Manufacturing Tech II

4 weeks ago

Saint Petersburg, United States Plasma-Therm LLC Full time
Job DescriptionJob DescriptionDescription:

SUMMARY:

Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.

DUTIES AND RESPONSIBILITIES:

NOTE: The Manufacturing Technician II performs all duties of Manufacturing Technician I, and performs the following duties on the full range of products and equipment including prototype systems, as distinguished from Manufacturing Technician I, which performs duties on a limited range of plasma-processing equipment and products. Work is performed with little or no direct supervision.

  • Facilitates equipment applying water, electrical power and leveling machinery in temporary installation
  • Positions and assembles complex electro/mechanical parts and assemblies part according to blueprints, schematics and/or standard procedures using hand tools
  • Performs complex mechanical alignments and calibration of equipment to the quality standards of ATP (Acceptance Test Procedure) and other procedures that are used during the test cycle of the products
  • Performs leak checks on vacuum and mechanical assemblies using leak detection systems
  • Debugs equipment, including electrical, mechanical, and vacuum systems, to facilitate power-up and gathering of test data. Records and reports test data
  • Writes and improves test procedures for other technician to follow
  • May provide guidance and training for other technicians
  • Maintains Class 10,000 through 100 clean room requirements
  • Prepares systems for shipment, including cleaning, break down, preparation of miscellaneous list, and interface with Shipping
  • Other duties as assigned
  • It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality & Environmental Process of Plasma-Therm

SUPERVISORY RESPONSIBILITIES:

None


QUALIFICATIONS:

  • Associate’s Degree from a two-year college or technical school or military training
  • Minimum two years’ of directly related experience as a test technician required

SKILLS AND ABILITIES:

  • Ability to interpret blueprints, drawings, schematics, technical procedures, and other related material
  • Ability to read, interprets, and follows safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to operate impedance meters and other specializes electronic test equipment
  • Ability to apply basic mathematical skills to solve technical problems
  • Proficient in use of crimpers, torque wrenches, vacuum leak detectors, soldering iron, and other assembly/test hand tools
  • Working knowledge of Windows office
  • Ability to work independently with little or no direct supervision

WORK ENVIRONMENT AND PHYSICAL DEMANDS:

  • The normal work environment is typical of manufacturing clean room facility and support areas such as stockroom, machine shop, and laboratory.
  • The incumbent is routinely required to sit, stand, walk, stoop, kneel, touch, see, and hear, and may be required to lift or move up to 50 pounds.
  • While performing the regular duties of the position, the incumbent is regularly exposed to moving mechanical parts, risk of electrical shock, and possible exposure to toxic or caustic chemicals. The incumbent must be able to wear safety equipment and follow safety instructions.

Plasma-Therm is an equal employment opportunity employer, in accordance with applicable federal and state laws for qualified employees and applicants without regard to race, religion, color, sex, age, national origin, sexual orientation, gender identity, marital status, genetic information, protected veteran or disability status. When requested and necessary, we provide reasonable accommodations for qualified individuals with disabilities.

Requirements:


  • Manufacturing Tech II

    2 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II

    3 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II/III

    2 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II/III

    3 months ago

    Saint Petersburg, United States Hine Automation LLC Full time

    Job DescriptionJob DescriptionDescription:WHO WE ARE: Hine Automation designs and manufactures vacuum, atmospheric automation systems and robotic components. Our team has been designing products for more than 30 years and serving our customers since 2009. We Specialize in semiconductor automation for silicon and compound III-V or II-VI materials, tape...

  • Manufacturing Tech II

    1 month ago

    St. Petersburg, United States Plasma-Therm Full time

    SUMMARY: Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.  DUTIES AND RESPONSIBILITIES: NOTE: The Manufacturing Technician II performs all duties of Manufacturing Technician I, and performs the following duties on the full range of products and equipment including prototype...

  • Manufacturing Tech II

    2 weeks ago

    Saint Petersburg, United States Plasma-Therm LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician performs the following duties on the full range of products and equipment including prototype systems. Work is performed with little...

  • Manufacturing Specialist II – 2nd Shift

    4 weeks ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of mostly sterile...

  • Quality Inspector

    3 months ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:SUMMARY:Our Quality Inspector is responsible for quality inspection of all incoming and outgoing materials assigned for review to the Quality Assurance Department. Requires a substantial level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in support of...

  • Press Brake Operator

    3 months ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:DescriptionSheet metal press brake operator. Bend and finish custom parts/products that meet customer specifications. Organized self-starter. ESSENTIAL DUTIES AND RESPONSIBILITIES:Examines specifications of the customer’s order using drawings, work orders, and/or set up sheets to determine the characteristics of...

  • CNC Machinist

    3 months ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:As a CNC Machinist at Rev-Tech, you will produce machined parts, set up, and operate a computer numerical control (CNC) machine; maintain quality and safety standards; keep records; maintain equipment and supplies; train new hires.ESSENTIAL DUTIES AND RESPONSIBILITIES:Maintains safe operations by adhering to OSHA...

  • Manufacturing Specialist II – 2nd Shift

    4 weeks ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...

  • Sheet Metal Fabrication Specialist

    6 days ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job Summary:The Sheet Metal Fabrication Specialist will be responsible for bending and finishing custom parts/products that meet customer specifications. This is a key role in our production process, requiring attention to detail and the ability to work independently.Key Responsibilities:Examine customer specifications to determine the characteristics of the...

  • Manufacturing Visual Inspector II

    3 months ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...

  • Manufacturing Visual Inspector II

    2 weeks ago

    Petersburg, United States Civica Rx Full time

    About Civica: Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...

  • Manufacturing Visual Inspector II

    1 week ago

    Petersburg, United States BioSpace, Inc. Full time

    Job Details About Civica: Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. "Race to the bottom" pricing of...

  • Manufacturing Tech II

    2 months ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...

  • Manufacturing Tech II

    2 months ago

    Petersburg, United States Civica Rx Full time

    About Civica:Over the past two decades, shortages of generic, injectable medications critical to the lifesaving work of hospitals in the United States have become commonplace and have reached an all time high. Over 300 essential medications are reported to be in shortage, according to industry and FDA reports. “Race to the bottom” pricing of mostly...

  • Quality Assurance Specialist

    1 day ago

    St Petersburg, United States Rev-Tech Manufacturing Solutions Full time

    **Job Type:** Full-time**Description:****SUMMARY:**Our Quality Assurance Specialist is responsible for ensuring the quality of all incoming and outgoing materials assigned for review to the Quality Assurance Department. This role requires a high level of authority, responsibility, independent judgment, impartiality, people skills, and technical know-how in...

  • Manufacturing Tech III

    3 months ago

    Saint Petersburg, United States Plasma-Therm LLC Full time

    Job DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...

  • Manufacturing Tech III

    2 months ago

    Saint Petersburg, United States Plasma-Therm LLC Full time

    Job DescriptionJob DescriptionDescription:Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician III performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with...