Machine Operator

2 weeks ago

Bristol, United States Berry Global Riverhead Facility Full time
Job DescriptionJob Description
  • Sign on Bonus - $1000
  • Retention Bonuses available - $500 at 90 and 180 days

Berry Global offers competitive wages and a comprehensive benefits packing including 401(k) with match, tuition assistance and a dynamic, supportive work environment. Build a career in manufacturing with Berry

Schedule: Monday - Thursday 6:30pm - 7:00am with Mandatory overtime as required.

Pay Rate: Hourly Rate is $19.50/hr + ($1.00 differential)

The Operator's main responsibility is to run the coating line's Take-Up end to produce niche, specialty tape products.

Primary Duties of the Job

  • Refer to all job-related ISO quality guidelines and customer requirements
  • Review the Work Order (including the run sheet, the material requirements, and any applicable process notes) before the run starts, and then physically check to make that the right material is on the machine and that the right side of the material is threaded to for coating or lamination.
  • Lift roll shafts manually or with the aid of material handling tools as needed throughout the shift to load, unload, and store them.
  • Throughout the run, cut and splice the material as necessary.
  • Rolls should be removed from the line and prepared for shipment to the warehouse (skid, band, etc.)
  • Utilize material handling machinery (such as pallet jacks, forklifts, drum trucks, and hoists) to transport, stage, and/or load raw materials and finished goods.
  • Equipment problems should be reported to the appropriate Group Leader and/or Supervisor, and material problems should be reported using NCR protocols.
  • Adhesive cleaning chemicals are used as needed throughout the shift during changeovers.
  • carry out additional tasks as needed and instructed

**Education, Experience, Skills**

  • Minimum High School Diploma or GED

  • Must communicate fluently in English (speaking, reading, writing)

  • Basic computer skills

  • Basic math skills

  • Basic knowledge of scan guns and/or inventory control system

  • Forklift operator experience helpful

Job & Conduct Expectations

  • Overtime when scheduled.Employee may be required to back-fill when a co-worker is on leave or absent.
  • Maintain high standards in housekeeping throughout work area and assist as required in other areas of the facility and grounds.

You should be proficient in:

  • Machine Setups for Production Runs
  • Blueprint Reading
  • Mechanical Troubleshooting Skills
  • Forklift Licensed
  • Troubleshooting CNC Machines
  • Excellent Communication Skills
  • Shop Math Skills
  • Basic Computer Skills

Machines & technologies you'll use:

  • CNC Mill (3-4 axis VMC)
  • CNC Lathe (2-4 axis)
  • Forklifts

Salary info:

$19.50 - $19.50 / hr

  • Machine Operator

    2 weeks ago

    Bristol, United States Innovative Manufacturing Solutions Full time

    Job DescriptionJob DescriptionBenefits:401(k)Health insurancePaid time off Title: Machine OperatorLocation: Bristol, PACompany: Innovative Manufacturing SolutionsAbout Us:Innovative Manufacturing Solutions is a leading provider of cutting-edge solutions in the manufacturing industry. We specialize in providing precision metal-based components and assemblies...

  • Screw Machine Operator

    1 week ago

    Bristol, United States PrideStaff Full time

    We are looking to add a Screw Machine Operator to lock manufacturing company in Bristol, CT! This is a Direct-Hire role.Pay: $35/hrHours: 6:00am-2:30pm Monday to FridaySummary:Screw machine operators will produce precision machined componentsapplying knowledge of mechanics, shop mathematics, layouts, control plans andmachining procedures.Job...

  • Machine Operator

    2 weeks ago

    Bristol, United States Complete Staffing Solutions Full time

    Job DescriptionJob DescriptionMachine OperatorLocation:Bristol, RIOpportunity to work with a great company!Multiple openings! Hiring ASAP!Hours:Full time– 60 hour mandatory work week2nd Shift: Monday – Thursday, 2:30pm – 3:00am – OT Available3rd Shift: Monday – Thursday, 6:30pm – 7:00am – OT AvailableRequirements:1-2 years of machine operating...

  • Machine Operator

    6 days ago

    Bristol, United States Complete Staffing Solutions Full time

    Job DescriptionJob DescriptionMachine OperatorLocation: Bristol, RI Hours: Full time position2nd ShiftMon - Thurs 2:30pm - 3:00am, after 2-3 months, Mon - Fri 2:30pm - 11:00pm3rd shiftMon - Thurs 6:30pm - 7:00am , after 2-3 months, Mon - Fri 10:30pm - 7:00amJob Requirements: Prior to beginning of run, review the Work Order (e.g. run sheet, material...

  • Machine Operator

    2 weeks ago

    Bristol, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Production Operator (also known as Coating Line Operator, Manufacturing Technician), your primary responsibility will be to operate the coating line's Take-Up end to produce specialty tape products. This includes adhering to ISO quality guidelines, preparing materials for coating or lamination, handling roll shafts,...

  • Lead Machine Operator

    6 days ago

    Bristol, United States Complete Staffing Solutions Full time

    Job DescriptionJob DescriptionLead Machine OperatorLocation: Bristol, RI Hours: Full time positionHours are 12pm 12am (6 months on a 12 hour shift and then will transition into an 8 hour 2nd shift) 60 hours work weekJob Requirements: The Group Leader’s primary purpose is to assure that the overall coating line runs to optimum conditions.The Group leader...

