Outside Machinist II

4 weeks ago

San Diego, United States EPSILON SYSTEMS Full time

Epsilon Systems Solutions, Inc. is seeking a full-time Outside Machinist II in San Diego, CA. Summary: The position will provide maintenance, repair and technical support to the customer. Provides technical support on shipboard machinery systems as a subject matter expert. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) that contain information required to accomplish work. This position will be under limited supervision. Duties and Responsibilities:
Accomplishes mechanical repairs and testing onboard ships and in the shop. Work includes, but is not limited to, removal, repairs, overhaul, installation, alignment, troubleshooting, modifying, and testing on ship's mechanical systems and components including, but not limited to:
Antenna Tilting Group (ATG) twin and single boom, and Bath Iron works ATG unit overhaul and PF-109 Ball screw.
Boat davit nitrogen charged accumulator along with system nitrogen and hydro charging test as part of the function al test of the operation system.
Torpedo strike down and torpedo strike down lift hatch and dogging hatch actuator cylinder overhauled or replace assembly.
Various types and sizes of marine pumps. Includes, but is not limited to centrifugal pump, vane pump, sliding shoe pump, and piston pumps along with assorted pipe interferes, coupling, mechanical seal removal and installation on pump shaft, along with coupling alignment.
Anchor winch, steering pumps, close and open-ended pump, removal of assorted pipe interferences, coupling, pump housing and impeller as require for mechanical spring seats and seal removal and installation on pump shaft, along with coupling alignment.
Capstan/winches/anchor windless, sliding pad eyes, brake repairs, deck drains, towing array equipment, slew motor gear assemble.
Slew motor repair, Luff cylinder, hydraulic and pneumatic repair and overhaul.
Retractable bitts and roller chock repairs.
Stern tube shaft seal repairs
Baxter bolt removal, re-tapping and cleaning of bolt threads and deck plug threads.
Drill, tap and thread various bolts/studs and fasteners.


Follows guidelines and procedures set forth in Formal Work Packages. Read, interpret, understand and work to the requirements of appropriate technical manuals, drawings and blue prints.

Required Qualifications:
High school diploma or equivalent
Minimum 4 years of work-related experience performing diagnostic inspections and repairs on Navy ship mechanical systems
Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts
Ability to pass PQS 301 Craftsmen qualifications
Ability to read schematics and blue prints
Ability to read technical manuals and repair standards
Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings
Ability to obtain and maintain DOD Secret Clearance
Ability to obtain and maintain access to military and government installations and private shipyards.

Pay Range: The pay range for this role is $26.07 - $32.30 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations:
Requires walking, reaching, sitting and concentration in the presence of occasional noise
Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships)
Ability to lift, carry and move objects up to 50 lbs. in weight
Office, warehouse, laboratory, pier side, shipboard
Noise conditions range from very quiet to loud

Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.

  • Outside Machinist

    2 months ago

    San Diego, United States TalentSource Full time

    About the job Outside Machinist As an Outside Machinist at Talent Source, you will be responsible for performing mechanical maintenance, repair, and installation activities on marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position:Responsibilities: Conduct mechanical maintenance and repair tasks...

  • Outside Machinist II

    1 week ago

    San Diego, United States EPSILON SYSTEMS Full time

    Epsilon Systems Solutions, Inc. is seeking a full-time Outside Machinist II in San Diego, CA. Summary: The position will provide maintenance, repair and technical support to the customer. Provides technical support on shipboard machinery systems as a subject matter expert. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos,...

  • Outside Machinist

    1 week ago

    San Diego, United States Talent Source Full time

    Job DescriptionJob DescriptionAs an Outside Machinist at Talent Source, you will be responsible for performing mechanical maintenance, repair, and installation activities on marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position:Responsibilities:Conduct mechanical maintenance and repair tasks on...

  • Outside Machinist

    3 weeks ago

    San Diego, United States Talent Source Full time

    Job DescriptionJob DescriptionAs an Outside Machinist at Talent Source, you will be responsible for performing mechanical maintenance, repair, and installation activities on marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position:Responsibilities:Conduct mechanical maintenance and repair tasks on...

  • Outside Machinist

    1 month ago

    San Diego, United States TalentSource Full time

    As an Outside Machinist at Talent Source, you will be responsible for performing mechanical maintenance, repair, and installation activities on marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position: Responsibilities: Conduct mechanical maintenance and repair tasks on marine propulsion...

  • Outside Machinist

    1 month ago

    San Diego, United States Talent Source Full time

    Job DescriptionJob DescriptionAs an Outside Machinist at Talent Source, you will be responsible for performing mechanical maintenance, repair, and installation activities on marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position:Responsibilities:Conduct mechanical maintenance and repair tasks on...

