CNC Mill Operator

1 week ago

North Las Vegas, United States New Frontier Armory LLC Full time
Job DescriptionJob Description

Duties and responsibilities

  • Operate between 1 and 8 CNC mills

    • Not every mill is set up for complete production parts. There will be times when you’re required to run production mills, as well as mills running prep ops, or partial ops to be used in other CNC mills later.

    • Priorities will be stated for each mill running so you know how to manage your time based on order demands

  • Parts Inspections

    • Follow inspection checklists and QC diagrams to ensure the parts you are machining are within spec

      • If discrepancies are found during inspection, try to correct the issue. If you can’t correct the issue, contact your supervisor.

      • Clearly mark blem parts so they’re easily identified by our QC department for final determination

    • Deburr, file or buff parts as needed

    • Test fit parts and assemble subassemblies for function check as stated in QC checklists and diagrams

  • Maintain clean, neat, and orderly work areas

    • The cleanliness of our CNC mills is not an option. This includes not only the insides, but the outsides, tops, and the floor space underneath. Leave the machine as you’d like it left to you by the prior operator

    • Keep workbenches, carts, and machine compartments neat and orderly

    • Sweep/mop floors in accordance with the cleaning schedule

    • Take ownership of the shop as a whole. If you see something that needs to be cleaned, put away, organized, or thrown in the trash, take the initiative and do it. Don’t wait for the next guy or have the “it’s not my area” mentality.

  • Minor maintenance

    • Check/adjust coolant levels daily

    • Add/maintain proper levels of other oils or lubricants as needed

    • Change mill lights, tighten loose nuts or bolts, clean/lubricate spindles

    • Clean filters and screens or coolant systems

  • Parts accountability

    • Accurately input your parts production, scrap, blem counts, and any other important information on the production log at the end of your shift.

      • These numbers are used by management for various reasons, so accuracy of your input is very important

  • Contribute to team efforts by accomplishing varying tasks as needed

 

Qualifications

 

  • Proficient in basic principles of CNC milling

  • Proficient with basic functions and operator’s maintenance of CNC mills

  • Familiarity with HAAS controls is a plus

  • Knowledge of measuring techniques utilizing calipers, micrometers, ect

  • Ability to communicate clearly and work well with others

  • Experience with the AR-15 platform is preferred but not required

  • Forklift experience is a plus, all employees will be trained/certified by NFA

  • Must be able to pass a drug/alcohol test at any given time

 

Working conditions

 

  • 40-hour workweek split into four 10-hour shifts

  • May be required to work nights and/or weekends as company needs dictate

  • Must be able to work in hot or cold conditions as climate control of manufacturing is limited

  • The shop can be loud when multiple machines are running. Hearing and eye protection are provided for your use

 

Physical requirements

 

  • Must be able to lift chip cans approx. 4’ in the air to empty them into a tilt bin

  • May be required to use a pallet jack to move/rearrange pallets weighing upwards of 1000+ lbs

  • Unload 55-gallon drums of coolant from pallets and position them near pump

  • Climb ladders to perform cleaning and maintenance tasks as needed

  • Empty trash cans into dumpster

Company DescriptionNew Frontier Armory is a firearm components manufacturer. A strong candidate for this position will have an excellent background in CNC operation and attention to detail with an emphasis in the firearms industry.Company DescriptionNew Frontier Armory is a firearm components manufacturer. A strong candidate for this position will have an excellent background in CNC operation and attention to detail with an emphasis in the firearms industry.

  • CNC Mill and Lathe Programmer

    2 weeks ago

    Las Vegas, United States Arsenal Inc Full time

    Job DescriptionJob DescriptionSalary: CNC Mill and Lathe ProgrammerJob Summary: As a CNC Programmer, you will play a crucial role in manufacturing processes by creating, optimizing, and maintaining the CNC (Computer Numerical Control) programs used to control precision machinery and equipment. Your expertise will be vital in translating engineering designs...

