Assembler

2 weeks ago

Sparks, United States Katalyst Healthcares & Life Sciences Full time

**ob Overview**

Performs a wide variety of assigned tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, and fitting on assembly units. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Conducts quality inspections on processing line in accordance with quality specifications. Disassembles, modifies, reworks, reassembles, and tests experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. Makes setups and adjustments holding tolerances to blueprint specifications. Identifies, troubleshoots, and resolves complex issues associated with instrument assembly operations.

**Responsibilities and Duties**
- Able to build, integrate, and understand the entire assembly process and requirements for any instrument in the production area
- Responsible for assembling multiple product lines including integration of sub
- assemblies into the instrument
- Provide overall device history record recording, reporting (serial numbers, tools)
- Provide basic component testing (pre-assemblies, modules of simple instruments) Identify defects, recommend design and process improvements
- Provide Expertise in reading / understanding drawings, work instructions, and overall workmanship standards
- Provide training to associates as needed including broad variety of mechanical and basic testing activities
- Execute on basic test instructions as needed including analyzing results and data to determine pass / fail and/or next steps.
- Conduct routine / moderately complex troubleshooting and repair work
- Complete any related production activities in compliance with relevant regulatory requirements and in accordance with BD's expectations for Safety and Quality
- Work or interface with Manufacturing Engineering, Quality, Planning and Purchasing as needed
- Complete work activity in the accordance to BD's defined specifications, operating procedures, and company policies.
- Must be able to perform standard material handling functions for instrument raw materials and sub-assemblies.
- Maintain a safe, clean, and efficient work environment through execution of all housekeeping responsibilities including cleaning, sweeping, organizing to maintain a
- safe and clean work environment
- Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP)
- Must follow all BD housekeeping policies and procedures
- Must follow all BD safety policies and procedures
- Must be able to work overtime as required to meet BD business requirements
- Performs other duties as required.

**Qualifications**

**Minimum Education/Experience**:

- High school degree or GED required with 4 years manufacturing experience or an AA technical degree with 1 year experience.
- Experience in a regulated environment required.

**Basic Skills**:

- Proven leadership skills capability and ability to mentor, coach, and develop other associates
- Proven ability and accountability to results and to improve performance and processes across a team, work cell, or project.
- Must demonstrate a strong ability and commitment to Continuous Improvement.
- Including ability to initiate, implement, and ongoing support all aspects of Continuous Improvement (Lean Manufacturing) philosophies through active participation in Blitzes, Shift -start up meetings, Kaizen Action Sheets, Safety, and other CI projects and initiatives.
- Strong knowledge of mechanical tools including torque drivers, gauges, bits, etc.
- Highly proficient at reading drawings, interpreting and measuring dimensions, requirements, etc.
- Must demonstrate the ability to manage time across multiple production orders and processes within allotted time standards.
- Must demonstrate the ability to work effectively in a team setting to reach common goals.
- Must demonstrate the ability to understand and work within specified Quality procedures.
- Must demonstrate the understanding and support of Continuous Improvement (Lean Manufacturing) philosophies through active participation in Blitzes, Shift -start up
- meetings, Kaizen Action Sheets and other CI projects and initiatives.
- Proven ability to complete tasks in support of achieving goals and improved performance
- Must be able to effectively manage frequent assignment changes

**Proficient/Working Skills: (i.e. Forklift Certification, computer skills, problem solving skills)**
- Must be proficient in English with the ability to read, write, analyze/evaluate charts, follow simple diagrams and perform basic arithmetic
- Basic proficiency with PCs (Personal Computers) and basic use of a Windows environment is required
- Use independent judgment

  • Assembler

    6 days ago

    Sparks, United States Ellsworth Full time

    What does a cell phone in your pocket, a spaceship, and an electric vehicle have in common? Ellsworth Adhesives specs in materials in each of those products! Ellsworth Dispensing Solutions provides the solutions to make parts. We are the knowledge leader in dispensing solutions. Ellsworth Corporation, a global, industry leading distributor of specialty...

  • Assembler 300

    6 days ago

    Sparks, United States Path Engineering Full time

    Role As a Production Assembler 300 (also known as Manufacturing Assembler, Assembly Technician), you'll be responsible for product assembly, quality assurance, and mentoring less experienced team members. You'll interpret operation sheets, adhere to International Organization for Standardization (ISO) procedures, and complete necessary documentation. You'll...

  • Assembler 300

    3 weeks ago

    Sparks, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Production Assembler 300 (also known as Manufacturing Assembler, Assembly Technician), you'll be responsible for product assembly, quality assurance, and mentoring less experienced team members. You'll interpret operation sheets, adhere to International Organization for Standardization (ISO) procedures, and...

  • Assembler 300

    2 days ago

    Sparks, United States Path Engineering Full time

    Role As a Production Assembler (also known as Manufacturing Technician, Assembly Operator), you'll be responsible for product assembly, quality assurance, and mentoring less experienced team members. You'll interpret operation sheets, adhere to International Organization for Standardization (ISO) procedures, and complete necessary documentation. You'll also...

  • Assembler II

    1 week ago

    Sparks, United States B & J Industries LLC Full time

    Job DescriptionJob DescriptionJOB TITLE: ASSEMBLER II PRIMARY RESPONSIBILITY: Provide production support to Assembly Department, producing parts according to customer specifications and the internal procedures of B & J Industries, with an emphasis on internal and external customer service. Successful operators will place high emphasis on internal and...

