1st Shift CNC Machinist

3 weeks ago

Santa Fe Springs, United States FLAG Solutions LLC Full time
Job DescriptionJob Description1st Shift Hours:6:00am-2:30pmJOB DESCRIPTION SUMMARY:
This job involves machining of metal components, composites and assemblies.DUTIES INCLUDE:
  • Machine composites and metal parts for the Aerospace industry
  • Perform regular machine shop duties
  • Machine components to within specified tolerances
  • Operate a wide variety of both machines and hand tools to perform duties as assigned
  • Set-ups and operate CNC Lathes / Mills / 5 Axis
  • Participate in corrective actions process to prevent defect, downtime and production stops
  • Analyze and diagnose machining and tooling problems
REQUIRED KNOWLEDGE AND SKILLS:
  • Aerospace Machinist with CNC set-up and operation experience
  • Experience with composite machining preferred
  • Experience with Hyundai, OKK, Okuma, Mori Seiki and HAAS Lathes and Mills
  • Experience with Fanuc, Mitsubishi, Neomatic 635 controls preferred
  • Ability to read and interpret complex blue prints and procedures
  • Ability to detect tool wear, set-up of new tools
  • Knowledge of proper use of dimensional measuring instruments
  • Knowledge of all applicable hand tools and use of same
REQUIRED EXPERIENCE AND EDUCATION:
  • Advance knowledge of math and trigonometry
  • Ability to work safely throughout our manufacturing facilities
  • Minimum 3-5 years machine shop experience in a manufacturing and / or aerospace environment; and
  • High School Diploma or GED with subsequent course work in relevant training desired
PHYSICAL REQUIREMENTS:
  • Ability to work safely throughout our manufacturing facilities.
  • Lift/move up to 40 lbs. without assistance; or greater than 40 lbs. with assistance from another person or with appropriate lift/move apparatus.
  • Sit, stand, bend, stoop, reach, push, and pull as needed for duration of work shift.
  • Able to work effectively under pressure of deadlines.
  • Able to work full time, at least 8 hours a day and 5 days a week.
  • Good vision required (with or without corrective lenses).
ITAR REQUIREMENT:
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individuals as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.#ZRCompany DescriptionGreat long term opportunity to join a great HR teamCompany DescriptionGreat long term opportunity to join a great HR team

  • 1st Shift CNC Machinist

    3 weeks ago

    Santa Fe Springs, United States Flag Solutions Full time

    Job DescriptionJob Description1st Shift Hours:6:00am-2:30pmJOB DESCRIPTION SUMMARY: This job involves machining of metal components, composites and assemblies.DUTIES INCLUDE: Machine composites and metal parts for the Aerospace industry Perform regular machine shop duties Machine components to within specified tolerances Operate a wide variety of both...

  • 1st Shift CNC Machinist

    3 weeks ago

    Santa Fe Springs, United States FLAG Solutions LLC Full time

    Job DescriptionJob Description1st Shift Hours:6:00am-2:30pmJOB DESCRIPTION SUMMARY: This job involves machining of metal components, composites and assemblies.DUTIES INCLUDE: Machine composites and metal parts for the Aerospace industry Perform regular machine shop duties Machine components to within specified tolerances Operate a wide variety of both...

  • 1st Shift CNC Machinist

    16 hours ago

    Rancho Santa Margarita, United States Aerotek Full time

    **Job Title: 1st Shift CNC Machinist** **Job Description** We are seeking a competent 1st Shift CNC Machinist for our machine shop in Rancho Santa Margarita, CA. The successful candidate will work on first shift (6am-2:30pm) and will be responsible for setting up and operating CNC machines, such as lathes and mills, to cut, shape, or form metal work pieces...

  • Motorsport CNC Mastercam Machinist

    1 month ago

    Santa Clarita, United States PDS Tech, Inc. Full time

    PDS TECH Commercial, Inc is looking for a Motorsport CNC Mastercam Machinist for our client in Santa Clarita, CA Job Title: CNC Mastercam Machinist Job Type: Full Time; Contract Location: Santa Clarita, CA Shift: 1st shift, 7 am to 5 pm Pay Rate: $25 CNC, Motors, Machinist, Motor, Staffing

  • Motorsport CNC Mastercam Machinist

    1 month ago

    Santa Clarita, United States PDS Tech Full time

    PDS TECH Commercial, Inc is looking for a Motorsport CNC Mastercam Machinist for our client in Santa Clarita, CA Job Title: CNC Mastercam Machinist Job Type: Full Time; Contract Location: Santa Clarita, CA Shift: 1st shift, 7 am to 5 pm Pay Rate: $25 CNC, Motors, Machinist, Motor, Staffing

  • CNC Machinist

    2 weeks ago

    Santa Fe Springs, United States RBC Bearings Incorporated Full time $18 - $24

    DESCRIPTION:2nd shift hours are Monday afternoon - Friday morning 3pm – 11:30pmJOB TITLE/LOCATION: CNC Machinist - 2nd Shift Pay Range: $18-$24 the hour- DEPENDS ON EXPERIENCE.ESSENTIAL FUNCTIONS OF THE JOB:Operate CNC machines and inspect partsDepending on experience trouble shooting, completing setupsDaily use of hand tools including pneumatic assembly...

