CNC Router Machinist/Operator- 1st Shift
1 week ago
Position: CNC Router Machinist/Operator
Job Description
Summary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer knowledge and be a self-starter who pays attention to detail and accuracy and take responsibility for his/her work. The successful candidate will be responsible for producing machined parts by setting up and operating mills and/or lathes, maintaining quality and safety standards, keeping accurate records, maintaining equipment and other duties as assigned.
FLSA Classification: Hourly Non-Exempt
Type: Full-time
Salary Range: $21 to $24 USD per hour
Hours: 2:00PM to 10:30PM, Monday through Friday
Reports to: Lead of CNC Router and Laser Department
Location: 100% onsite at 1055 E. Francis, Ontario, CA 91761
Essential Job Duties: (which include, but not limited to):
- Set up and operate machines to produce parts by using work orders, blueprints, materials and specifications.
- Interprets job instructions such as CNC program, setup sheet, tool list, job routing, part drawings and in-process quality instructions.
- Locates the appropriate tool holders, tools and fixtures and loads them into the machine.
- Loads the CNC program into the machine control including zero and reference points and enters tool length and offsets.
- Determines how fast to feed the work piece into the machine and how much material to remove.
- Ensures that the work piece and milling tools are properly cooled.
- Runs the program, takes measurements and makes adjustments necessary to produce part.
- Modifies programs in response to problems.
- Inspects first run piece and checks succeeding pieces for conformance to specifications.
- Keep work area clean and organized.
- Support 5-S and adhere to health, safety and environmental company guidelines.
- Perform cross-functional operations.
Minimum Requirements:
- High school diploma or general education diploma (GED).
- Minimum 5 years' experience in related area.
- Minimum 5 years' CNC lathe machining experience.
- Minimum 5 years' mill machinist experience.
- Ability to read and interpret complex blueprints.
- Knowledge of a variety of cutting tools.
- Knowledge of CNC mill machine controls.
- Ability to read and interpret documents such as work orders.
- Ability to work with shop math.
- Ability to use standard measuring tools (i.e. micrometers, calipers)
- Ability to communicate effectively in oral and written English.
- Ability to learn to perform cross-functional operations.
Preferred Requirements:
- Experience with 2-5 axis machining of metallics, composites, honeycomb and plastics preferred.
- Experience with 5 axis HAAS and Thermwood machines a plus.
Work authorization/security clearance requirements:
- Must be US Citizen or Authorized to work in the US.
- Must be willing to undergo and pass a criminal background check.
- Must be able to pass a pre-employment physical examination, including an alcohol and drug test.
Work environment: Machinists spend most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.
Physical demands: Use their hands to handle, control, or feel objects, tools, or controls. Stand for long periods of time. Repeat the same movements. Bend or twist their body. The employee must regularly lift and/or move up to 40 pounds and occasionally lift/or move up to 50 pounds.
Hera Technologies, LLC Company Profile
Hera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial Airline industries. We are a team of talented, ethical and motivated individuals committed to providing our customers with superior quality products delivered on time and aimed to exceed customer expectations. We provide a safe and rewarding work environment that acknowledges individual achievement and promotes entrepreneurial spirit, and teamwork.
Hera Technologies, LLC specializes in CNC machining, knife cutting, laser cutting, structural bonding and painting, processing and kitting of a wide variety of metallic, and engineered materials. Our CNC work centers, high-speed routing machines and knife cutting systems offer 2D cutting and 3, 4 and 5-axis milling of a wide range of materials including: single-ply materials, composites, honeycomb core, plastics, ferrous and non-ferrous metals.
Benefits:
- Company paid employee medical, dental and vision insurance
- Retirement plan option upon eligibility
- Paid Sick Leave
- Paid Vacation
- 10 paid holidays
- Tuition reimbursement
- Discretionary bonuses and cash-based employee referral program
- Incentivized employee referral program
- Many other great company perks including Hera branded merchandise, a great work environment, and a supportive management team
Hera Technologies, LLC is proud to be an Equal Opportunity Employer. We maintain a drug-free workplace and retain the option to perform substance abuse testing before and during employment.
-
CNC Router Machinist/Operator
3 months ago
Ontario, United States Hera Technologies LLC Full timeJob DescriptionJob DescriptionPosition: Router Machinist/Operator - 1st ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...
-
**CNC Machinist
4 days ago
Ontario, California, United States Hera Technologies LLC Full timeJob SummaryWe are seeking a highly skilled and experienced CNC Machinist to join our team at Hera Technologies LLC. As a CNC Machinist, you will be responsible for producing high-quality machined parts by setting up and operating mills and/or lathes, maintaining quality and safety standards, and performing various other duties as assigned.Key...
-
CNC Machinist
3 weeks ago
Ontario, United States Maury Microwave Corporation Full timeMAURY MICROWAVE JOB DESCRIPTION Job Title: CNC Machinist IIIFLSA Status: Hourly - Full Time, 5:00 AM- 1:30 PM Department: ManufacturingReports to (Title): Production Manager, OperationsCompany Profile:Maury Microwave is your calibration, measurement, and modeling solutions partner. By taking responsibility for all aspects of calibration, measurement, and...
-
CNC Machinist Technician
7 days ago
Ontario, California, United States York Employment Services, Inc. Full timeJob SummaryYork Employment Services, Inc. is seeking a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for operating and maintaining CNC machines to produce precision parts and components according to specifications.Key Responsibilities:Set up and operate CNC machines, including lathes, mills, and grinders, to produce...