  • Instrument Assembler

    2 weeks ago

    Sparks Glencoe, United States MILLENNIUMSOFT Full time

    Position :Instrument Assembler Location : Sparks, MD Duration : 12 Months Contract Total Hours/week :40.00 1st Shift Description: Performs any combination of tasks involved in the fabrication, manufacture, assembly, testing and packaging of medical devices as well as setting up, operating, performing maintenance on and troubleshooting equipment....

  • Instrument Assembler 3

    3 weeks ago

    Sparks Glencoe, United States Compunnel Full time

    Job Overview: Performs a wide variety of assigned tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Determines and/or follows methods and sequence of operations in performing wiring, component installation,...

  • Instrument Assembler 3

    2 weeks ago

    Sparks Glencoe, United States JobRialto Full time

    Job Overview: Performs a wide variety of assigned tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Determines and/or follows methods and sequence of operations in performing wiring, component installation,...

  • Manufacturing Engineer

    7 days ago

    Sparks, United States latitude Full time

    Client Opportunities – Mechanical Engineering Openings / Serve as “hands-on” Manufacturing Engineer on project team dedicated to assembly of lithium ion and lithium metal batteries Design and implement tools and processes to manufacture new products Identify continuous improvement opportunities and lead changes to improve product quality Identify and...

  • Manufacturing Engineer

    4 weeks ago

    Sparks, United States Associates Systems LLC Full time

    Manufacturing Engineer Evaluates manufacturing processes applying knowledge of process design, fabrication, assembly, tooling, materials, conferring with equipment vendors and liaising between Manufacturing Operators and Engineering staff. The Manufacturing Engineer will develop procedures, methods, and tools for assembly for RF/Microwave products....

  • Experienced A1 Garage Door Service Technician

    1 week ago

    Sparks, United States A1 Garage Door Service, LLC Full time

    (This list may not include all the duties assigned)Assemble mechanical components or machine parts. Adjust equipment to ensure optimal performance. Order replacement springs, sections, or slats. Repair or replace worn or broken door parts using hand Service Technician, Garage Door, Service Tech, Technician, Door, Mechanical, Manufacturing

  • Material Handler, Gigafactory Nevada>

    2 weeks ago

    Sparks, United States Tesla Full time

    Tesla, Inc. - Manufacturing [Warehouse Associate / Package Handler] As a Material Handler at Tesla, Inc., you'll: Locate & acquire parts from the production line; Deliver parts to the production line and prepare shipments for offsite locations; Operate safety-sensitive and heavy equipment such as forklifts, tuggers, pallet jacks, flatbed carts, etc; Fill up...

  • Electrician

    4 weeks ago

    Sparks, United States SATER ELECTRIC LLC Full time

    Job DescriptionJob DescriptionElectricians install, maintain, and repair electrical wiring, equipment, and fixtures for PV systems. They ensure that the work complies with electrical and building codes.  This position would also include connecting solar panels and inverters and other high-voltage equipment to a building’s power supply; repair or replace...

  • Manufacturing Engineer

    6 days ago

    Sparks, United States International Staff Consulting Full time

    Job Title: Manufacturing Engineer Location: Sparks, Nevada Salary: $80-100K plus bonus Job Summary of the Manufacturing Engineer: The Manufacturing Engineer will play a crucial role in the design and development process of mechanical systems and components. The primary responsibilities will be to create accurate and detailed technical drawings, plans, and...

  • Solar Installer

    4 weeks ago

    Sparks, United States SATER ELECTRIC LLC Full time

    Job DescriptionJob DescriptionWe are a local solar installation company currently seeking driven and motivated individuals to join our solar installation team in the Reno/Sparks area. In this position one will install photovoltaic (PV) systems in accordance with codes and standards using drawings, schematics, and instructions . Lay-out, assemble and install...

  • Welder

    3 days ago

    Sparks, United States Jensen Precast Full time

    Job DetailsJob LocationMetalTech - Sparks, NVPosition TypeFull TimeTravel PercentageNoneJob ShiftDayWHAT YOU'LL BE DOINGThe Welder Fabricator is a key position at our Metal Tech facility. Primarily using MIG, TIG and Stick welding, flame-cutting and carbon arc equipment you'll be working in a metal shop, fabricating access doors for Precast...

  • Electrician

    4 weeks ago

    Sparks, United States SATER ELECTRIC LLC Full time

    Job DescriptionJob DescriptionBenefits:401(k)Competitive salaryOpportunity for advancement Electricians install, maintain, and repair electrical wiring, equipment, and fixtures for PV systems. They ensure that the work complies with electrical and building codes. This position would also include connecting solar panels and inverters and other high-voltage...

  • Solar Installer

    1 month ago

    Sparks, United States SATER ELECTRIC LLC Full time

    Job DescriptionJob DescriptionBenefits:401(k)Competitive salaryOpportunity for advancement We are a local solar installation company currently seeking driven and motivated individuals to join our solar installation team in the Reno/Sparks area. In this position one will install photovoltaic (PV) systems in accordance with codes and standards using drawings,...

  • Electrical Control Panel Technician

    2 days ago

    Sparks, United States Liberty Personnel Services Full time

    Electrical Control Panel TechnicianTop notch automation systems integrator seeks experienced Control Panel Technician with ability to build and wire Electrical Control Panels:Point to point wiring of relays, controls, PLCs, I/O Modules, VFDs, interfaces, and instrumentationAutoCAD proficientAble to understand electrical drawingsAble to physically assemble...

  • Machine Operator

    1 month ago

    Sparks, United States MicroMetl Corporation Full time

    Job DescriptionJob DescriptionMicroMetl Corporation is currently the largest independent manufacturer of accessories for commercial heating and cooling equipment. We have been forged with over 50+ years of industry experience and service and continue to grow around the regions, including the mid-west and south-west. We offer competitive total rewards...