CNC Machine Repair Technician II

4 weeks ago

Durham, United States Amentum Full time

Amentum, is seeking a 1st shift CNC Machine Repair Technician II to join our team at in Durham, NCTypical work hours are 6:30 AM - 3:00 PM; hours may vary based on business demand.
This position is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive maintenance on the facility machine tool equipment in an industrial environment. Responsibilities:
Identifies and corrects any safety-related issues and performs independent equipment evaluations to identify potential equipment failures.
Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures and wearing PPE as required.
Understands company policies and enforces safety regulations.
Performs preventive maintenance on industrial electrical control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS).
Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards.
Recommends measures to improve maintenance methods and equipment performance.
Analyzes and resolves work problems or assists workers in solving work problems.
Maintains, troubleshoots and repairs electrical equipment.
Troubleshooting of basic electrical components.
Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions.
Differentiates between cause types when troubleshooting among product, process, mechanical, and electrical contributors.
Reads and interprets mechanical and electrical schematics/prints.
Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer.
General Maintenance of equipment will also be required.
Other duties as assigned by Manager or Supervisor.

Minimum Requirements:
High school diploma or demonstrated equivalent.
Two years of experience maintaining buildings, facilities, or equipment a large commercial or industrial environment, or demonstrated equivalent combination of education and experience.
Valid driver's license
Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher.
Must be able to pass a pre-employment substance abuse test.
This position does not include sponsorship for United States work authorization, must be authorized to work in the US. Note - U.S Citizenship is required for facility credentials/authorization at this work location
This position will require the ability to obtain a security access badge at our client's location.
This position may require overtime, various shifts, weekends, holidays and alternative work schedules.

Physical Requirements:
Requires the ability to regularly lift up to 50 lbs.
Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.
Requires the flexibility to bend/stoop, squat repetitive during shift.
Requires the ability to regularly kneel repetitive for shift.
Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.
Requires the ability to stretch/reach on a repetitive basis for shift.
Requires the ability to walk extensively throughout the plant during shift.
Requires the use of a Company/Client approved utility knife.
Requires the ability to differentiate colors pertaining to wire color-coding.
Some tasks will require repetitive wrist movement.
Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.

Special Requirements:
Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed.
Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.

Preferred Qualifications:
Associate's degree in industrial electrical or a related field.
Experience working safely with 480V 3 phase circuits.
Experience troubleshooting and repairing industrial lighting systems.
Experience making repairs on rubber production or similar equipment.
Experience installing conduit.
Experience troubleshooting and repairing electric motors and motor controls.
Experience troubleshooting PLC logic.
Experience troubleshooting VFD's.
Experience working with a PC-based work order opening, closing and time reporting system.
Maintains, improves, and participates in developing control systems, programming ladder logic / PLCs (Allen Bradley, Siemens, FANUC, GE, MicroLogix, ControlLogix, and PLC-5) and HMI.
Utilizes the building automation system to track building conditions and the operation of production equipment.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters.

  • CNC Machine Repair Technician III-2nd shift

    4 weeks ago

    Durham, United States Amentum Full time

    Amentum is seeking an CNC Machine Repair Technician at the subject matter expert level to join our Facilities - Operations and Maintenance team based in Durham, NC. This is for our 2nd shift ( Monday-Friday, 2:30 pm to 11:00 p.m. EST)This position will be a part of a technical team of 10 employees supporting technical operations at the client's facility. The...

  • CNC Laser Machine Technician

    1 week ago

    Durham, North Carolina, United States Accentuate Staffing Full time

    Accentuate Staffing is seeking a skilled CNC Laser Operator to work with an established manufacturer in the Durham area. This is a direct hire opportunity with a regular schedule of Monday-Friday, 6am-2:30pm.Key Responsibilities:Set up and operate CNC laser machine tools to produce high-quality precision parts and components.Perform troubleshooting and...