-
CNC Machinist Operator
4 weeks ago
Ontario, United States Aerospace Commercial Tooling, Inc Full time $22 - $23Job DescriptionJob DescriptionPosition available for CNC Machinist (entry level) for set up and running of various machines and materials.Potential for learning of CAD programming Company DescriptionCompany established 1987Company DescriptionCompany established 1987
-
CNC Milling Machinist
3 months ago
Ontario, United States Hera Technologies LLC Full timeJob DescriptionJob DescriptionPosition: CNC Milling Machinist - 2nd ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer...
-
CNC Machinist
4 days ago
Ontario, California, United States The Gund Company Full timeJob SummaryThe Gund Company is seeking a highly skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for implementing the production fulfillment process by creating programs for CNC machine tools related to the fabrication of parts according to customer requirements while minimizing costs.Key ResponsibilitiesDevelop programs to...
-
CNC Machinist Lead
2 weeks ago
Ontario, United States ResourceMFG Full timesummary We are looking for an experienced CNC Machinist Lead in Chatsworth CA. $25- $30 and hour M-F some Saturdays Apply today!! Job description: Review, negotiate and administer contracts with government agencies, including prime contracts, subcontracts, and modifications Develop and maintain CNC lathe & mill programs for a variety of parts and products....
-
CNC Machinist
2 months ago
Ontario, United States Maury Microwave Corporation Full timeJob DescriptionJob DescriptionMAURY MICROWAVE JOB DESCRIPTION Job Title: CNC Machinist IIIFLSA Status: Hourly – Full Time, 5:00 AM- 1:30 PM Department: ManufacturingReports to (Title): Production Manager, OperationsCompany Profile:Maury Microwave is your calibration, measurement, and modeling solutions partner. By taking responsibility for all aspects of...
-
Precision CNC Machinist
2 weeks ago
Ontario, California, United States Maury Microwave Corporation Full timeJob OverviewCompany Overview:Maury Microwave Corporation specializes in calibration, measurement, and modeling solutions. Our commitment to excellence empowers clients by providing comprehensive services that ensure seamless integration of components, from the smallest adapters to the largest test systems.Position Summary:We are in search of a skilled CNC...
-
CNC Machinist
5 days ago
Ontario, California, United States Maury Microwave Corporation Full timeAbout the RoleWe are seeking a highly skilled CNC Machinist to join our team at Maury Microwave Corporation. As a CNC Machinist, you will be responsible for setting up, running, and troubleshooting CNC and conventional machines on site.Key ResponsibilitiesAnalyze and interpret blueprints, specifications, or sample parts to determine the dimensions and...
-
CNC Machinist Technician
2 weeks ago
Ontario, California, United States Aerospace Commercial Tooling, Inc Full timeJob OverviewWe are seeking a skilled CNC Machinist Technician to operate and manage a variety of machining equipment and materials. This position is ideal for individuals looking to develop their skills in a dynamic environment.Key ResponsibilitiesSet up and operate CNC machines to produce precision parts.Ensure quality control throughout the machining...
-
CNC Lathe Machinist
3 weeks ago
Ontario, United States Anansys Staffing LLC Full timeJob DescriptionJob DescriptionOur client is a leading manufacturer of computerized, precision machine components for the aerospace, defense and commercial industries. Which is located in Ontario, California.Client has continued a pattern of successful growth through entrepreneurial spirit, superior products, dependability and excellent service to its...
-
Metrology Inspector
3 months ago
Ontario, United States Hera Technologies LLC Full timeJob DescriptionJob DescriptionHera Technologies, LLC is seeking a highly qualified Metrology Inspector - 1st ShiftCompany ProfileHera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial...
-
Operator III
1 week ago
Ontario, United States The Gund Company Full timeJob Type Full-timeDescriptionOverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do!The Gund...
-
Operator III
6 days ago
Ontario, United States The Gund Company Full timeJob Type Full-time Description Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund...
-
Manufacturing Equipment Specialist
7 days ago
Ontario, California, United States York Employment Services, Inc. Full timeJob SummaryYork Employment Services, Inc. is seeking a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for operating and maintaining CNC machines to produce precision parts and components.Key Responsibilities:Set up and operate CNC machines, including lathes, mills, and grinders, to produce high-quality parts and...
-
Router Dispatcher
1 month ago
Ontario, United States GSFoods Full timeJob DescriptionJob DescriptionTITLE: Router/Dispatcher DIVISION: Warehouse ClericalREPORTS TO: Routing Specialist Manager FLSA CLASSIFICATION: Non-Exempt/HourlyGold Star Foods is the leading food distributor to K-12 schools in the United States. We are a company devoted to providing our customers with incredible customer service. We know that it is our...
-
Custodian / Janitor - 1st Shift
3 months ago
Ontario, United States Uline Full timePerform general labor to support operation requirements as needed. Sweeping, mopping, dusting racks, yard maintenance, building maintenance, etc. Process trash removal and corrugated scraps with a compactor. Operate floor scrubber (electric or propan Custodian, Janitor, 1st Shift, Building Maintenance, Property Management
-
Machine Operator
3 months ago
Ontario, United States Amrep Manufacturing Company, LLC Full timeJob DescriptionJob DescriptionWastequip Truck Division Amrep has an immediate opportunity for a Machine Operator - 2nd shift to support our Ontario, CA manufacturing operation. Our ideal candidate will have the skills and experience necessary to operate machineryPay: $19.13/HR plus full benefits (health, dental, life, 401k, and more)Shift Hours: 3:30 PM to...