Outside Machinist III Subsafe

7 days ago

Portsmouth, United States EPSILON SYSTEMS Full time
Epsilon Systems Mission Readiness Group is currently seeking a full-time SUBSAFE Outside Machinist III in Portsmouth, VA

Summary: Repairs, modifies or overhauls various types of SUBSAFE equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.

Responsibilities:
  • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
  • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
  • Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
  • Strictly adheres to safety, quality standards.
  • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
  • Insures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.
  • Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
  • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
  • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
  • Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
  • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
  • Performs and/or verifies mechanical alignments.
  • Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
  • Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
  • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
  • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
  • Assists in rigging when necessary.
  • Ability to work outside of trade.

Requirements:
  • High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard
  • 5 years' experience and SUBSAFE experience.
  • Has knowledge of the trade qualifications and performs as a level III Outside Machinist.
  • Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
  • Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).
  • Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.
  • Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.
  • Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
  • Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.
  • Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.
  • Assists in rigging evolutions when necessary.
  • Communicates effectively
  • Works independently or in a group. Requires no supervision/oversight.
  • Ability to do basic math, i.e. add, subtract, divide and multiply.
  • Ability to read, write, speak, and comprehend English.
  • Ability to obtain and maintain National Security Clearance Level Secret.
  • Ability to obtain access to military and government installations and private shipyards worldwide.
  • Ability to travel.

Preferred Qualifications
  • Current security clearance

ADA Notations :
  • Requires walking, reaching, sitting and concentration in the presence of occasional noise.
  • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
  • Able to lift, carry and move objects up to 50 lbs in weight.
  • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
  • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Able to perceive and distinguish normal range of colors.
  • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.


Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.

  • Outside Machinist III Subsafe

    4 weeks ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Mission Readiness Group is currently seeking a full-time SUBSAFE Outside Machinist III in Portsmouth, VASummary: Repairs, modifies or overhauls various types of SUBSAFE equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.Responsibilities: Reports directly to the Production Manager. Once...

  • Outside Machinist Specialist Subsafe

    4 weeks ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Mission Readiness Group is currently seeking a SUBSAFE Outside Machinist Specialist in Portsmouth, VA.Summary: Repairs, modifies or overhauls various types of SUBSAFE equipment or systems. Sets up and operates portable machining tools or equipment.Responsibilities: Reports directly to the Production Manager. Once assigned, reports directly to...

  • Outside Machinist Specialist Subsafe

    7 days ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Mission Readiness Group is currently seeking a SUBSAFE Outside Machinist Specialist in Portsmouth, VA.Summary: Repairs, modifies or overhauls various types of SUBSAFE equipment or systems. Sets up and operates portable machining tools or equipment.Responsibilities: Reports directly to the Production Manager. Once assigned, reports directly to...

  • Outside Machinist Specialist Subsafe

    4 weeks ago

    Portsmouth, United States Epsilon Systems Full time

    Epsilon Systems Mission Readiness Group is currently seeking a SUBSAFE Outside Machinist Specialist in Portsmouth, VA. Summary: Repairs, modifies or overhauls various types of SUBSAFE equipment or systems. Sets up and operates portable machining tools or equipment. Responsibilities: Reports directly to the Production Manager. Once assigned, reports directly...

  • Outside Machinist

    1 month ago

    Portsmouth, United States Shipyard Staffing LLC Full time $25

    Shipyard Staffing is currently hiring for Outside Machinist with an ACTIVE SECRET CLEARANCE for work at Norfolk Naval Shipyard in Portsmouth, VA.Must have a fully adjudicated Secret ClearanceMust be a U.S. CitizenMust be able to obtain a RED NAVSEA badgeMust be able to obtain DBIDSJob Description:The Outside Marine Machinist contractor employee shall be able...

  • Outside Machinist

    3 weeks ago

    Portsmouth, United States Aerotek Full time

    **Job Title: 1st Class Outside Machinist****Job Description**Seeking skilled Outside Machinists with extensive repair yard experience. The role involves working in various locations including NOB, Little Creek, and CG base in Portsmouth. Candidates must have a DBIDS in hand and over 6 years of experience in similar roles. The position will also support...

  • Outside Machinist

    2 months ago

    Portsmouth, United States International Marine and Industrial Applicators Full time

    Description JOB TITLE: OUTSIDE MACHINIST REPORTS TO: STRUCTURAL SUPERINDENDENT SUMMARY Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed...