  • Outside Machinist

    1 month ago

    San Diego, United States Aerotek Full time

    **Description:**Capable of accomplishing the installation, maintenance, and repair of ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without Supervision. Capable of accomplishing the installation repair, and maintenance of ship's...

  • Outside Machinist

    1 week ago

    San Diego, United States Pier Solutions Full time $1,040 - $2,040

    Outside Machinist:Be a self-starter with little supervision required.Capable of accomplishing the installation, maintenance, and repair of ships propulsion and auxiliary systems including, but not limited to steam, Gas, Turbine, and Diesel propulsion systems rudders and steering gear, elevators, and deck equipment.Capable of accomplishing the installation...

  • Outside Machinist

    3 weeks ago

    San Diego, United States Ameri-Force Full time

    Job DescriptionJob DescriptionJob Description: Outside Machinist* Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal...

  • Outside Machinist

    3 weeks ago

    San Diego, California, United States Life Cycle Engineering Full time

    Outside Machinist Position Summary:As an Outside Machinist, you will provide maintenance, repair, and technical support to customers, serving as a subject matter expert at Southwest Regional Maintenance Center (SWRMC).Contract Specifications:Must be able to obtain/maintain a DBIDS badge and maintain base access.Essential Functions and...

  • Outside Machinist

    3 weeks ago

    San Diego, United States Ameri-Force Full time

    Job DescriptionJob DescriptionJob Description: Outside Machinist* Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal...

  • Outside Machinist

    3 weeks ago

    San Diego, United States Aerotek Full time

    **Job Title: Outside Machinist** **Job Description** We are seeking a skilled Outside Machinist who is capable of installing, maintaining, and repairing ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without supervision. The...

  • Outside Machinist

    4 weeks ago

    San Diego, United States Kros-Wise Full time

    Kros-Wise is looking for an Outside Machinist to support our client at the Southwest Regional Maintenance Center. The candidate shall accomplish mechanical repairs and testing onboard ships and in the shop. Work includes removal, repair, overhaul, installation, alignment, troubleshooting, modifying, and testing on ship's mechanical systems, equipment, and...

  • Outside Machinist

    3 weeks ago

    San Diego, United States Kros-Wise Full time

    Job DescriptionJob DescriptionKros-Wise is looking for an Outside Machinist to support our client at the Southwest Regional Maintenance Center. The candidate shall accomplish mechanical repairs and testing onboard ships and in the shop. Work includes removal, repair, overhaul, installation, alignment, troubleshooting, modifying, and testing on ship's...

  • Outside Machinist

    1 month ago

    San Diego, United States Kros-Wise Full time

    Kros-Wise is looking for an Outside Machinist to support our client at the Southwest Regional Maintenance Center. The candidate shall accomplish mechanical repairs and testing onboard ships and in the shop. Work includes removal, repair, overhaul, installation, alignment, troubleshooting, modifying, and testing on ship's mechanical systems, equipment, and...

  • Outside Machinist

    1 month ago

    San Diego, United States Kros-Wise Full time

    Job DescriptionJob DescriptionKros-Wise is looking for an Outside Machinist to support our client at the Southwest Regional Maintenance Center. The candidate shall accomplish mechanical repairs and testing onboard ships and in the shop. Work includes removal, repair, overhaul, installation, alignment, troubleshooting, modifying, and testing on ship's...

  • Journeyman Outside Machinist

    1 week ago

    San Diego, United States Aerotek Full time

    **Job Title: Outside Machinist** **Job Description** We are seeking a skilled Outside Machinist who is capable of installing, maintaining, and repairing ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without supervision. The...

  • Marine Outside Machinist

    4 days ago

    San Diego, United States Tradesmen International Full time

    Description: Tradesmen International is immediately hiring experienced Marine Outside Machinist for a project located in San Diego, CA. This is a first shift opportunity and the pay rate is up to $36/hour based on experience and skill level.  If you are an Outside Machinist and want to work alongside other proven craftsmen who emphasize safety,...

  • Marine Outside Machinist

    3 weeks ago

    San Diego, United States Tradesmen International Full time

    Description: Tradesmen International is immediately hiring experienced Marine Outside Machinist for a project located in San Diego, CA. This is a first shift opportunity and the pay rate is up to $36/hour based on experience and skill level. If you are an Outside Machinist and want to work alongside other proven craftsmen who emphasize safety, productivity...

  • Outside Machinist Journeyman

    2 weeks ago

    San Diego, United States Continental Maritime of San Diego Full time

    Job DescriptionJob DescriptionJOB DESCRIPTIONEmployment Type: Full Time/Hourly/Non-ExemptSalary Information: $25.44 - $36.35/HourlyWho We AreContinental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift...