Aircraft Cabinet Maker III

4 weeks ago

Lake Charles, United States Citadel Completions LLC Full time
Job DescriptionJob Description

Purpose

Cabinet Maker III is proficient in reading blueprints; knowledgeable and experienced with various types of materials and has a high level of experience with table saw, band saw and word working equipment and requires no guidance in performing functions related to the fabrication and finishing of aircraft cabinets and interior components for wood, honeycomb or composite assemblies using design and engineering drawings and specifications.

Essential Job Functions

  • Fabricates aircraft furniture and other composite, honeycomb or wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity.
  • Assembles pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in sub-assemblies.
  • Applies exterior surface materials such as laminates, veneers, and cap strips.
  • Ensure the work area is kept to the highest standards of safety, compliant at all times, enforcing regulations and practices to avoid accidents. Ensure that good housekeeping practices are performed at all times.
  • Perform the proper tagging of Aircraft components, parts and panels appropriately stored (including racks by aircraft).
  • Perform documentation procedures and signoffs in accordance with Repair Station Quality Manual and respective task requirements.
  • Ensure that tools and equipment are correctly used and handled for both safety and to reduce breakages, wear and tear. Ensure tooling, GSE and ground equipment is returned to its proper storage area following use.
  • Strive for continuous process improvements and increasing efficiencies in execution and delivery with safety as a priority.
  • Maintain close and frequent communication with the Lead Technician, notifying him/her of progress and any roadblocks or threats to task accomplishment that could impact re-delivery.
  • Deal with customers in a cordial, respectful and professional manner.
  • Ensure the highest quality service, safety standards and performance, with the objective of exceeding customer satisfaction in the re-delivery of airworthy, reliable and clean aircraft, in a timely manner.
  • Take part in any required training as determined by the company.
  • Other duties as assigned.

Supervisory Responsibilities

This position has no direct supervisory responsibilities.

Qualifications

Aircraft Cabinet Maker III

Minimum Qualifications

  • Experienced with table saw, band saw, and woodworking equipment.
  • Proficient in reading blueprints.
  • Perform work fabrication, finishing, woodwork etc. without guidance.
  • Knowledge and experience with various types of materials.
  • At least two years of commercial cabinet shop production or finish carpentry experience.
    • Minimum one year experience in manufacturing, fitting and installation of custom cabinetry.
  • High school diploma or equivalent.
  • Proficient in oral and written English.
  • Must report for assignment with personal set of standard trade-specific tools.

Preferred Qualifications

  • 3+ years of experience in V/VVIP custom aircraft cabinet making.

Knowledge, Skills, Abilities, and Other Characteristics

  • Must be able to read and interpret engineering drawings, technical manuals, structure repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders.
  • Advanced knowledge of Aircraft Finish and Paint application processes applicable to high end VIP aircraft completions such as clear coat and paint working with composite and Aluminum panels.
  • Able to read, interpret and apply FAA approved or accepted data (i.e. IPC, M/M, OHM, SRM) proficiently.
  • Proven ability to work alone and in a team environment.
  • Effective decision-making skills.
  • Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately.
  • Motivation: must maintain a positive attitude and strong work energy.
  • Organization: very detail oriented and always prepared.

Working Conditions

The work is performed in an office environment, industrial shop, aircraft hangar, at the departure gate or on the aircraft parking ramp.

Physical Activity/Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position is considered MEDIUM work.

  • Requires frequent walking, standing and/or climbing.
  • Are expected to work through specially designed airframe, engine and undercarriage openings while standing on ladders or scaffolds; to use hoists and lifts; required precision instruments and other necessary tools.
  • Exposure to climate changes normally experienced in an aviation repair facility.

OCCASIONAL

FREQUENT

CONSTANT

  • Lift up to 50 pounds
  • Climbing, stooping, kneeling, squatting, and reaching
  • Lift up to 10 pounds
  • Standing
  • Repetitive movements of arms and hands
  • Sit with back supported





  • Aircraft Cabinet Maker

    2 weeks ago

    Lake Charles, United States AAA USA Inc Full time

    Job DescriptionJob DescriptionDescription:About the Company:We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do...

