Switchgear Quality Control Technician
4 weeks ago
Job Summary:
Perform all quality inspections and functional testing on all manufactured switchgear to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site after it leaves the manufacturing plant.
Must be able to reliably work an eight-hour minimum shift with some voluntary exceptions. To perform this job successfully, an individual must be able to perform each essential procedure safely and thoroughly. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications: (Education, Experience, Knowledge, and Skills):
- High school diploma.
- NFPA70E is required (Can be provided by PowerSecure if other requirements are satisfactory)
- Ability to read and interpret documents such as safety rules, operations manual, and written directions.
- Ability to follow report guidelines to accurately document test results and product specifications.
- Ability to add, subtract, multiply, and divide in all units of measure in order to determine splice plate length and basic voltage and amperage measurement ratios.
- Ability to wear and maintain proper PPE.
- Experience working with Switchgear, Electrical, or Generator systems.
- Engineering or programming experience will be accepted in lieu of Switchgear, Electrical or Generator experience.
- Understanding of electrical schematics and ability to interpret mechanical notes.
- Through accumulated experience, must be able to quickly and effectively diagnose and repair nonconforming electrical circuits.
- Excellent verbal and written communication skills required.
Job Duties and Responsibilities:
- Locate and keep track of documentation for specific jobs.
- Run procedural tests and inspections in an organized format complying with necessary functions for gear types.
- Load files and test sequence of operations as dictated in project CD set notes.
- Accurately record test results and component specs.
- Move gear with use of forklift or pallet jack.
- Removal and reinstallation of panels up to 50 lb.
- Other duties as assigned by management and supervisors.
Levels
Levels will be determined by skill and knowledge of inspection and testing procedures, capabilities, and general understanding of PowerSecure software.
L1 – SWGR QC Technician (Inspector)
L2 – SWGR QC Technician (Sr. Inspector)
L3 – SWGR QC Technician (Test)
L4 – SWGR QC Technician (Sr. Test)
Tech Level
Rec Yrs of Exp
Schematics
Mech Inspection
(SWGR)
Electrical
Inspection
(SWGR)
Document Control and Management (Revisions, Updates)
Medium Voltage and PEC Inspection
Training (Lead for QC L1 and Manufacturing)
Supplier Inspection
L1(Inspector)
0-3
X
X
X
L2(Sr. inspector)
3+
X
X
X
X
X
X
X
Tech Level
Rec Yrs of Exp
Schematics
Mech Inspection
Dielectric
Electrical Inspection
Ground Fault
Circuit Breaker (Secondary)
MDGF Ground
Circuit Breaker (Primary)
L3 (Test)
0-3
X
X
X
X
X
X
L4 (Sr. Test
3+
X
X
X
X
X
X
X
X
Additional Test Capability
Tech Level
Functional Test on Standard Products
Retail with basic programming and sequence testing
MVSG, CC, TCC, and PEC
System Sequencing with all equipment
Lead Factory Acceptance Witness Test and Develop Plans
L3
X
X
L4
X
X
X
X
X
Software Knowledge
Proficiency
Description
Woodward
(Easygens, LS-5/6, GC)
DEIF
(Genset,
Group, Plant)
GE Proficy (PLC and TS)
Redlion (LE, SX, and TS)
SEL Accelerator (SEL Relays)
Lantronix Device (SEC)
L3 (Tier I)
Basic understanding and ability to troubleshoot, load and upload files
X
X
X
X
L4 (Tier II)
X
X
X
X
X
X
Physical Demands and Work Environment:
Must be able to lift up to 50 lbs. frequently. Must be able to spend extended hours standing. Must be able to crouch into confined spaces to attach test wiring.
Work Environment: in rare cases, when working outdoors, there will be exposure to the elements. This can include, but is not limited to, heat, cold, or rain. A risk of electrical shock is always present. At times there can be hazards from moving equipment (i.e.: forklifts). There can be a lot of ambient noise, and in some cases hearing protection must be worn. Risk of cuts or abrasions is present, especially when dealing with panels, or maneuvering between units for splice plate measurements or mechanical checks.
About Us:
PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers.
Join Our Power Team
We invest in high-value and cost-effective benefits for our employees. Our benefits package includes:
- Medical, dental, vision and life insurance coverage
- Competitive pay and a matching 401 (k) plan
- Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days)
- Flexible spending accounts/Health savings account
- Wellness Incentive Programs
- Employee Referral Program
- Tuition Reimbursement
PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters.
-
PowerGen Quality Control Technician
4 weeks ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionSummaryPerform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site after it leaves the manufacturing plant.Qualification...
-
PowerGen Quality Control Technician
3 weeks ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionSummaryPerform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site after it leaves the manufacturing plant.Qualification...
-
PowerGen Quality Control Technician
3 weeks ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionSummaryPerform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site after it leaves the manufacturing plant.Qualification...
-
PowerGen Quality Control Technician
1 month ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionSummaryPerform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site after it leaves the manufacturing plant.Qualification...
-
PowerGen Quality Control Technician
1 week ago
Durham, North Carolina, United States PowerSecure, Inc. Full timeJob DescriptionSummaryCarry out inspections and functional tests on manufactured generator systems to ensure compliance with electrical codes and safety standards. Make sure the systems function as designed and are safe for on-site operation.Qualification RequirementsAvailability to work an eight-hour shift with occasional exceptions. Must be capable of...
