Electrical Cable and Harness Designer

4 weeks ago

Sterling Heights, United States DCS Corp Full time

Electrical Cable and Harness Design

This position will be responsible for the, design and development, and delivery of multiple Electrical Cable and Harness engineering design solutions for military Ground Vehicle applications.  This role provides the opportunity to be part of an engineering team, take ownership of the cable and harness development from requirements documentation, design and development, fabrication, test and product delivery. This position will be located in Warren, MI and with responsibilities including (but not limited to) the following Cable and Harness Engineer (CHE) tasks for ground R&D and fielded Ground Vehicle programs. The position is open to individuals with 5-10+ years of relevant experience in automotive cable and harness design.  A Bachelor’s degree in electrical or electro mechanical engineering is required.

Essential Job Functions:

Define and develop electrical interconnects through coordination with system, subsystem, and unit engineers including: Interconnect diagrams, schematics, and assembly drawings that meet MIL-STD and industry standards.

Participate in product teams with subsystems to ensure interface requirements are understood and met.

Incorporate system requirements flow down requirements into the harness/cable designs.

Prepare input for project Design Reviews data packages and support design reviews PDR and CDR.

Prepare and present harness subsystem design, architecture and implementation plans at various design team meetings and reviews.

Assist in establishing harness/cable routing and segmentation.

Perform analysis including:

Power and  Voltage drop analysis and capacitance studies.

RF transmission line analysis and performance.

Signal protection fuses diode resistors, embedded circuit modules.

EMI and EMC shielding.

Cable bundle sizing and branches.

Thermal, environmental and POL resistance.

Prepare and release specifications, manufacturing assembly drawings, and methods and special tooling.

Provide support to manufacturing and quality control  and test.

Support the integration team to solve issues with cabling and harness issues.

Develop procedures and reports as required to support the Engineering Team and Field Service Representatives.

Support Test Incident Report (TIR) and Failure Analysis and Corrective Action Report (FACAR) resolution.

Required Skills:

Due to the sensitivity of customer related requirements, U.S. Citizenship is required.

Ability to obtain and maintain a DoD Secret clearance.

B.S. in Electrical Engineering or related technical discipline in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university with Five to Ten  years of engineering experience working cable and harness development in the automotive or aerospace field.

Electrical Cable and harness design, assembly, and systems integration and test experience.

Engineering design inputs for system Technical Data Package Development TDP development.

Comfortable working in a fast paced inter-disciplinary environment and handling multiple projects simultaneously.

Self-motivated with ability to work in a team environment with a high level of attention to detail.

Detail-oriented and have excellent verbal and written communications skills and organization skills.

Extensive knowledge of military and commercial standards of connectors, wires, and contacts for ground vehicles and aerospace applications such as MIL-C-38999, MIL-C-24308, MIL-DTL-83513, MIL-C-5015.

Knowledge of Military and Commercial Standards such as MIL-STD-810, MIL-STD-1472, MIL-STD-1275, MIL-STD-461, IPC-610 and IPC-620, ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M & ASME-14.3.

Proficient using harness design software tools such as Visio, Creo, or Zuken to develop schematics, bill of materials and assembly drawing as well as PLM systems such and Windchill for configuration management.

Experience working on commercial or military ground vehicles or aerospace systems.

  • Electrical Cable and Harness Designer

    2 months ago

    Sterling Heights, United States DCS Corp Full time

    Job DescriptionJob DescriptionElectrical Cable and Harness DesignThis position will be responsible for the, design and development, and delivery of multiple Electrical Cable and Harness engineering design solutions for military Ground Vehicle applications. This role provides the opportunity to be part of an engineering team, take ownership of the cable and...

  • Harness Electrical Engineer

    2 months ago

    Sterling Heights, United States Infotree Global Solutions Full time

    Producing a BOM for an electrical wiring harness composed of components like connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, and more.Creating harness components that meet key performance and timing targets by teaming up with Product Engineering, EMC, Systems Engineering, Packaging Analysis, Design Services, Planning, and...