  • NDT Level III Examiner

    5 days ago

    Portsmouth, United States Thrive Recruiting Partners Full time

    A leading Defense and Space Manufacturing company is seeking an NDT Level III Examiner to join their team in Portsmouth, Virginia. In this role you will prepare Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Additionally, you will administer the Welder, Brazer and NDT training and qualification program and serve as the Subject...

  • NDT Level III Examiner

    16 hours ago

    Portsmouth, United States Thrive Recruiting Partners Full time

    A leading Defense and Space Manufacturing company is seeking an NDT Level III Examiner to join their team in Portsmouth, Virginia. In this role you will prepare Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Additionally, you will administer the Welder, Brazer and NDT training and qualification program and serve as the Subject...

  • NDT Level III Examiner

    4 days ago

    Portsmouth, United States Thrive Recruiting Partners Full time

    A leading Defense and Space Manufacturing company is seeking an NDT Level III Examiner to join their team in Portsmouth, Virginia. In this role you will prepare Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Additionally, you will administer the Welder, Brazer and NDT training and qualification program and serve as the Subject...

  • NDT Level III Examiner

    4 days ago

    Portsmouth, United States Thrive Recruiting Partners Full time

    A leading Defense and Space Manufacturing company is seeking an NDT Level III Examiner to join their team in Portsmouth, Virginia. In this role you will prepare Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Additionally, you will administer the Welder, Brazer and NDT training and qualification program and serve as the Subject...

  • Commercial Banking Officer III

    4 weeks ago

    Portsmouth, United States Camden National Full time

    Live here. Play here. Bank here. Work here. If you're looking to build your career at a forward-thinking organization with deep community roots and a vision for growth, success, and giving back, you've come to the right place. The Commercial Banking Office III (CBO III) is responsible for high level commercial business development sales efforts that are...

  • Commercial Banking Officer III

    6 hours ago

    Portsmouth, United States Camden National Bank Defunct Full time

    Live here. Play here. Bank here. Work here. If you're looking to build your career at a forward-thinking organization with deep community roots and a vision for growth, success, and giving back, you've come to the right place. The Commercial Banking Officer III (CBO III) is responsible for high level commercial business development sales efforts that are...

  • Welder III

    4 weeks ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Mission Readiness Group is currently seeking a full-time Welder III in Portsmouth, VA.Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding...

  • Shipyard Trade Workers

    4 weeks ago

    Portsmouth, United States CTR Corporation Full time

    CTR Group is currently seeking Shipyard Trade Workers throughout Hampton Roads, VA: Transitioning or former Navy personnel and current Reservists are strongly encouraged to apply for both cleared and uncleared positions. Shipyard Helpers with D.o.D. Clearances are urged to apply. Per Diem available when qualified. US Citizenship Required Shipyard Trades...

  • Welder III

    2 weeks ago

    Portsmouth, Virginia, United States Epsilon Systems Full time

    Epsilon Systems Mission Readiness Group is currently seeking a full-time Welder III in Portsmouth, VASummary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding...

  • Welder III

    1 week ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Mission Readiness Group is currently seeking a full-time Welder III in Portsmouth, VA.Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding...

  • Welder III

    4 weeks ago

    Portsmouth, United States Epsilon Systems Full time

    Epsilon Systems Mission Readiness Group is currently seeking a full-time Welder III in Portsmouth, VA.Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding...

  • NDT-Level II Technician

    4 weeks ago

    Portsmouth, United States EPSILON SYSTEMS Full time

    Epsilon Systems Solutions, Inc. is currently seeking a full time NDT-Level II Technician in Portmouth, VA. Summary: Directly reports to NDT Level III Examiner. Inspect and monitor work performed on government and commercial work items, specializing in Hull, Mechanical and Piping Inspections for Quality compliance. Review work packages prior to start-work...

  • CNC Machine Operator

    2 weeks ago

    Portsmouth, Virginia, United States Global Technical Talent Full time

    CNC Machine OperatorJob Summary: Our client is looking for CNC Machine Operators to run a variety of CNC equipment in our production shop in Newington, NHJob Duties & Responsibilities:Adhere to the clients attendance policy. Maintain and operate a variety of CNC equipment on the production floor. Make adjustments to ensure parts are meeting quality...