  • CNC Machine Operator

    2 weeks ago

    North Canton, United States Infrahire Full time

    Job DescriptionJob DescriptionInfraHire is looking for an CNC Machine Operator in McDonald, OHRole DescriptionThis is a full-time on-site role as a CNC Machine Operator in McDonald, Ohio. The CNC Machine Operator will be responsible for the day-to-day tasks of machine operation, quality control, milling, machining, and handling machinery. The role requires...

  • CNC Machinist

    1 week ago

    North Tonawanda, United States BUFFALO PUMPS INC. Full time

    DescriptionELIGIBLE FOR $1000 SIGN-ON BONUSFirst, Second and Third Shift Positions Available Voluntary Overtime AvailableTo set up and operate manually from tape, disc, and/or direct inputted programs CNC turning center with live tooling to perform various turning, drilling, boring, grooving, milling, tapping, facing, tapering, cutoff and deburring in...

  • CNC Machinist

    2 weeks ago

    North Tonawanda, United States Buffalo Pumps Full time

    Job DescriptionJob DescriptionDescription:ELIGIBLE FOR $1000 SIGN-ON BONUSFirst, Second and Third Shift Positions AvailableVoluntary Overtime AvailableTo set up and operate manually from tape, disc, and/or direct inputted programs CNC turning center with live tooling to perform various turning, drilling, boring, grooving, milling, tapping, facing, tapering,...

  • CNC Machinist

    2 weeks ago

    North Tonawanda, United States Buffalo Pumps Full time

    Job DescriptionJob DescriptionDescription:ELIGIBLE FOR $1000 SIGN-ON BONUSFirst, Second and Third Shift Positions AvailableVoluntary Overtime AvailableTo set up and operate manually from tape, disc, and/or direct inputted programs CNC turning center with live tooling to perform various turning, drilling, boring, grooving, milling, tapping, facing, tapering,...

  • CNC Router Operator

    2 weeks ago

    Las Vegas, United States Super Color Digital, LLC Full time

    Job DescriptionJob DescriptionSuper Color Digital was founded in 1981. We are a grand format commercial printer, fabricator & UL listed signage company. We are one of the largest grand format printers in the country with locations in Irvine, CA & Las Vegas, NV. We are true partners to our clients, not just “another vendor.” We are open 24/7 to service...

  • CNC Router Operator

    2 weeks ago

    Las Vegas, United States Super Color Digital, LLC Full time

    Job DescriptionJob DescriptionSuper Color Digital was founded in 1981. We are a grand format commercial printer, fabricator & UL listed signage company. We are one of the largest grand format printers in the country with locations in Irvine, CA & Las Vegas, NV. We are true partners to our clients, not just “another vendor.” We are open 24/7 to service...

  • CNC Machinist

    2 weeks ago

    Las Vegas, United States RAM Aviation, Space & Defense Full time

    Job DescriptionJob DescriptionDescription:*This position is located in St. George, UT. RAM offers relocation assistance for the selected candidate.RAM Aviation, Space & Defense is a manufacturer of quality electro-mechanical products for the Aerospace, Space, Military, Defense and Commercial markets.We are searching for a 2nd shift Monday - Thursday (every...

  • CNC Machinist, Programmer

    1 week ago

    Las Vegas, United States Aerospace Machine & Supply Full time $25 - $35

    Job Details:Job Title: CNC Machinist, Programmer | Job Category: Full TimeLevel/Salary Range: $25-35 based on experience | Position Type: HourlyCompany Aerospace Machine & SupplyShifts Available  | Monday-Thursday 6:00am-4:30pm; Contract Work available Company OverviewLocated in Las Vegas, NV, AMS is a leading manufacturer specializing in state-of-the-art...

  • CNC Setup Machinist III- 1st shift

    Found in: Talent US C2 - 2 weeks ago

    North Charleston, United States Eaton Full time

    Job Description Job Req ID 22435 Work Type Onsite Department MFG Eaton’s IS AER FMC division is currently seeking a CNC Setup Machinist III- 1st shift. The hourly rate for this position is $29/hour per hour. The hours for first shift are as follows; 7:00am - 3:00 pm. Please note the salary information shown above is a general...