-
Quality Control Technician
1 month ago
Durham, United States Medasource Full timeTitle: QC Environmental Monitoring TechnicianDuration: 6–12-month contractLocation: Durham, NCFirst and second shift work may be required.12 hour shifts on 2-2-3 scheduleMinimal travel required.Some allergens are present in the parenteral plant.Summary:The QC Environmental Monitoring Technician will perform routine and investigational environmental...
-
Quality Control Technician
3 weeks ago
Durham, United States Medasource Full timeTitle: QC Environmental Monitoring TechnicianDuration: 6–12-month contractLocation: Durham, NCFirst and second shift work may be required.12 hour shifts on 2-2-3 scheduleMinimal travel required.Some allergens are present in the parenteral plant.Summary:The QC Environmental Monitoring Technician will perform routine and investigational environmental...
-
Microgrid Field Technician
3 weeks ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionJob SummaryProvide technical oversight and management of the commissioning and field engineering related activities for all the PowerSecure Inc. Distributed Infrastructures Systems. This position will be the clear bond between the client, PowerSecure engineering, PowerSecure Service, and operation entities for the successful...
-
Microgrid Field Technician
4 weeks ago
Durham, United States PowerSecure, Inc. Full timeJob DescriptionJob DescriptionJob SummaryProvide technical oversight and management of the commissioning and field engineering related activities for all the PowerSecure Inc. Distributed Infrastructures Systems. This position will be the clear bond between the client, PowerSecure engineering, PowerSecure Service, and operation entities for the successful...
-
Controls System Technician
3 weeks ago
Durham, United States Malace HR Full timeJob DescriptionJob DescriptionThe Control Systems Technician will be working within a 24x7 warehouse/logistics environment providing operations and maintenance services to controls, focusing on equipment troubleshooting and maintaining material handling equipment such as conveyors, sortation systems, scanners, cameras, print and apply systems, scales, HMI...
-
Controls System Technician
4 weeks ago
Durham, United States Malace HR Full timeJob DescriptionJob DescriptionThe Control Systems Technician will be working within a 24x7 warehouse/logistics environment providing operations and maintenance services to controls, focusing on equipment troubleshooting and maintaining material handling equipment such as conveyors, sortation systems, scanners, cameras, print and apply systems, scales, HMI...
-
Controls System Technician
4 weeks ago
Durham, United States Malace HR Full timeJob DescriptionJob DescriptionThe Control Systems Technician will be working within a 24x7 warehouse/logistics environment providing operations and maintenance services to controls, focusing on equipment troubleshooting and maintaining material handling equipment such as conveyors, sortation systems, scanners, cameras, print and apply systems, scales, HMI...
-
Controls System Technician
2 weeks ago
Durham, United States Malace HR Full timeJob DescriptionJob DescriptionThe Control Systems Technician will be working within a 24x7 warehouse/logistics environment providing operations and maintenance services to controls, focusing on equipment troubleshooting and maintaining material handling equipment such as conveyors, sortation systems, scanners, cameras, print and apply systems, scales, HMI...
-
Pest Control Technician
1 month ago
Durham, United States Rollins Full time** Pest Control Technician** **Job Category****:** Outside Service Technician **Requisition Number****:** PESTC18333 Showing 1 location **Job Details** **Description** ****At Orkin, our purpose is to help protect the world where we live, work, and play.**** Our **Service Technicians** are committed to this purpose. Orkin is the pest management INDUSTRY...
-
Director of Quality Control
4 weeks ago
Durham, United States Kinetics Full timeFounded in 1973, Kinetics is a global full-service process and mechanical contractor specializing in the design and installation of process, mechanical, plumbing and HVAC systems. We have proven experience supporting global clients in the microelectronic, solar, biopharmaceutical, data center, R&D, and other technology-driven markets. With approximately 2000...
-
Director of Quality Control
6 days ago
Durham, United States Kinetics Full timeFounded in 1973, Kinetics is a global full-service process and mechanical contractor specializing in the design and installation of process, mechanical, plumbing and HVAC systems. We have proven experience supporting global clients in the microelectronic, solar, biopharmaceutical, data center, R&D, and other technology-driven markets. With approximately 2000...
-
Director of Quality Control
3 weeks ago
Durham, United States Kinetics Full timeFounded in 1973, Kinetics is a global full-service process and mechanical contractor specializing in the design and installation of process, mechanical, plumbing and HVAC systems. We have proven experience supporting global clients in the microelectronic, solar, biopharmaceutical, data center, R&D, and other technology-driven markets. With approximately 2000...
-
Quality Control Inspector
4 weeks ago
Durham, United States HW Staffing Solutions- Hot Jobs Full timeJob DescriptionJob DescriptionWe are hiring Quality Control Inspectors to ensure the compliance of incoming and outgoing material and components for a manufacturing facility in Durham, Connecticut. Pay starts at $19.00-$21.00 per hour, depending on experience, operating on 1st shift, Monday - Friday, 7:00am-4:30pm. Quality Control Inspectors must be...
-
Quality Assurance Technician
1 week ago
Durham, United States restor3d Full timeJob DescriptionJob DescriptionJob Summary:The Quality Assurance Technician will be responsible for assisting in maintenance and implementation of the quality system of the company. Along with day-to-day assistance in release of product.Essential Duties and Responsibilities:Develop and maintain strong, internal working relationships across both North and...
-
Director of Quality Control
4 weeks ago
Durham, United States Kinetics Full timeFounded in 1973, Kinetics is a global full-service process and mechanical contractor specializing in the design and installation of process, mechanical, plumbing and HVAC systems. We have proven experience supporting global clients in the microelectronic, solar, biopharmaceutical, data center, R&D, and other technology-driven markets.With approximately 2000...