Manufacturing Tech III

3 weeks ago

Saint Petersburg, United States Plasma-Therm LLC Full time
Job DescriptionJob DescriptionDescription:

Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results.


DUTIES AND RESPONSIBILITIES:

NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with limited or no direct supervision.

  • Facilitate equipment applying water, electrical power and leveling machinery in temporary installation.
  • Position and assembles complex Electro/mechanical parts and assemblies part according to blueprints, schematics and/or standard procedures using hand tools.
  • Performs complex mechanical alignments and calibration of equipment to the quality standards of ATP (Acceptance Test Procedure) and other procedures that are used during the test cycle of the products.
  • Performs and verifies others leak checks on vacuum and mechanical assemblies using leak detection systems.
  • The ability to operate and demonstrates the proper usage of impedance meters and other specialized electronic test equipment.
  • Debugs equipment, including electrical, RF, mechanical, and vacuum systems, to facilitate power-up and gathering of test data. Records and reports test data.
  • Maintain Class 10,000 through 100 clean room requirements.
  • Provides guidance and training for other technicians to the quality standards specified on procedures and the ATP.
  • Corresponds and works with Engineering, Planning and other departments on prototype systems.
  • Writes and develops procedures for others technicians to follow.
  • Prepare systems for shipment, including cleaning, break down, preparation of miscellaneous list, and interface with Shipping.
  • It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality and Environmental Process of Plasma-Therm LLC.

SUPERVISORY RESPONSIBILITIES: None.

Requirements:
  • Associate’s Degree (A.S.) from two-year college or technical school or military training.
  • Two or more years of directly related experience as a test technician.

SKILLS AND ABILITIES:

  • Ability to interpret blueprints drawings, schematics, technical procedures, and other related material.
  • Troubleshoot using DMM, O-scope, Ohm Megger and other measuring equipment.
  • Ability to read, interprets, and follows safety rules, operating and maintenance instructions, and procedure manuals.
  • Ability to apply basic mathematical skills to solve technical problems.
  • Proficient in use of crimpers, torque wrenches, vacuum leak detectors, soldering iron, and other assembly/test hand tools.
  • Working knowledge of Windows Office.
  • Ability to work independently with little or no direct supervision.
  • Ability to adapt to a changing schedule.

WORK ENVIRONMENT and PHYSICAL DEMANDS:

  • The normal work environment is typical of manufacturing clean room facility and support areas such as stockroom, machine shop, and laboratory.
  • The incumbent is routinely required to sit, stand, walk, stoop, kneel, touch, see, and hear, and may be required to lift or move up to 50 pounds.
  • While performing the regular duties of the position, the incumbent is regularly exposed to moving mechanical parts, risk of electrical shock, and possible exposure to toxic or caustic chemicals. The incumbent must be able to wear safety equipment and follow safety instructions.

Plasma-Therm, LLC. is an equal employment opportunity employer, in accordance with applicable federal and state law for qualified employees and applicants without regard to race, religion, color, sex, age, national origin, sexual orientation, marital status, genetic information, or physical or mental disability, and, when requested and necessary, to provide reasonable accommodations for qualified individuals with disabilities. Qualified disabled veterans and veterans of the Vietnam era are also included under this policy.

  • Manufacturing Tech III

    2 months ago

    Saint Petersburg, United States Plasma-Therm LLC Full time

    Job DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...

  • Manufacturing Tech III

    4 weeks ago

    Saint Petersburg, United States Plasma-Therm LLC Full time

    Job DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...

  • Manufacturing Tech II/III

    3 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II/III

    4 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II/III

    4 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech III

    2 months ago

    St. Petersburg, United States Plasma-Therm Full time

    SUMMARY:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES: NOTE: The Manufacturing Technician III performs all duties of Manufacturing Technician II, and performs the following duties on All ranges of products and equipment including prototype systems....

  • Manufacturing Tech II/III

    2 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.DUTIES AND RESPONSIBILITIES:· Keep a clean and organized work environment per 5S· Facilitates equipment by applying electrical power, pneumatics, and mechanical components in temporary...

  • Manufacturing Tech II

    3 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II

    4 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II

    4 weeks ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Quality Inspector

    3 weeks ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of...

  • Quality Inspector

    2 months ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of...

  • CNC Machinist

    3 weeks ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:As a CNC Machinist at Rev-Tech, you will produce machined parts, set up, and operate a computer numerical control (CNC) machine; maintain quality and safety standards; keep records; maintain equipment and supplies; train new hires.ESSENTIAL DUTIES AND RESPONSIBILITIES:Maintains safe operations by adhering to OSHA...

  • CNC Machinist

    2 months ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:As a CNC Machinist at Rev-Tech, you will produce machined parts, set up, and operate a computer numerical control (CNC) machine; maintain quality and safety standards; keep records; maintain equipment and supplies; train new hires.ESSENTIAL DUTIES AND RESPONSIBILITIES:Maintains safe operations by adhering to OSHA...

  • Manufacturing Tech II

    2 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.DUTIES AND RESPONSIBILITIES:Keep a clean and organized work environment per 5S.Facilitates equipment by applying electrical power, pneumatics, and mechanical components in temporary...

  • Quality Inspector

    1 day ago

    St Petersburg, United States Rev-Tech Manufacturing Solutions Full time

    Job Type Full-time Description SUMMARY: Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of verifying...

  • Equipment Maintenance Tech III

    1 month ago

    St Petersburg, United States Kelly Science, Engineering, Technology & Telecom Full time

    Kelly Engineering is seeking an Equipment Maintenance Technician III to join one of our largest clients in the nation at their St. Petersburg, FL headquarters as they expand their manufacturing operations. Please Apply to learn more! Ideal Candidate: PLC Programming experience is required (any language)Experience with Servomotor requiredExperience with...

  • Equipment Maintenance Tech III

    1 month ago

    St. Petersburg, United States Kelly Science, Engineering, Technology & Telecom Full time

    Kelly Engineering is seeking an Equipment Maintenance Technician III to join one of our largest clients in the nation at their St. Petersburg, FL headquarters as they expand their manufacturing operations. Please Apply to learn more! Ideal Candidate: PLC Programming experience is required (any language)Experience with Servomotor requiredExperience with...

  • Manufacturing Tech I

    4 weeks ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...

  • Manufacturing Tech II

    4 weeks ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...