  • Mechanic - Vehicle/Equipment Repair Technician II

    2 weeks ago

    Durham, North Carolina, United States State of North Carolina Full time

    Job Title: Mechanic - Vehicle/Equipment Repair Technician IIJob Summary:We are seeking a skilled Mechanic - Vehicle/Equipment Repair Technician II to join our team at the North Carolina Department of Transportation. As a key member of our maintenance team, you will be responsible for performing routine maintenance and repairs on a variety of vehicles and...

  • Engineering Technician II

    4 weeks ago

    Durham, North Carolina, United States Sierra Space Full time

    About the RoleWe are seeking a highly skilled and detail-oriented Engineering Technician II to join our team at Sierra Space. As an Engineering Technician II, you will be responsible for performing a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.Key Responsibilities:Construct, troubleshoot, calibrate, test, and...

  • Collision Repair Technician

    5 months ago

    Durham, United States Collision Specialists Full time

    Collision Repair TechnicianBenefits:CSI is NOT a big corporate shop, and we are seeking those that value this. CSI co-owners work daily at the shop to foster a family feeling work environment, professionalism, integrity, real, and a genuine worthy team effort, while keeping the selfish/complaining types out of the CSI family.We’ve heard plenty of repair...

  • CNC Machinist Position

    3 weeks ago

    Durham, North Carolina, United States Aerotek Full time

    CNC Machinist Job DescriptionWe are seeking a skilled CNC Machinist to join our team at Aerotek. As a CNC Machinist, you will be responsible for setting up, operating, and maintaining 5 Axis CNC Milling machines.Key Responsibilities:Set up and operate 5 Axis CNC Milling machinesPerform set ups, changeovers, adjustments, tooling changes, touching off tooling,...

  • CNC Machinist Position

    4 weeks ago

    Durham, North Carolina, United States Aerotek Full time

    CNC Machinist Job DescriptionWe are seeking a skilled CNC Machinist to join our team at Aerotek. As a CNC Machinist, you will be responsible for setting up, operating, and maintaining 5 Axis CNC Milling machines.Key Responsibilities:Set up and operate 5 Axis CNC Milling machines to produce custom parts.Perform set ups, changeovers, adjustments, tooling...

  • CNC Machinist Position

    4 weeks ago

    Durham, North Carolina, United States Aerotek Full time

    CNC Machinist Job DescriptionWe are seeking a skilled CNC Machinist to join our team at Aerotek. As a CNC Machinist, you will be responsible for setting up, operating, and maintaining 5 Axis CNC Milling machines.Key Responsibilities:Set up and operate 5 Axis CNC Milling machines to produce custom parts.Perform set ups, changeovers, adjustments, tooling...

  • CNC Machinist

    4 weeks ago

    Durham, North Carolina, United States Hobson & Motzer Full time

    Job Title: Weekend CNC Technician Level 2This is a full-time position that requires working 36 hours per week, with 12-hour shifts on Fridays, Saturdays, and Sundays. The successful candidate will be responsible for setting up and operating machines and related equipment to produce high-quality products.Key Responsibilities:Mount, install, align, and secure...

  • CNC Machinist

    1 month ago

    Durham, United States Aerotek Full time

    HIRING IMMEDIATELY FOR 2ND AND 3RD SHIFT CNC MACHINISTS IN THE MEBANE, NC AREA!Pay: $24-32/HR. TO START + PAY RAISESSCHEDULES: 2nd SHIFT: 2 PM - 10:30 PM MONDAY - FRIDAY 3rd SHIFT: 10 PM - 6:30 AM SUNDAY - THURSDAY*MUST HAVE 5 AXIS CNC MILL EXPERIENCE* Description: This will be a custom CNC machinist position working with 5 Axis CNC Milling machines. Set...

  • Mechanic - Vehicle/Equipment Repair Technician II (Durham Co) - Skilled Repair Professional

    3 days ago

    Durham, North Carolina, United States TransForce Full time

    Job SummaryThis position with TransForce offers a competitive salary and opportunities for career development. The salary range is $36-$64, with the maximum hiring rate for this position being $57,177. The selected candidate must be able to legally operate CDL required equipment/trucks with both manual and automatic transmissions at the time of hire or...

