6201 Quality Control Technician

2 weeks ago

Mount Olive, United States Mt Olive Pickle Company Full time
Job DescriptionJob DescriptionDescription:

Summary

Performs Quality Control inspections in assigned work area. Collects and tests samples, documents results and reports deviations from standards based on Quality Control specifications. Verifies products meet Hazard Analysis Critical Control Points (HACCP) critical limits and Critical Quality(CQ) limits.

Duties and Responsibilities

Essential Functions

Note: Quality Control Technicians are assigned to work in different areas based on production schedule . They must be able to perform the duties in each area. The absence of any QC Technician performing HACCP or CQP monitoring must be covered by another QC technician or individual trained to monitor HACCP critical limits or CQP’s.

  • Completes routine chemical analysis on samples of syrups and brines, raw ingredients, in-process samples, and finished product.
  • Evaluates product for physical defects and verifies the defects do not exceed the specification limits.
  • Performs pH analysis on in-process and equilibrated samples. Verifies all samples meet the HACCP critical limit for pH. Calibrates the pH meter as required.
  • Thru measurement or by using good judgment, verifies that product being produced meets expected specifications pertaining to appearance, volume, spice additions, and other parameters.
  • Performs various tests on caps to meet established parameters.
  • Calibrates thermometers for production.
  • Perform Glass Breakage inspection on the production lines in the event of a glass break
  • Performs checks to verify blancher temperatures and salt content.
  • Inspects finished product packaging for defects including incorrect code dates or product codes, incorrect label usage, capping problems, label defects, or product defects.
  • Follows established procedures for placing product on hold (red carding).
  • Monitors CQP’s (Critical Quality Points) and take appropriate action when outside the control limits.
  • Verifies all testing results are within specification and take appropriate action when samples are outside the acceptable ranges.
  • Performs taste tests on finished product samples.
  • Completes necessary paperwork for quality control and operations based on scheduled production.
  • Enter in-process and Finished product data in our PreSage data system
  • Maintains and evaluates quality control fermentation samples.
  • Effectively communicates problems to manufacturing and quality control management.
  • Must have the ability to work effectively within a team environment and cover any area of the department as needed.
  • Keeps work area clean and neat.
  • Follows safety rules and company policies
  • Other Duties
  • Participates in training, employee meetings, committees, project teams, etc. as appropriate.

Other Duties

  • Participates in training, employee meetings, committees, project teams, etc. as appropriate.
  • Receives written and verbal instructions on the above job tasks and performs other duties as directed by Supervisor.

Benefits:

401(k)

401(k) matching

Profit Sharing

Dental Insurance

Employee Discount

Flexible spending account

Health Insurance

Life Insurance

Paid Time-Off

Referral Program

Vision Insurance


Mt. Olive Pickle Co., Inc. is an Affirmative Action / Equal Employment Opportunity Employer including Veterans and Disabilities.

Requirements:

Knowledge, Skills and Abilities

High school graduate plus additional training needed. Ability to read, write and speak in English required. Math skills including addition, subtraction, multiplication, division and fractions needed for job tasks. Must have the ability to follow directions and complete special tasks or projects as instructed by management.

Supervisory Responsibilities

None

Machines, Equipment, Tools Used

Scales, vacuum gauge, thermometer, salometer, baume' scale, refractometer, ruler, pH meter, graduated cylinders, pans, strainer, knife, spatula, and calculator.

Physical Demands

  • Stooping: Bending body downward and forward by bending spine at waist. This factor is important if it occurs to a considerate degree and requires full use of the lower extremities and back muscles.
  • Reaching: Extending hand(s) and arm(s) in any direction.
  • Standing: Particularly for sustained periods of time.
  • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another.
  • Lifting: Raising objects from a lower to a high position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles.
  • Grasping: Applying pressure to an object with the fingers and palm.
  • Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly.
  • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make fine discriminations in sound.
  • Medium Work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.
  • The worker is required to have close visual acuity to perform and activity such as: preparing and analyzing data and figures: transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices, and/or assembly or fabrication of parts at distances close to the eyes.