  • Skiving Operator

    4 days ago

    Bristol, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Skiving Operator (also known as Lathe Machine Operator, Production Technician), you'll be a crucial member of our operations team. Your primary responsibility will be to ensure efficient operation of our Skiving machines, meeting production requirements and customer specifications. This includes direct...

  • Machine Shop Assistant

    1 week ago

    Bristol, United States S G FRANTZ COMPANY INC Full time

    Job DescriptionJob DescriptionMachine Shop Assistant must be mechanically inclined, adaptable and quick to pick up new skills.Responsibilities:Perform machine shop support functionsParts deburring and finishingMechanical and electronic assemblyRead and interpret engineering drawingsOperate basic shop equipment​Qualifications:Mechanical aptitude &...

  • Machine Shop Assistant

    2 weeks ago

    Bristol, United States S G FRANTZ COMPANY INC Full time

    Job DescriptionJob DescriptionMachine Shop Assistant must be mechanically inclined, adaptable and quick to pick up new skills.Responsibilities:Perform machine shop support functionsParts deburring and finishingMechanical and electronic assemblyRead and interpret engineering drawingsOperate basic shop equipmentQualifications:Mechanical aptitude &...

  • Small Molded Cylinder Operator

    1 week ago

    Bristol, United States Path Engineering Full time

    Job DescriptionJob Description```RoleAs a Small Molded Cylinder Operator (also known as Machine Operator, Production Operator), you'll be a key member of our dynamic operations team. Your primary responsibility will be to ensure efficient operation of Molded Cylinder machines, meeting production requirements and customer specifications. This includes...

  • CNC Machinist 2nd Shift

    1 week ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionSummaryThe CNC Machinist works with the CNC department, under the supervision of the CNC Coordinator and Lead Programmer, to carry out required jobs on various CNC machines and equipment. These machines include both 3 and 5 axis, as well as any newly acquired machines. The CNC Machinist will setup, operate, and assist with maintenance of the...

  • CNC Programmer

    2 weeks ago

    Bristol, United States Tecomet, Inc. Full time

    Job DescriptionJob DescriptionCNC Programmer Build innovative solutions and design the future. You can pursue your potential at Tecomet by working with a dedicated team to solve complex challenges, in partnership with industry-leading clients in medical device technology, aerospace, and defense industries. With the backing of our steadfast brand, you can be...

  • CNC Programmer

    7 days ago

    Bristol, United States Tecomet, Inc. Full time

    Job DescriptionJob DescriptionCNC Programmer Build innovative solutions and design the future. You can pursue your potential at Tecomet by working with a dedicated team to solve complex challenges, in partnership with industry-leading clients in medical device technology, aerospace, and defense industries. With the backing of our steadfast brand, you can be...

  • CNC Machinist 3rd Shift

    7 days ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionJob DescriptionSummaryThe CNC Machinist works with the CNC department, under the supervision of the CNC Coordinator and Lead Programmer, to carry out required jobs on various CNC machines and equipment. These machines include both 3 and 5 axis, as well as any newly acquired machines. The CNC Machinist will setup, operate, and...

  • CNC Machinist 2nd Shift

    2 weeks ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionJob DescriptionSummaryThe CNC Machinist works with the CNC department, under the supervision of the CNC Coordinator and Lead Programmer, to carry out required jobs on various CNC machines and equipment. These machines include both 3 and 5 axis, as well as any newly acquired machines. The CNC Machinist will setup, operate, and...

  • CNC Machinist 3rd Shift

    2 weeks ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionJob DescriptionSummaryThe CNC Machinist works with the CNC department, under the supervision of the CNC Coordinator and Lead Programmer, to carry out required jobs on various CNC machines and equipment. These machines include both 3 and 5 axis, as well as any newly acquired machines. The CNC Machinist will setup, operate, and...

  • CNC Machinist 2nd Shift

    7 days ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionJob DescriptionSummaryThe CNC Machinist works with the CNC department, under the supervision of the CNC Coordinator and Lead Programmer, to carry out required jobs on various CNC machines and equipment. These machines include both 3 and 5 axis, as well as any newly acquired machines. The CNC Machinist will setup, operate, and...

  • Multi-Axis CNC Programmer

    2 weeks ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionSummaryThe Multi-Axis CNC Programmer works within the CNC function of CET's Production Department. This position reports to the CNC Coordinator and Lead Programmer and their primary function is to use MasterCAM to program large format 5 axis CNC machine, lathe and provide support to the 3 axis machines.About CETCET is an...

  • Multi-Axis CNC Programmer

    2 weeks ago

    Bristol, United States Composite Energy Technologies Inc Full time

    Job DescriptionJob DescriptionSummaryThe Multi-Axis CNC Programmer works within the CNC function of CET's Production Department. This position reports to the CNC Coordinator and Lead Programmer and their primary function is to use MasterCAM to program large format 5 axis CNC machine, lathe and provide support to the 3 axis machines.About CETCET is an...

  • Coiler

    2 weeks ago

    Bristol, United States Lee Spring Company Full time

    Job DescriptionJob DescriptionLee Spring is seeking and experienced Coiler to join our team.About us:Lee Spring manufactures and distributes mechanical springs, wire forms, stampings and fourslide parts worldwide. We offer an extensive product line of more than 25,000 inventoried products in a variety of materials available in stock and ready to ship today....