  • Airbus Cabinet Maker

    3 weeks ago

    Lake Charles, United States GAL AeroStaff Full time

    Job DescriptionJob DescriptionGAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry.In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays,...

  • Airbus Cabinet Maker

    3 days ago

    Lake Charles, Louisiana, United States GAL AeroStaff Full time

    Job SummaryGAL AeroStaff Ltd. is a leading aerospace staffing company specializing in temporary and permanent staffing for general and technical positions in the aviation and aerospace industry.We are seeking a highly skilled and experienced Cabinet Maker III to join our team. As an Aircraft Interior Specialist, you will be responsible for fabricating and...

  • Aircraft Technician III

    3 months ago

    Lake Charles, United States Citadel Completions LLC Full time

    Job DescriptionJob DescriptionPurposeTo perform all phases of repair, maintenance or modification on aircraft or component parts to include dismantling, repairing, assembling and erection of machinery and mechanical devices and the exchange and replacement of electrical equipment or electrical components. Essential Job FunctionsProficient at performing all...

  • Aircraft Technician I, II, III

    1 month ago

    Lake Charles, United States Citadel Completions LLC Full time

    PurposeTo perform all phases of repair, maintenance or modification on aircraft or component parts to include dismantling, repairing, assembling and erection of machinery and mechanical devices and the exchange and replacement of electrical equipment or electrical components. Essential Job FunctionsPerform 70% of routine tasks unassisted; i.e. lubes,...

  • Rotor Wing Pilot

    3 days ago

    Rice Lake, Wisconsin, United States Life Link III Full time

    About Life Link III:Life Link III is a premier, nationally recognized air medical transport company, renowned for its commitment to clinical excellence, superior aviation program, and reliable response in providing care to critically ill or injured patients. Our top priority is to give every patient their best chance for the best possible outcome,...

  • Rotor Wing Pilot

    6 days ago

    Rice Lake, Wisconsin, United States Life Link III Full time

    Job SummaryWe are seeking a highly skilled and experienced Rotor Wing Pilot to join our team at Life Link III. As a Rotor Wing Pilot, you will be responsible for ensuring the safe transportation of critically ill or injured patients to medical facilities.Key ResponsibilitiesConduct pre-flight inspections and ensure aircraft and weather conditions are...

  • Simulation Technician III

    3 months ago

    Lake Orion, United States OT Training Solutions Full time

    Job DescriptionJob Description Location: 16 month assignment – 4 months in Dearborn, Michigan, 12 months in CroatiaSummary/Scope of WorkThe Simulation Technician III applies advanced knowledge and experience to solve unusually complex or system problems; those that typically are not able to be solved solely by reference to maintenance manuals or similar...

  • Airfield Maintenance Specialist III

    3 months ago

    Salt Lake City, United States Salt Lake City Full time

    Position Title:Airfield Maintenance Specialist III (may underfill)Job Description:Are you ready to take flight in your career? The Salt Lake City Department of Airports is on the hunt for an energetic and dedicated Airfield Maintenance Specialist III (may underfill as I or II) to join our dynamic team. This pivotal role involves ensuring the day-to-day safe,...

  • Ground Service Technician III

    2 months ago

    Lake Charles, United States Citadel Completions LLC Full time

    Job DescriptionJob DescriptionPurpose:Assist the Facilities and Ground Support Equipment (GSE) Manager with inspection, maintenance and upkeep of the facility and equipment. Essential Job Functions:Service and operate all assigned ground support equipment, including tugs, large and small forklifts, scissor lifts, boom lifts, aircraft jacks, hydraulic test...

  • Ground Service Technician III

    2 months ago

    Lake Charles, United States Citadel Completions LLC Full time

    Job DescriptionJob DescriptionPurpose:Assist the Facilities and Ground Support Equipment (GSE) Manager with inspection, maintenance and upkeep of the facility and equipment. Essential Job Functions:Service and operate all assigned ground support equipment, including tugs, large and small forklifts, scissor lifts, boom lifts, aircraft jacks, hydraulic test...