  • Horizontal Machine Center Operator

    2 weeks ago

    North Tonawanda, United States Buffalo Pumps Full time

    Job DescriptionJob DescriptionDescription:ELIGIBLE FOR $1000 SIGN-ON BONUSFirst, Second and Third Shift Positions AvailableVoluntary Overtime AvailableTo set up and operate manually from tape, disc, and/or direct inputted programs CNC horizontal machining center equipment to perform various milling, drilling, tapping, boring, grooving, facing, tapering,...

  • Horizontal Machine Center Operator

    1 week ago

    North Tonawanda, United States Buffalo Pumps Full time

    Job DescriptionJob DescriptionDescription:ELIGIBLE FOR $1000 SIGN-ON BONUSFirst, Second and Third Shift Positions AvailableVoluntary Overtime AvailableTo set up and operate manually from tape, disc, and/or direct inputted programs CNC horizontal machining center equipment to perform various milling, drilling, tapping, boring, grooving, facing, tapering,...

  • CNC Lathe Programmer

    1 week ago

    North Canton, United States Job Juncture Full time

    Are you a skilled CNC Programmer with a knack for precision machining? We are seeking a talented individual to join our team. As a CNC Programmer, you will be responsible for developing efficient CNC programs to machine precision parts, ensuring the highest quality standards are met. Key Responsibilities: Write and optimize CNC programs Calculate and...

  • Machinist

    7 days ago

    North Kingstown, United States General Dynamics Electric Boat Full time

    OverviewDo you have programming experience-CNC/G-Codes, experience with milling/lathes, have strong mathematical skills.....then this is the position for you!!!!Join our team, the nation's premier designer and builder of nuclear powered submarines.Duties include but are not limited to: Set up, program editing, and operation of CNC milling and turning...

  • Machinist

    1 week ago

    North Kingstown, United States General Dynamics Electric Boat Full time

    OverviewDo you have programming experience-CNC/G-Codes, experience with milling/lathes, have strong mathematical skills.....then this is the position for you!!!!Join our team, the nation's premier designer and builder of nuclear powered submarines.Duties include but are not limited to: Set up, program editing, and operation of CNC milling and turning...

  • CNC Lathe Programmer

    Found in: beBee S US - 2 weeks ago

    North Canton, United States Job Juncture Full time

    Are you a skilled CNC Programmer with a knack for precision machining? We are seeking a talented individual to join our team. As a CNC Programmer, you will be responsible for developing efficient CNC programs to machine precision parts, ensuring the highest quality standards are met. Key Responsibilities: Write and optimize CNC programs Calculate and set...

  • CNC Lathe Programmer

    1 week ago

    North Canton, United States Job Juncture Full time

    Job DescriptionAre you a skilled CNC Programmer with a knack for precision machining? We are seeking a talented individual to join our team. As a CNC Programmer, you will be responsible for developing efficient CNC programs to machine precision parts, ensuring the highest quality standards are met.Key Responsibilities:Write and optimize CNC...

  • Maintenance Technician 1st shift

    1 week ago

    North Las Vegas, United States PLI Cards Full time

    Job DescriptionJob DescriptionJob Summary: The primary responsibilities for the Maintenance Technician are to analyze, troubleshoot and maintain manufacturing and facility equipment. Utilize test equipment such as VOM meters, oscilloscopes, current clamps, and other diagnostic equipment to accomplish the job. Utilize welders, soldering and brazing equipment,...

  • Maintenance Technician SB 2nd shift

    1 week ago

    North Las Vegas, United States PLI Cards Full time

    Job DescriptionJob DescriptionJob Summary: The primary responsibilities for the Maintenance Technician are to analyze, troubleshoot and maintain manufacturing and facility equipment. Utilize test equipment such as VOM meters, oscilloscopes, current clamps, and other diagnostic equipment to accomplish the job. Utilize welders, soldering and brazing equipment,...

  • CNC Programmer

    3 hours ago

    North Berwick, United States Quest Global Full time

    Job DescriptionJob DescriptionRoles & Responsibilities:·    Generate Accurate programs for Grind CNC operations within customer facility·    Work well as a part of a multi-discipline team·    Maintain and meet potentially tight schedules·    Problem solve and information gatherReview processes and provide solutions and process...