  • CNC Operator Machinist

    1 week ago

    Santa Fe Springs, United States Frontline Resources LLC Full time

    Job DescriptionJob DescriptionJob Summary:Learn from Lead Machinist: Must have teachable attitude. The CNC Setup Technician is responsible for setting up, and operating CNC machines to manufacture precision parts and components according to specifications. This role requires basic technical skills, attention to detail, and the ability to work efficiently in...

  • CNC Swiss Lathe Machinist

    3 weeks ago

    Santa Fe Springs, United States VITESSE Recruiting & Staffing Full time

    Job DescriptionJob DescriptionIMMEDIATE job opportunities for a driven individual who has a proven track record of performance and desire to work for a well-established organization. We are looking for an experienced CNC Swiss Lathe Machinist for one of the top suppliers of bushings in the aerospace industry located in Santa Fe Springs, CA.  Direct Hire...

  • CNC Swiss Lathe Machinist

    4 weeks ago

    Santa Fe Springs, United States VITESSE Recruiting & Staffing Full time

    Job DescriptionJob DescriptionIMMEDIATE job opportunities for a driven individual who has a proven track record of performance and desire to work for a well-established organization. We are looking for an experienced CNC Swiss Lathe Machinist for one of the top suppliers of bushings in the aerospace industry located in Santa Fe Springs, CA.  Direct Hire...

  • CNC Machinist

    4 days ago

    Santa Ana, United States Aerotek Full time

    **Job Title: 2nd & 3rd Shift CNC Machinist** **Job Description** Seeking CNC Machinists for 2nd & 3rd shift at our large machine shop in Santa Ana, CA. This role offers a competitive hourly rate between $25-$28, with overtime opportunities. The CNC Machinist will be responsible for setting up and operating various CNC mills, lathes, and manual machines to...

  • 3rd Shift CNC Machinist

    3 weeks ago

    Santa Ana, United States Aerotek Full time

    **Job Title: 3rd Shift CNC Machinist** **Job Description** Seeking three skilled CNC Machinists for the 3rd shift (9:00pm-5:30am) at our large machine shop in Santa Ana, CA. This role offers a competitive hourly rate between $25-$35, with overtime opportunities. The CNC Machinist will be responsible for setting up and operating various CNC mills, lathes, and...

  • 3rd Shift CNC Machinist

    5 days ago

    Santa Ana, United States Aerotek Full time

    **Job Title: 2nd & 3rd Shift CNC Machinist** **Job Description** Seeking CNC Machinists for 2nd & 3rd shift at our large machine shop in Santa Ana, CA. This role offers a competitive hourly rate between $25-$35, with overtime opportunities. The CNC Machinist will be responsible for setting up and operating various CNC mills, lathes, and manual machines to...

  • 2nd shift CNC Swiss Machinist

    3 weeks ago

    Colorado Springs, Colorado, United States Volt Full time

    Come create your career with Volt Volt is immediately hiring for CNC Machinists in Colorado Springs, CO. As a CNC Machinist you will:Set up, program, and operate CNC Swiss machines Perform setups, changeovers, and tool offsets on multiple CNC Swiss machines Inspects and measures micro parts Maintain proper condition of measuring instruments Maintain proper...

  • 1st Shift CNC Machinist

    3 weeks ago

    Rancho Santa Margarita, California, United States Aerotek Full time

    :First shift (6am-2:30pm) CNC Setup Machinist needed for machine shop in Rancho Santa Margarita, CA. Pay will be between $35-$55 an hour in pay with OT available as well. Pay is based on experience. Ideally looking for candidates with Okuma Lathe experience (setup and operate).Will set up and operate CNC machines, such as lathes and mills, to cut, shape, or...

  • CNC Machinist

    1 month ago

    Santa Clarita, United States Two Roads Professional Resources Full time

    We have an immediate need for a CNC Machinist for a top motorsports company. The qualified candidate will have 3 years of experience with CNC machining centers to manufacture components. Experience with Fanuc controllers required. Strong understandin CNC Machinist, CNC, Machinist, Manufacturing, Staffing

  • 3rd Shift CNC Machinist

    4 weeks ago

    Santa Ana, United States Aerotek Full time

    **Description:**Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment.Essential Duties And ResponsibilitiesSet-up CNC...

  • 3rd Shift CNC Machinist

    1 month ago

    Santa Ana, United States Aerotek Full time

    **_3RD SHIFT CNC MACHINSTS NEEDED!!_** **_INTERVIEW & START RIGHT AWAY!_** **Description:** Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a...

  • 3rd Shift CNC Machinist

    3 weeks ago

    Santa Ana, California, United States Aerotek Full time

    **_3RD SHIFT CNC MACHINSTS NEEDED_** **_INTERVIEW & START RIGHT AWAY_** **Description:** Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a...

  • 3rd Shift CNC Machinist

    3 weeks ago

    Santa Ana, California, United States Aerotek Full time

    Description:Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment.Essential Duties And ResponsibilitiesSet-up CNC lathes,...

  • 3rd Shift CNC Machinist

    4 weeks ago

    Santa Ana, United States Aerotek Full time

    Description: Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment. Essential Duties And Responsibilities Set-up CNC...