CNC Mill Machinist

2 weeks ago

Denver, United States CMG - Corporate Office Full time
Job DescriptionJob Description

POSITION SUMMARY: Operates Computer Numerical Control (CNC) machines to perform various functions, such as drilling, milling, turning, reaming, boring, and tapping of metallic and nonmetallic work pieces, utilizing knowledge of machine tool capabilities and shop math. This is a mid-level position involving complete part management, running/operating of manual or CNC machines, and demonstrating progressive growth toward increasingly complex setups, troubleshooting, and higher operating proficiencies.

ESSENTIAL JOB FUNCTIONS:

· Follows all safety protocols, helps others follow all safety protocols and alerts their supervisor or management to any safety risks that are discovered. Strives to prevent accidents and OSHA recordable incidents.

· Sets up vertical machining centers by using indicators, edge finders, knowledge of tool touch-off, and common machining practices.

· Perform some setups independently, subject to supervisor verification and consultation.

· Reads and interprets drawings, process sheets, sketches, and related technical data to operate computer numerical controlled machines.

· Operates machine and monitors displays and machine operation to detect malfunctions. Stops machine to change or clean cutting tools according to required machining sequence or to measure parts for conformance to drawing specifications using precision measuring instruments.

· Utilizes their own tools in performing the job duties, continues to build toolset over time.

· Enters commands or manually adjusts machine controls to correct malfunctions or out-of-tolerance machining. Works largely independently, but sometimes discusses out-of-tolerance parts with supervisor or programming personnel to resolve problems.

· Cleans machine, chip trays, tooling, and parts and maintains lubricant and coolant fluid levels in the machine. Notifies supervisor if machine needs maintenance.

· Communicates with co-workers and supervisor to receive instructions and coordinate activities.

· Understands Chiperator practices; operates safely and cleans the equipment after use.

· Understands basic SmartSkim procedures and coolant processes, including, but not limited to, proper disposal of skimmer waste and other processing fluids.

· Inspects and measures parts to maintain part tolerance during the run cycle.

· Visually inspects each part as it is placed in the machine to check that previous operations have been correctly completed.

· While in operation, removes burrs from parts if necessary as they are needed/completed.

· Often times operates more than one machine at a time.

· Works independently, but as part of a team, with minimal oversight.

· Attends work in person, on time, on a regular and reliable basis.

· Completes all tasks in an accurate, complete and timely manner. Is detail oriented.

· Follows directions. Asks questions to clarify if needs more information.

JOB QUALIFICATION REQUIREMENTS:

· Training and Experience: 2 years or more of trade school, vocational education, work experience, or apprenticeship.

· Machining Practices. Mechanically inclined. Knowledge of standard machining tools (including drills, endmills, taps, indicators, edge finders, etc.) and practices (including tool touch-offs). Must demonstrate an advanced level of proficiency in running machines.

· Quality Control. Knowledge and ability to use common quality control techniques and instruments to inspect work pieces to a blue print.

· Reading and Comprehension: Ability to interpret and understand instructions furnished in written, oral, diagram, blue print, or schedule form, safety rules, operating and maintenance instructions, drawings, set up sheets, process sheets, etc.

· Math Ability: Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, fractions and decimals. Understanding of trigonometry for machinists.

· Computer Skills: Ability to enter and retrieve data relevant to job function from computer using ERP system and other software.

· Reasoning Ability: Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists.

· Physical Demands: The employee is required to:

- lift up to 60 pounds on a regular basis,

- lean into a standard vertical machining center or lathe to load fixtures and load and unload parts throughout the shift,

- stand, walk, push, pull, reach overhead, and bend to the floor,

- exert 20 to 60 pounds of force occasionally,

- exert 10 to 25 pounds of force frequently,

- exert up to 10 pounds of force constantly to move objects,

- work in sometimes awkward positions

· Visual Acuity: Ability to read information from blueprints, computer screen, and precision measuring instruments used in the inspection of parts.

· Communication: Ability to understand and be understood in communications with others.

· Monitoring: Ability to monitor machine sounds to identify and diagnose changes in order to take appropriate action.

  • 1st Shift

    4 weeks ago

    Denver, United States Cannonball Recruiting LLC Full time

    Job DescriptionJob DescriptionCNC Machinist/ProgrammerPay: $25-30/hr.1st Shift: Monday-Friday (6am to 2pm)Summary:The CNC Machinist/Programmer will be responsible to set-up and run mills/lathes including both manual and CNC controlled machines as well as programming CNC Machines.Qualifications:High school Diploma or equivalent1+ years of Machining...

  • 1st Shift

    2 weeks ago

    Denver, United States Cannonball Recruiting LLC Full time

    Job DescriptionJob DescriptionCNC Machinist/ProgrammerPay: $25-30/hr.1st Shift: Monday-Friday (6am to 2pm)Summary:The CNC Machinist/Programmer will be responsible to set-up and run mills/lathes including both manual and CNC controlled machines as well as programming CNC Machines.Qualifications:High school Diploma or equivalent1+ years of Machining...

