Assembler

4 weeks ago

Kalamazoo, United States Dimplex Thermal Solutions Full time

**Job Overview**

Assembles heat exchanger packages and chillers. Checks and confirms work in accordance with job specifications, procedures, quality standards and checklists. Works as part of a team.

**Responsibilities**

Include but are not limited to:

- Read and interpret bills of materials (BOM) and blueprints
- Check the parts against the bill of material to confirm that all parts are received and correct; check serial numbers, voltage, phase, etc.
- Understand the layout of units assembled
- Assemble units:

- Mount compressor, condenser, and other components
- Cut, bend and braze specified tubing to inlets and outlets of components, using proper brazing techniques (nitrogen purging, wet rags, etc.) and following standard DTS procedures
- Assemble plumbing fittings and thread pipes
- Cut and Install insulation as specified in BOM
- Assemble sheet metal cabinets
- Confirm quality
- Check dimensions of the unit against the prints, i.e. height and width, inlet and outlet, feet, etc.
- Leak check lines and component connections for leaks
- Observe all company rules and policies, i.e. safety, 5S, attendance
- Participate and work in a team atmosphere
- Maintain high productivity and quality workmanship
- Suggest design and procedure improvements that improve quality, productivity, and reduce cost
- May be asked to serve on various committees
- Responsible for keeping work area(s) clean and free of clutter during work time and at the end of shift 5S time
- Participate in department meetings
- Other duties and responsibilities as assigned

**Requirements**:

- Ability to read, write and do simple math
- Good mechanical ability
- Ability to accurately read tape measure
- Ability to read and interpret blueprints and bills of material
- Ability to braze / silver solder copper and stainless-steel piping to DTS standards
- Ability to bend and form copper tubing to DTS standards
- Ability to safely and properly use a wide variety of shop tools, including hand and power tools.
- Ability to safely and properly operate a forklift and/or other lift equipment.
- Must have high school diploma with some post high school vocational training or a combination of experience and training sufficient to perform the job duties
- Ability to work cooperatively with others in a team environment
- Ability to follow directions in standard practices and procedures

**Physical Requirements**

Physical and visual acuity at a level to effectively perform duties. Be able to stand for long periods of time, sit, bend, squat and kneel. Be able to push or pull at least 50 pounds and be able to safely lift at least 40 pounds. Be able to reach and work over head.

**Work Environment**

Skilled manufacturing shop; exposure to moderate amount of dust, dirt and noise; ambient air temperature fluctuates seasonally.

  • Assembler

    2 months ago

    Kalamazoo, United States Employbridge Full time

    Job DescriptionJob DescriptionWe are seeking an Assembler to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency.2nd Shift: 5pm-3:30am Monday-Thursday4 Day Work Week!!!*Resume/Interview is required.  Must have stable job history with longevity and experience in...

  • Assembler

    3 days ago

    Kalamazoo, United States Sterling Industries Full time

    **About the Company** Based in Woodbridge, Ontario, Sterling Industries is a fast-growing North American based contract manufacturer and assembler of medical devices and sub-components. We help clients deliver successful products by providing scaled production, design-for-manufacturing expertise, supplier consolidation and other critical value chain...

  • Fabrication Assembler

    3 weeks ago

    Kalamazoo, United States AtWork - Kalamazoo Full time

    Job Description: We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers. Hybrid 2nd and...

  • Fabrication Assembler

    2 weeks ago

    Kalamazoo, United States AtWork - Kalamazoo Full time

    Job Description: We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers. Hybrid 2nd and...

  • Fabrication Assembler

    3 weeks ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Fabrication Assembler

    1 week ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Fabrication Assembler

    3 weeks ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Fabrication Assembler

    3 weeks ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Fabrication Assembler

    3 weeks ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Fabrication Assembler

    1 week ago

    Kalamazoo, United States AtWork Group Full time

    Job Description:We are seeking a detail-oriented Fabrication Assembler to join our manufacturing team. The successful candidate will be responsible for assembling fabricated parts, ensuring precision and quality in each step of the process. This role is vital to maintaining our high standards and delivering superior products to our customers.Hybrid 2nd and...

  • Assembler

    2 weeks ago

    Kalamazoo, United States POLYTEK DEVELOPMENT CORP Full time

    Job DescriptionJob DescriptionDescription:Polytek® Development Corp. is a leading manufacturer of mold making and casting materials. Polytek® is currently looking for a highly motivated, experienced, and extremely organized individual to join our rapidly expanding company.Essential Job Functions:Major tasks and other key responsibilities include:Accurately...

  • Gaspac Assembly/Test

    4 days ago

    Kalamazoo, United States Flowserve Corporation Full time

    Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...

  • Sub Assembly

    2 weeks ago

    Kalamazoo, United States Talent Strategy Full time

    Job DescriptionJob Description*$250.00 sign on bonus, after 90 daysSub Assembly1st shift - 6:00 am-2:30 pmPay - $16.00 per hourAssembly of Make Up Air equipment. Check and confirm work in accordance with job specifications, procedures, quality standards and checklists. Work both as part of a team and independently.DUTIES & RESPONSIBILITIES* Read and...

  • Sub Assembly

    2 weeks ago

    Kalamazoo, United States Talent Strategy Full time

    Job DescriptionJob Description*$250.00 sign on bonus, after 90 daysSub Assembly1st shift - 6:00 am-2:30 pmPay - $16.00 per hourAssembly of Make Up Air equipment. Check and confirm work in accordance with job specifications, procedures, quality standards and checklists. Work both as part of a team and independently.DUTIES & RESPONSIBILITIES* Read and...

  • Gaspac Assembly/Test

    5 days ago

    Kalamazoo, United States Flowserve Corporation Full time

    Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...

  • Gaspac Assembly/Test

    10 hours ago

    Kalamazoo, United States Flowserve Corporation Full time

    Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...

  • Gaspac Assembly/Test

    4 days ago

    Kalamazoo, United States Flowserve Corporation Full time

    Job DescriptionFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges...

  • 2nd Shift Assembly

    2 weeks ago

    Kalamazoo, United States Dimplex Thermal Solutions Full time

    **Job Overview** Assembles heat exchanger packages and chillers. Checks and confirms work in accordance with job specifications, procedures, quality standards and checklists. Works as part of a team. **Responsibilities** Include but are not limited to: - Read and interpret bills of materials (BOM) and blueprints - Check the parts against the bill of...

  • Night Shift Assembler

    2 weeks ago

    Kalamazoo, United States HR Collaboration Group LLC Full time

    Night Shift Assembler This role is located in** Kalamazoo, Michigan. Want to continue to grow and enhance your career within a locally owned company? Do you strive to achieve high performance and enjoy making an impact on the community where integrity and excellence is valued and where you can take your career to the next level? - Then, we have a place for...

  • Night Shift Assembler

    1 week ago

    Kalamazoo, United States HR Collaboration Group LLC Full time

    Night Shift AssemblerThis role is located in Kalamazoo, Michigan. Want to continue to grow and enhance your career within a locally owned company? Do you strive to achieve high performance and enjoy making an impact on the community where integrity and excellence is valued and where you can take your career to the next level?Then, we have a place for you!...