  • Harness Electrical Engineer

    2 months ago

    Sterling Heights, United States Infotree Global Solutions Full time

    Producing a BOM for an electrical wiring harness composed of components like connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, and more.Creating harness components that meet key performance and timing targets by teaming up with Product Engineering, EMC, Systems Engineering, Packaging Analysis, Design Services, Planning, and...

  • Harness Electrical Engineer

    2 weeks ago

    Sterling Heights, United States Infotree Global Solutions Full time

    Producing a BOM for an electrical wiring harness composed of components like connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, and more.Creating harness components that meet key performance and timing targets by teaming up with Product Engineering, EMC, Systems Engineering, Packaging Analysis, Design Services, Planning, and...

  • Harness Electrical Engineer

    2 months ago

    Sterling Heights, United States Infotree Global Solutions Full time

    Producing a BOM for an electrical wiring harness composed of components like connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, and more.Creating harness components that meet key performance and timing targets by teaming up with Product Engineering, EMC, Systems Engineering, Packaging Analysis, Design Services, Planning, and...

  • Product Manager

    1 day ago

    Sterling, United States Anderson Power Products Full time

    Overview: ANDERSON POWER PRODUCTS, a wholly owned subsidiary of IDEAL INDUSTRIES, Inc., is an industry leader in the design and manufacture of electrical power connectors. Anderson Power Products partners with leading edge companies to create innovative connector designs that leverage contact technology and high power expertise to provide superior value to...

  • Harness Design Engineer

    2 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and timing...

  • Harness Design Engineer

    2 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and timing...

  • Harness Design Engineer

    1 day ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and...

  • Harness Engineer

    3 weeks ago

    Sterling Heights, United States The Panther Group Full time

    Primary Tasks Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, br Systems Engineer, Engineer, Microsoft, Designer, Product Engineer, Staffing, Support

  • Harness Engineer

    2 weeks ago

    Sterling Heights, United States Contract Professionals, Inc Full time

    Primary Tasks: Lead the development and documentation of component and subsystem requirements for the electrical harness system. Design electrical wiring harness BOM, including component selection for connectors, backshells, sleeving, cables, braidin Systems Engineer, Engineer, Microsoft, Product Engineer, Staffing, Design, Support

  • Wire Harness Design Engineer

    2 weeks ago

    Sterling Heights, United States HRU Technical Resources Full time

    Job DescriptionJob DescriptionPrimary Tasks:   Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components...

  • Harness Engineer

    2 days ago

    Sterling Heights, United States Softworld Inc Full time

    Job Title: Harness Engineer Job Location: Sterling Heights Michigan 48310 Onsite Requirements: Harness design Creo Bachelors in electrical engineering Job Description: Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include...

  • Harness Engineer

    13 hours ago

    Sterling Heights, United States Soft-World Full time

    Job Title: Harness Engineer Job Location: Sterling Heights Michigan 48310 Onsite Requirements: Harness design Creo Bachelors in electrical engineering Job Description: Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component...

  • Harness Engineer

    3 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance...

  • Wiring Harness/Electrical Engineer(CHS/Capital logic)

    3 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and timing...

  • Wiring Harness/Electrical Engineer(CHS/Capital logic)

    3 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and timing...

  • Wiring Harness/Electrical Engineer(CHS/Capital logic)

    3 weeks ago

    Sterling Heights, United States Detroit Engineered Products Full time

    Primary Tasks: Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding, sealants, boots, transitions, etc. Developing harness components to meet key performance and timing...

  • Harness Engineer

    2 days ago

    Sterling Heights, United States Spark Talent Inc Full time

    Job DescriptionJob DescriptionPosition: Harness Engineer Location: Sterling Heights, MIPosition Responsibilities:Leading the development and documentation of component and subsystem requirements for the electrical harness system. Designing electrical wiring harness BOM to include component selection for connectors, backshells, sleeving, cables, braiding,...

  • Electrical Design Specialist

    4 weeks ago

    Sterling Heights, United States Amtec Enterprise - 1 Full time

    Job DescriptionJob DescriptionElectrical Design Specialist Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and housing...