Electrical Cable and Harness Designer

3 weeks ago

Sterling Heights, United States DCS Corp Full time
Job DescriptionJob Description

Electrical Cable and Harness Design

This position will be responsible for the, design and development, and delivery of multiple Electrical Cable and Harness engineering design solutions for military Ground Vehicle applications. This role provides the opportunity to be part of an engineering team, take ownership of the cable and harness development from requirements documentation, design and development, fabrication, test and product delivery. This position will be located in Warren, MI and with responsibilities including (but not limited to) the following Cable and Harness Engineer (CHE) tasks for ground R&D and fielded Ground Vehicle programs. The position is open to individuals with 5-10+ years of relevant experience in automotive cable and harness design. A Bachelor’s degree in electrical or electro mechanical engineering is required.

Essential Job Functions:

Define and develop electrical interconnects through coordination with system, subsystem, and unit engineers including: Interconnect diagrams, schematics, and assembly drawings that meet MIL-STD and industry standards.

Participate in product teams with subsystems to ensure interface requirements are understood and met.

Incorporate system requirements flow down requirements into the harness/cable designs.

Prepare input for project Design Reviews data packages and support design reviews PDR and CDR.

Prepare and present harness subsystem design, architecture and implementation plans at various design team meetings and reviews.

Assist in establishing harness/cable routing and segmentation.

Perform analysis including:

Power and Voltage drop analysis and capacitance studies.

RF transmission line analysis and performance.

Signal protection fuses diode resistors, embedded circuit modules.

EMI and EMC shielding.

Cable bundle sizing and branches.

Thermal, environmental and POL resistance.

Prepare and release specifications, manufacturing assembly drawings, and methods and special tooling.

Provide support to manufacturing and quality control and test.

Support the integration team to solve issues with cabling and harness issues.

Develop procedures and reports as required to support the Engineering Team and Field Service Representatives.

Support Test Incident Report (TIR) and Failure Analysis and Corrective Action Report (FACAR) resolution.

Required Skills:

Due to the sensitivity of customer related requirements, U.S. Citizenship is required.

Ability to obtain and maintain a DoD Secret clearance.

B.S. in Electrical Engineering or related technical discipline in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university with Five to Ten years of engineering experience working cable and harness development in the automotive or aerospace field.

Electrical Cable and harness design, assembly, and systems integration and test experience.

Engineering design inputs for system Technical Data Package Development TDP development.

Comfortable working in a fast paced inter-disciplinary environment and handling multiple projects simultaneously.

Self-motivated with ability to work in a team environment with a high level of attention to detail.

Detail-oriented and have excellent verbal and written communications skills and organization skills.

Extensive knowledge of military and commercial standards of connectors, wires, and contacts for ground vehicles and aerospace applications such as MIL-C-38999, MIL-C-24308, MIL-DTL-83513, MIL-C-5015.

Knowledge of Military and Commercial Standards such as MIL-STD-810, MIL-STD-1472, MIL-STD-1275, MIL-STD-461, IPC-610 and IPC-620, ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M & ASME-14.3.

Proficient using harness design software tools such as Visio, Creo, or Zuken to develop schematics, bill of materials and assembly drawing as well as PLM systems such and Windchill for configuration management.

Experience working on commercial or military ground vehicles or aerospace systems.

  • Electrical Cabling/Harness Designer with CREO

    1 week ago

    Sterling Heights, United States Indotronix International Corporation Full time

    Onsite Job: Electrical Cabling/Harness Designer with CREO Location: Sterling Heights, MI & Minneapolis, MN Duration: 06+ Months Contract Work Schedule: 9/80 Associate Degree and 4+ years exp - Must

  • Electrical Design Specialist

    23 hours ago

    Sterling Heights, United States Amtec Enterprise - 1 Full time

    Job DescriptionJob DescriptionElectrical Design Specialist Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and housing...

  • Sr. Design Specialist

    1 month ago

    Sterling Heights, United States USPRO Full time

    Sr. Design Specialist (EE)Sterling Heights, MIDuration: 6 month contractResponsibilities:Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment.Designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from...

