon Holdings, Inc. Full timeHohmann & Barnard Inc Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. This position requires the use of metal working...
-
Machinist
2 weeks ago
Chester, United States Marmon Holdings, Inc. Full timeHohmann & Barnard Inc Come join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent. This position requires the use of metal working...