Work Environment

Works inside, subject to moderate seasonal temperature variations and frequent wetting of feet from some job tasks. Fumes from forklifts, welding, hot pepper, onions, chemicals and product ingredients. Some contact with brine, grease, rust, dust, ink, yellow food coloring and Q C chemicals. Earplugs, gloves, smocks, and safety glasses required in some areas. Head cover and beard cover required. Some contact with steam from cappers and pasteurizers.

Disclaimer: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.



  • Quality Control Technician

    1 week ago

    Mount Olive, United States Jobot Full time

    Global Ingredient Company / TOP PAY $$$ / 100% Paid BenefitsThis Jobot Job is hosted by: Adrian MartinezAre you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $26 - $31 per hourA bit about us:Based in Budd Lake, NJ, we are seeking a QC Technician to join our growing team.. This is a fantastic opportunity to apply...

  • VAS Quality Control Assembler

    3 weeks ago

    Olive Branch, United States Nortek Control LLC Full time

    ** VAS Quality Control Assembler** **Job Category****:** Manufacturing **Requisition Number****:** VASQU02078 Showing 1 location **Job Details** **Description** The VAS Quality Control Assembler performs a number of tasks in the assembly area supporting internal and external customer requirements. Tasks include but are not limited to repetitive and...

  • VAS Quality Control Assembler

    2 weeks ago

    Olive Branch, United States Nortek Control LLC Full time

    ** VAS Quality Control Assembler** **Job Category****:** Manufacturing **Requisition Number****:** VASQU02078 Showing 1 location **Job Details** **Description** The VAS Quality Control Assembler performs a number of tasks in the assembly area supporting internal and external customer requirements. Tasks include but are not limited to repetitive and...

  • Quality Control Lab Technician

    3 weeks ago

    Mount Bethel, United States Air Liquide Full time

    The science of electronics is transforming exponentially through innovation and connectivity around the planet. Every day, breakthroughs are making technologies - from micro-processors, memory chips and flat panels to photovoltaic cells - even smaller and more powerful, opening up countless new possibilities in how the world lives, works and connects. Air...

  • 5005 Automation Controls Technician

    2 weeks ago

    Mount Olive, United States Mt Olive Pickle Company Full time

    Job DescriptionJob DescriptionDescription:SummaryThe Automation Technician will perform typical to advanced programming, troubleshooting, calibration and optimization on electrical, mechanical and pneumatic systems. The skill level for this position requires an individual to work independently on complicated equipment and systems with minimal instruction and...

  • 5005 Automation Controls Technician

    2 months ago

    Mount Olive, United States Mt Olive Pickle Company Full time

    Job DescriptionJob DescriptionDescription:SummaryThe Automation Technician will perform typical to advanced programming, troubleshooting, calibration and optimization on electrical, mechanical and pneumatic systems. The skill level for this position requires an individual to work independently on complicated equipment and systems with minimal instruction and...

  • Quality Control Technician

    3 weeks ago

    Mount Vernon, United States NRGUSA Full time

    Job DescriptionJob DescriptionNRGUSA is hiring immediately for a Direct Hire Quality Control Technician to work with a large food manufacture in an onsite role. Responsible for safety and quality activities to assure products are within customer specifications and meet food safety requirements. Activities include testing and verification, sanitation and GMP...

  • Pest Control Technician

    2 months ago

    Mount Holly, United States A to Z Pest Control Full time

    Job DescriptionJob DescriptionA to Z Pest ControlWant to be challenged every day? Want that accomplished feeling at the end of each day? A to Z Pest Control is a family-feel growth focused pest management company and we are looking for motivated and career minded individuals to join our growing team. We take pride in delivering best-in-class service to each...

  • Quality Technician

    2 months ago

    Mount Vernon, United States US Nameplate Company Full time

    Job DescriptionJob DescriptionSalary: Quality Assurance Technician Company: U.S. Nameplate Co. About Us: U.S. Nameplate Co. is a leading manufacturer of high-quality nameplates, labels, and identification products. With a commitment to excellence and innovation, we serve a diverse range of industries including automotive, medical, electronics, and more....

  • Control Technician

    2 weeks ago

    Mount Pleasant, United States Venteon Full time

    Company: Tier 1 automotive supplier Location: Mt. Pleasant, IA Title: Controls Technician Compensation: $72-80k base salary / OT Eligible Hours: 1st Shift position / 8hr days M-Fr (Flexible start time between 5a-8a)Working Arrangement: In-OfficePosition Description Fixes technical problems by applying principles and theories of electronics, electrical...