  • Technician I, II or III

    2 months ago

    Salt Lake, Utah, United States ARUP Laboratories Full time

    Schedule:7-On/7-Off B week1:00 PM - 11:30 PMTraining Schedule:Monday - Friday (40 hours)7:00 AM - 3:30 PMDepartment: Molecular Automated - 652*Hourly rate is an estimate only which includes shift differential for nights, evenings, or weekend shifts. Overall hourly rates will vary based on schedule. Primary Purpose:The Technician I ($16.17) is in training to...

  • F-16 Structural Integrity Technician

    2 weeks ago

    Salt Lake, Utah, United States Daedalus Aviation Group Full time

    Join Our Team of Nondestructive Inspection ProfessionalsDaedalus Aviation Group is on the lookout for experienced and detail-oriented F-16 Structural Integrity Technicians to enhance our team. As an integral part of our maintenance crew, you will be pivotal in safeguarding the structural soundness and operational safety of F-16 fighter jets. Your proficiency...

  • Air Express Ramp Agent SLC

    2 months ago

    Salt Lake City, United States Worldwide Flight Services, Inc. Full time

    About WFS Join our Worldwide Flight Services family and contribute to the timely delivery of cargo shipment, luggage, business to customer delivery, and on-time flights while operating safely and securely.  We perform at the highest level for our customers every day, and strive to be an exceptional leader in our industry with our teams of cargo, passenger,...

  • Technician I, II

    1 month ago

    Salt Lake City, United States ARUP Laboratories Full time

    Schedule:7-On/7-Off A week9:00 PM - 7:30 AM Training Schedule:Tuesday - Friday (40 hrs/wk)6:00 AM – 4:30 PM Department:  Autoimmune Immunology 2 - 630 *Hourly rate is an estimate only which includes shift differential for nights, evenings, or weekend shifts. Overall hourly rates will vary based on schedule.  Primary Purpose: The Technician I ($16.17) is...

  • Technician I, II or III

    2 months ago

    Salt Lake City, United States ARUP Laboratories Full time

    Schedule:7-On/7-Off B week1:00 PM - 11:30 PM Training Schedule:Monday - Friday (40 hours)7:00 AM - 3:30 PM Department: Molecular Automated - 652 *Hourly rate is an estimate only which includes shift differential for nights, evenings, or weekend shifts. Overall hourly rates will vary based on schedule.  Primary Purpose: The Technician I ($16.17) is in...

  • Electrical Foreman

    3 months ago

    Lake Monroe, United States SST Direct Full time

    Job DescriptionJob DescriptionSeeking a n Electrical Foreman with experience in traffic signals, ITS, lighting, and signing for a direct hire opportunity with our client, an established electrical company specializing in highway lighting and traffic signalization projects.This position offers full benefits including PTO, Medical, Dental, Vision, Life...

  • CDL Driver

    2 weeks ago

    Salt Lake City, United States Newrest Full time

    ESSENTIAL FUNCTIONS• Load and unload of all equipment on trucks.• Check to ensure the correct amount of trolleys and cabinets to be delivered before loading.• Fill pre-trip inspection book & perform mandatory safety checks of the vehicle for each shift.• Ensure the loading the products into vehicles is done according to plan galley.• Ensure all...

  • Controls Technician

    2 weeks ago

    Lake Forest, United States Dynacast Full time

    Dynacast, LLC, a Form Technologies Company, is a leading global manufacturer of small, engineered precision components utilizing proprietary multi-slide die casting technology and tooling techniques. We currently have an opening for a Tool Maker on second shift in our Lake Forest, CA location. Controls Technician The Controls Technician supports all aspects...

  • Controls Technician

    4 weeks ago

    Lake Forest, United States Dynacast Full time

    Job DescriptionJob DescriptionDynacast, LLC, a Form Technologies Company, is a leading global manufacturer of small, engineered precision components utilizing proprietary multi-slide die casting technology and tooling techniques. We currently have an opening for a Tool Maker on second shift in our Lake Forest, CA location.Controls TechnicianThe Controls...