Manufacturing Tech II/III
3 weeks ago
WHO WE ARE:
Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape frames, photomask and reticles, and solar and flat panel displays.
POSITION SUMMARY:
Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.
DUTIES AND RESPONSIBILITIES:
- Keep a clean and organized work environment per 5S
- Facilitates equipment by applying electrical power, pneumatics, and mechanical components in temporary installations.
- Assembles complex electrical and mechanical assemblies according to drawings, schematics, 3D viewing software, and/or standard procedures using hand tools.
- Performs mechanical alignments and calibration of equipment to ATP (Acceptance Test Procedure), quality standards and other procedures that are used during the test cycle of the products.
- Performs leak detection on Vacuum assemblies to verify vacuum integrity using helium leak detection equipment.
- Operate a multi meter.
- Debugs equipment, including electrical (to PCB level), mechanical, and vacuum systems, to facilitate power-up and gathering of test data. Reports test data with provided templates.
- Records and reports mechanical and electrical failures and discrepancies.
- Participates in the development of manufacturing processes and procedures.
- Prepares systems for shipment, including cleaning, break-down, preparation of miscellaneous list, and interface with shipping.
- Assists in keeping material flow for WIP projects efficient.
- Operates packaging/shipping equipment, including forklift, after completing approved training course.
- All manufacturing technicians may be required to perform other duties related to the general operations of the company as necessary.
- Manufacturing technicians may be required, and should be prepared, to travel domestically and/or internationally for equipment service/repair at customer sites.
- It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality, and Environmental Processes of Hine Automation.
SUPERVISORY RESPONSIBILITIES:
- None
QUALIFICATIONS:
- Associate’s Degree (A.S.) from two-year college or technical school or military training is a plus.
- Five or more years of directly related experience as a technician.
- Experience in the Semiconductor equipment industry a plus
SKILLS AND ABILITIES:
- Ability to interpret assembly drawings, schematics, technical procedures, and other related material.
- Ability to read, interpret, and follow safety rules, operating and maintenance instructions, and procedure manuals.
- Ability to apply basic mathematical skills to solve technical problems.
- Proficient in use of crimpers, torque wrenches, vacuum leak detectors, soldering iron, and other assembly/test hand tools.
- Working knowledge of Windows Office Suite.
- Ability to work independently with little or no direct supervision.
- Ability to adapt to a changing schedule.
-
Manufacturing Tech II
3 weeks ago
Saint Petersburg, United States Hine Automation LLC Full timeJob DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...
-
Manufacturing Tech II
4 weeks ago
Saint Petersburg, United States Hine Automation LLC Full timeJob DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...
-
Manufacturing Tech II
4 weeks ago
Saint Petersburg, United States Hine Automation LLC Full timeJob DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...
-
Manufacturing Tech II/III
2 months ago
Saint Petersburg, United States Hine Automation LLC Full timeJob DescriptionJob DescriptionDescription:SUMMARY:Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.DUTIES AND RESPONSIBILITIES:· Keep a clean and organized work environment per 5S· Facilitates equipment by applying electrical power, pneumatics, and mechanical components in temporary...
-
Manufacturing Tech III
3 weeks ago
Saint Petersburg, United States Plasma-Therm LLC Full timeJob DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...
-
Manufacturing Tech III
2 months ago
Saint Petersburg, United States Plasma-Therm LLC Full timeJob DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...
-
Manufacturing Tech III
4 weeks ago
Saint Petersburg, United States Plasma-Therm LLC Full timeJob DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...
-
Manufacturing Tech III
2 months ago
St. Petersburg, United States Plasma-Therm Full timeSUMMARY:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES: NOTE: The Manufacturing Technician III performs all duties of Manufacturing Technician II, and performs the following duties on All ranges of products and equipment including prototype systems....
-
Manufacturing Tech II
2 months ago
Saint Petersburg, United States Hine Automation LLC Full timeJob DescriptionJob DescriptionDescription:SUMMARY:Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.DUTIES AND RESPONSIBILITIES:Keep a clean and organized work environment per 5S.Facilitates equipment by applying electrical power, pneumatics, and mechanical components in temporary...
-
Manufacturing Tech II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...
-
Quality Inspector
3 weeks ago
Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full timeJob DescriptionJob DescriptionDescription:SUMMARY:Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of...
-
Quality Inspector
2 months ago
Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full timeJob DescriptionJob DescriptionDescription:SUMMARY:Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of...
-
CNC Machinist
3 weeks ago
Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full timeJob DescriptionJob DescriptionDescription:As a CNC Machinist at Rev-Tech, you will produce machined parts, set up, and operate a computer numerical control (CNC) machine; maintain quality and safety standards; keep records; maintain equipment and supplies; train new hires.ESSENTIAL DUTIES AND RESPONSIBILITIES:Maintains safe operations by adhering to OSHA...
-
CNC Machinist
2 months ago
Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full timeJob DescriptionJob DescriptionDescription:As a CNC Machinist at Rev-Tech, you will produce machined parts, set up, and operate a computer numerical control (CNC) machine; maintain quality and safety standards; keep records; maintain equipment and supplies; train new hires.ESSENTIAL DUTIES AND RESPONSIBILITIES:Maintains safe operations by adhering to OSHA...
-
Manufacturing Visual Inspector II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...
-
Manufacturing Visual Inspector II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...
-
Manufacturing Visual Inspector II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...
-
Manufacturing Tech II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...
-
Manufacturing Tech II
4 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...
-
Manufacturing Tech II
3 weeks ago
Petersburg, United States Civica Rx Full timeAbout Civica: Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...