  • Control Technician

    3 weeks ago

    Mount Pleasant, United States Venteon Full time

    Company: Tier 1 automotive supplier Location: Mt. Pleasant, IA Title: Controls Technician Compensation: $72-80k base salary / OT Eligible Hours: 1st Shift position / 8hr days M-Fr (Flexible start time between 5a-8a)Working Arrangement: In-OfficePosition Description Fixes technical problems by applying principles and theories of electronics, electrical...

  • Quality Engineer

    4 weeks ago

    Mount Olive, United States Katalyst HealthCares & Life Sciences Full time

    Responsibilities: Support validation process through protocol drafting, approval and execution and providing validation training and guidance Chair Process Change Review Board and participate in Validation Review Board meetings Participate in Design Transfer/Change Control projects as the Quality Assurance Core Team Lead Lead improvement...

  • Quality Control Inspector

    2 months ago

    Olive Branch, United States Openwork Full time $16 - $18

    Quality Control Inspector - Levels I, II, and IIIResponsibilities:Perform product and quality process inspections based on assigned tasks.Record inspection findings accurately in reports, logs, and the quality database.Participate in daily team meetings for the designated area.Report any issues to the assigned lead or supervisor promptly.Conduct daily audits...

  • HVAC Controls Technician

    2 months ago

    Mount Airy, United States WorkForce Unlimited, LLC Full time

    We are seeking a highly driven, experienced HVAC Controls Technician. This job involves travel within NC, SC, VA, & GA. Room and board is covered. Controls Technician, Technician, HVAC, Controls, Manufacturing, Staffing

  • Automation Controls Engineer

    4 days ago

    Mount Olive, United States Nationwide Technical & Executive Search Full time

    Automation Controls EngineerFlanders, NJOnsite, Permanent, Full BenefitsRelecation Assistance availableAs an Automation & Controls Engineer, you will utilize your technical and communication skills to design, install and troubleshoot operations systems and equipment, develop and install new production processes, and participate in overall improvement...

  • Apparel Quality Control Inspector

    3 weeks ago

    Mount Vernon, New York, United States Rails Full time

    Rails, a global contemporary apparel and lifestyle company, is seeking a Quality Control Inspector to examine product, identify and document defects, and communicate with relevant teams to ensure defective product is appropriately handled.Key Responsibilities:Assist technicians in checking sample specifications and construction to identify flawsTake a...

  • Automation Controls Engineer

    2 months ago

    Mount Olive, United States Benjamin Moore & Co Full time

    Automation Controls Engineer ID 2024-1414 Category Engineering Position Type Salaried Remote No Shift Time 8am-5pm Location Flanders, New Jersey Overview At Benjamin Moore, we empower our team members to achieve their goals and make a positive impact in our communities. We offer a rewarding and inspiring work environment that...

  • Electronics & Instrumentation Controls Technician

    2 months ago

    Mount Pleasant, United States Continental AG Full time

    Fixes technical problems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Provide assistance in troubleshooting problem equipment within the Maintenance Controls Technician, Controls, Electronics, Plant Technician, Instrument, Technician, Manufacturing,...

  • Quality Control Inspector

    1 month ago

    Mount Laurel, United States Bright Lights USA Full time

    Job DescriptionJob DescriptionPosition: QUALITY CONTROL INSPECTOR Reports To: MANAGER, QUALITY CONTROL Department: QUALITY CONTROL Supervises: Individual Contributor Classification: Non-Exempt Salary: $DOE Employment type: Full Time Schedule: 6:00 – 3:00/ Sat OT by Invitation Job Summary: Under the general direction of the Quality Control Manager, the...

  • Quality Technician

    4 weeks ago

    Mount Pleasant, United States Foxconn Industrial Internet Full time

    Foxconn Wisconsin is seeking a **Quality Technician** that will work as part of the quality team to deliver quality improvement projects and change initiatives. Once a part of the team, you will be responsible for a wide variety of tasks within the quality department in a production environment and have the opportunity to display critical thinking skills to...