  • 1st Shift

    4 weeks ago

    Denver, United States Cannonball Recruiting LLC Full time

    Job DescriptionJob DescriptionCNC Machinist/ProgrammerPay: $25-30/hr.1st Shift: Monday-Friday (6am to 2pm)Summary:The CNC Machinist/Programmer will be responsible to set-up and run mills/lathes including both manual and CNC controlled machines as well as programming CNC Machines.Qualifications:High school Diploma or equivalent1+ years of Machining...

  • CNC Machinist

    1 month ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Machinist

    4 weeks ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Machinist

    2 weeks ago

    Denver, Colorado, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and independently...

  • CNC Machinist

    4 weeks ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Machinist

    1 month ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Machinist

    1 month ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Machinist

    4 weeks ago

    Denver, United States A & L Machining Inc Full time

    CNC Lathe Setup Machinist A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals to work within a team-oriented, supportive work environment. Position Summary We are seeking an experienced lathe machinist who is able to competently and...

  • CNC Lathe Machinist

    3 weeks ago

    Denver, United States CMG - Corporate Office Full time

    Job DescriptionJob DescriptionLevel 2 CNC Lathe MachinistSecond Shift M-TH 2:00PM – 12:30AMESSENTIAL RESPONSIBILTIES AND DUTIES·        Read and understand Blue Prints/Customerdrawings, set-up and process sheets, sketches and related technical data todetermine tooling requirements, set-up procedures, controller settings, feedsand speeds, and...

  • Cnc Machinist

    2 days ago

    Denver, United States Bronwick LLC Full time

    Join Our Team as a CNC/Sawjet Operator! Are you skilled in operating CNC and Bridge saw machines? Do you have a passion for crafting custom countertops with natural stone materials like granite, marble, and quartz? Look no further! Our premier custom countertop company is seeking talented individuals like you to join our rapidly growing team. Why Work With...

  • Machinist CNC

    4 weeks ago

    Denver, United States ADVANCED MACHINE & FABRICATION INC Full time

    Job DescriptionJob DescriptionPosition Summary QualificationsMinimum of 7-10 years experience with independent programming, setup and operation of 2, 3 and 4 axis CNC machines, and part inspection. Experience in managing production schedules, workflow, equipment maintenance, and safety issues. General AccountabilitiesSet up and operate CNC machinesPerform...

  • Machinist CNC

    1 month ago

    Denver, United States ADVANCED MACHINE & FABRICATION INC Full time

    Job DescriptionJob DescriptionPosition Summary QualificationsMinimum of 7-10 years experience with independent programming, setup and operation of 2, 3 and 4 axis CNC machines, and part inspection. Experience in managing production schedules, workflow, equipment maintenance, and safety issues. General AccountabilitiesSet up and operate CNC machinesPerform...

  • Machinist CNC

    1 week ago

    Denver, United States ADVANCED MACHINE & FABRICATION INC Full time

    Job DescriptionJob DescriptionPosition Summary QualificationsMinimum of 7-10 years experience with independent programming, setup and operation of 2, 3 and 4 axis CNC machines, and part inspection. Experience in managing production schedules, workflow, equipment maintenance, and safety issues. General AccountabilitiesSet up and operate CNC machinesPerform...

  • Machinist CNC

    4 weeks ago

    Denver, United States ADVANCED MACHINE & FABRICATION INC Full time

    Job DescriptionJob DescriptionPosition Summary QualificationsMinimum of 7-10 years experience with independent programming, setup and operation of 2, 3 and 4 axis CNC machines, and part inspection. Experience in managing production schedules, workflow, equipment maintenance, and safety issues. General AccountabilitiesSet up and operate CNC machinesPerform...

  • Cnc Machinist

    5 days ago

    Denver, United States Bronwick Recruiting and Staffing Full time

    Job DescriptionJob DescriptionJoin Our Team as a CNC/Sawjet Operator!Are you skilled in operating CNC and Bridge saw machines? Do you have a passion for crafting custom countertops with natural stone materials like granite, marble, and quartz? Look no further! Our premier custom countertop company is seeking talented individuals like you to join our rapidly...

  • CNC Machine Operator

    1 month ago

    Denver, United States A & L Machining Inc Full time

    A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals seeking a team-oriented, supportive work environment. Description: Single function machine operator position. This position will work Monday-Thursday from 6:20am-4:50pm on a single machine...

  • CNC Machine Operator

    4 weeks ago

    Denver, United States A & L Machining Inc Full time

    A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals seeking a team-oriented, supportive work environment. Description: Single function machine operator position. This position will work Monday-Thursday from 6:20am-4:50pm on a single machine...

  • CNC Machine Operator

    4 weeks ago

    Denver, United States A & L Machining Inc Full time

    A&L Machining is a high-production precision CNC machine shop with decades of experience. Our operation is growing, and we are seeking highly motivated individuals seeking a team-oriented, supportive work environment. Description: Single function machine operator position. This position will work Monday-Thursday from 6:20am-4:50pm on a single machine...