  • Sr. Design Specialist

    1 month ago

    Sterling Heights, United States USPRO Full time

    Sr. Design Specialist (EE)Sterling Heights, MIDuration: 6 month contractResponsibilities:Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment.Designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from...

  • Sr. Design Specialist

    1 month ago

    Sterling Heights, United States USPRO Full time

    Sr. Design Specialist (EE)Sterling Heights, MIDuration: 6 month contractResponsibilities:Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment.Designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from...

  • CREO CAD Designer

    1 week ago

    Sterling Heights, United States Donatech Corporation Full time

    Support a Fortune 500 Aero-Defense Company as a CREO CAD Designer. EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit...

  • CREO CAD Designer

    1 week ago

    Sterling Heights, United States Donatech Corporation Full time

    Support a Fortune 500 Aero-Defense Company as a CREO CAD Designer. EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit...

  • CREO CAD Designer

    1 week ago

    Sterling Heights, United States Donatech Corporation Full time

    Support a Fortune 500 Aero-Defense Company as a CREO CAD Designer. EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit...

  • Electrical Design Specialist

    1 day ago

    Sterling Heights, United States HRU Technical Resources Full time

    Job DescriptionJob DescriptionJob Title:Electrical Design Specialist (Creo)Type of Position:6-month contract position to start. Likely to be extended – good chance of ultimately going direct hire.Candidate Requirements:This role requires candidates to be US Citizens or Permanent Residents (Green Card Holders). Candidates on CPT, OPT, H1B or TN visas are...

  • Design Engineer

    5 days ago

    Sterling Heights, United States US Tech Solutions Full time

    Role: Design Engineer Duration- 06 months Location- Sterling Heights, MI Position Description EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs...

  • Electro Mechanical Designer

    2 days ago

    Sterling Heights, United States Amtec Inc. Full time

    Position is onsite in Sterling Heights, MI or Minneapolis, MNPerforms design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and housing...

  • Senior Design Engineer

    5 days ago

    Sterling Heights, United States Compunnel Full time

    **THIS IS NOT A REMOTE ROLE. IT WILL BE AN ON-SITE ROLE BASED OUT OF STERLING HEIGHTS, MICHIGAN** Position Description: Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs...

  • Electro Mechanical Designer

    3 days ago

    Sterling Heights, United States Amtec Inc. Full time

    Position is onsite in Sterling Heights, MI or Minneapolis, MNPerforms design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and housing...

  • Design Specialist

    7 days ago

    Sterling Heights, United States Trispoke managed services Full time

    Job DescriptionJob DescriptionJob description:EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and...

  • Design Specialist

    1 week ago

    Sterling Heights, United States Trispoke managed services Full time

    Job DescriptionJob DescriptionJob description:EE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall line replaceable unit (LRU) chassis and...

  • Design Engineer

    1 week ago

    Sterling Heights, United States US Tech Solutions Full time

    Role: Design Engineer Duration- 06 monthsLocation- Sterling Heights, MIPosition DescriptionEE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall...

  • Design Engineer

    1 week ago

    Sterling Heights, United States US Tech Solutions Full time

    Role: Design Engineer Duration- 06 monthsLocation- Sterling Heights, MIPosition DescriptionEE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall...

  • Design Engineer

    1 week ago

    Sterling Heights, United States US Tech Solutions Full time

    Role: Design Engineer Duration- 06 monthsLocation- Sterling Heights, MIPosition DescriptionEE Design Specialist II Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering. Performs overall...

  • CREO Designer

    7 days ago

    Sterling Heights, United States ASRC Federal Full time

    Job Description Job Description: The US Army is currently exploring the use of leading-edge technology as the future of next generation ground-based combat vehicles, autonomous vehicle systems and tactical radio. ASRC Federal Professional Services is currently seeking a “CREO Designer” to grow as a professional within our organization,...

  • Senior Design Engineer

    7 days ago

    Sterling Heights, United States Compunnel Inc. Full time

    **THIS IS NOT A REMOTE ROLE. IT WILL BE AN ON-SITE ROLE BASED OUT OF STERLING HEIGHTS, MICHIGAN**Position Description:Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment.Designs wiring harness routing integration using schematic diagrams as supplied in rough form by electrical engineering.Performs overall...