  • CNC Machinist

    4 weeks ago

    Durham, North Carolina, United States Aerotek Full time

    CNC Machinist Job DescriptionAerotek is seeking a skilled CNC Machinist to join our team in the Mebane, NC area. As a CNC Machinist, you will be responsible for setting up, operating, and maintaining 5 Axis CNC Milling machines.Key Responsibilities:Set up and operate 5 Axis CNC Milling machines to produce custom parts.Perform setup, changeovers, adjustments,...

  • Assembly Technician II

    2 weeks ago

    Durham, North Carolina, United States PowerSecure International Full time

    Job Summary:The Assembly Technician II role is responsible for the assembly of power generation equipment, including generators, enclosures, energy storage units, and PECs. This position requires following work instructions created from engineering drawings to build power generation equipment to specified design. The Assembly Technician II position is tasked...

  • Maintenance Technician II

    1 month ago

    Durham, North Carolina, United States PRG Real Estate Management Inc Full time

    Job Title: Maintenance Technician IIPRG Real Estate Management Inc is seeking a skilled Maintenance Technician II to join our team. As a key member of our maintenance team, you will be responsible for ensuring the timely and accurate fulfillment of all service requests and repairs.Key Responsibilities:Adhere to standardized diagnostic approaches for...

  • CNC Machinist

    4 weeks ago

    Durham, United States Aerotek Full time

    HIRING IMMEDIATELY FOR 2ND AND 3RD SHIFT CNC MACHINISTS IN THE MEBANE, NC AREA!Pay: $24-32/HR. TO START + PAY RAISESSCHEDULES:2nd SHIFT: 2 PM - 10:30 PM MONDAY - FRIDAY3rd SHIFT: 10 PM - 6:30 AM SUNDAY - THURSDAY*MUST HAVE 5 AXIS CNC MILL EXPERIENCE*Description:This will be a custom CNC machinist position working with 5 Axis CNC Milling machines.Set up,...

  • CNC Press Brake Specialist

    3 weeks ago

    Durham, North Carolina, United States The Steel Network Full time

    Job Title: CNC Press Brake OperatorWe are seeking a skilled CNC Press Brake Operator to join our team at The Steel Network, Inc. (TSN). As a leading national manufacturer of light steel framing building products, we pride ourselves on our collaborative environment and opportunities for growth and development.Job Summary:The CNC Press Brake Operator will be...

  • Assembly Technician II

    2 months ago

    Durham, North Carolina, United States PowerSecure International Full time

    Job Summary:The Assembly Technician II role is a critical position within PowerSecure International, responsible for the assembly of power generation equipment, including generators, enclosures, energy storage units, and PECs. This position requires a high level of technical expertise and attention to detail, as the Assembly Technician II will be working...

  • Assembly Technician II

    4 weeks ago

    Durham, North Carolina, United States PowerSecure International Full time

    Job Summary:The Assembly Technician II role is responsible for the assembly of power generation equipment, including generators, enclosures, energy storage units, and PECs. This role requires following work instructions created from engineering drawings to build power generation equipment to specified design.The Assembly Technician II position is tasked with...

  • Repair Technician

    3 weeks ago

    Durham, United States Manpower Full time

    Our client an electronics manufacturer is seeking a Repair Technician to join their team. The ideal candidate will have trouble shooting experience, knowledge of hand tools and attention to detail which will align successfully in the organization.   Job Title: Repair Technician Location: Durham, NC Pay Range: $16   What’s the Job? Trouble...

  • Maintenance Technician

    4 days ago

    Durham, North Carolina, United States AISIN North Carolina Corporation Full time

    Job Title: Maintenance TechnicianJob Summary:We are seeking a skilled Maintenance Technician to join our team at AISIN North Carolina Corporation. As a Maintenance Technician, you will be responsible for maintaining the condition of our manufacturing equipment, repairing and/or replacing failed components, and performing preventative maintenance measures...