Machine Operator Apprentice

1 week ago

Waukesha, United States Eaton Manufacturing Full time
Job DescriptionJob Description

The Coil Winder Machine Operator Apprentice will set-up and operate winding machines to produce coils of various size to specifications called for on winding sheets, winding diagrams, and order pouches. Coil conductor configurations include strip, round, and rectangular wire, in various combinations. The training apprenticeship program will include classroom technical training, welding and brazing training at WCTC, use of HoloLens virtual reality smart glasses, and on the job training.

In this function you will:

  • Read and interpret winding specification documents.

  • Find the coil number, quantity, and revision, and also record the coil number on the coil and on labor recording paperwork.

  • Install and adjust appropriate devices as needed onto the coil winding machine in order to meet window sizing specifications.

  • Load strip, conductor, and insulating paper to dereeling mechanisms on the machine.

  • Measure materials, make adjustments to the machine to accommodate materials, and verify proper alignment.

  • Place and adjust the coil form as specified.

  • Apply pack out as needed per specification, repeated on each section of the coil.

  • Fold, insulate, and tape-weld pre-cut leads to strip stock of coil body.

  • Operate a crimping tool to crimp wire to static shielding.

  • Complete two-week welding and brazing training at WCTC

Qualifications:

Required (Basic) Qualifications:

  • Candidates must be legally authorized to work in the United States without company sponsorship, now or in the future.
  • No relocation is being offered for this role.All candidates considered must live within 50 miles of the Waukesha, WI facility.Active Duty Military Service member candidates are exempt from the geographical area limitation.

Preferred Qualifications:

  • High School Diploma or GED (General Education Degree) from an accredited institution.
  • Minimum of one (1) year manufacturing experience or military technical training.
  • Minimum of six (6) months prior coil winding experience.
Skills:
  • Ability to interpret prints, quality specifications, and applicable instructions for safety, maintenance, operating, and engineering.
  • Ability to work overtime when required.
  • Ability to lift up to 50 LBS; bend, twist, grab, reach, stand, walk, push, pull, use both hands to lift and lower materials, and perform all other essential duties with or without reasonable accommodations.

You should be proficient in:

  • Blueprint Reading
  • Mechanical Troubleshooting Skills
  • Mechanical Assembly Skills
  • Excellent Communication Skills
  • Shop Math Skills

Salary info:

$22.30 - $24.80 / hr

  • Machine Operator Apprentice

    5 days ago

    Waukesha, Wisconsin, United States Path Engineering Full time

    Job SummaryWe are seeking a highly motivated and detail-oriented Machine Operator Apprentice to join our team at Path Engineering. As a Machine Operator Apprentice, you will be responsible for operating machines and equipment to perform various tasks such as cutting, shaping, and assembling materials.Key ResponsibilitiesOperate machines and equipment to...

  • Coil Winding Machine Operator Apprentice

    7 days ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Job SummaryEaton Manufacturing is seeking a skilled Coil Winding Machine Operator Apprentice to join our team. As a Coil Winding Machine Operator Apprentice, you will be responsible for setting up and operating winding machines to produce coils of various sizes to specifications.Key ResponsibilitiesRead and Interpret Winding Specifications: Read and...

  • Winding Machine Operator

    2 weeks ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Position OverviewThe Winding Machine Operator Apprentice at Eaton Manufacturing will be responsible for setting up and operating winding machinery to create coils of various dimensions according to the specifications outlined in winding documentation. The coil configurations may include strip, round, and rectangular wire in diverse combinations. This...

  • Machine Operator

    2 months ago

    Waukesha, United States Engineering Specialists Inc Full time

    Job DescriptionJob DescriptionDescription:Want to be part of an exciting and growing team? Looking for a flexible, family-friendly work environment? Do you like working on a variety of projects? Are you looking for your next challenge to develop innovative solutions?Engineering Specialists in Waukesha, WI has the perfect Machine Operator role for you!A...

  • Machine Operator

    1 month ago

    Waukesha, Wisconsin, United States The Gund Company Full time

    Description: The Gund Company has an immediate opening at our­­­­­ Waukesha, WI manufacturing plant for a full-time entry level Second Shift Machine Operator working on our composites molding press/pultrusion line. Do you want to join a company that offers you great pay, benefits, growth opportunities, and a challenging environment? Join The Gund...

  • Machine Operator

    2 months ago

    Waukesha, United States Celerity Staffing Solutions Full time

    Job DescriptionJob DescriptionDIRECT HIRE OPENING!CNC SAW OPERATOR RESPONSIBILITIES are to set up/operate power saws to cut, miter, and trim material according to specifications. Select and install blades, adjust speed, feed rates and tensions. Use hoist to mount material, verify finished material dimensions using measuring instruments. QUALIFICATIONS: Saw...

  • packaging machine operator

    3 months ago

    Waukesha, United States SITE Staffing Full time

    JOB REQUIREMENTS: Join Our Team as a Packaging Machine Operator! As a Packaging Machine Operator, you play a vital role in ensuring the efficient and accurate operation of our packaging machinery. Your commitment to adhering to safety, quality, and regulatory standards will contribute significantly to producing top-quality packages of our products. Essential...

  • Machine Operator

    2 weeks ago

    Waukesha, United States Metal Era LLC Full time $18 - $20

    Job DescriptionJob DescriptionWe are the largest North-American manufacturer of metal coping and fascia systems for the commercial roofing industry. Our organization offers many opportunities for team-focused manufacturing assembly, production, and machine operators on our production floor. Our full-time employees enjoy access to leading health and wellness...

  • Machine Operator

    2 months ago

    Waukesha, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYTo proficiently fabricate and weld ferrous and nonferrous materials, sheet, plate and structural steels by using the following machines and equipmentMachine Operator Must develop competency and achieve proficiency in the following operations: Grinder, belt sander, shot blast, vibratory finish, layout, shear, punch,...

  • 2nd Shift Machine Operator

    3 months ago

    Waukesha, United States H O BOSTROM CO INC Full time

    Job DescriptionJob DescriptionDescription:JOB SUMMARY: The Machine Operator will have the opportunity to flex between working with both a laser and a brake press machine. This position is responsible for bending/fabricating parts according to specifications, and plays a critical role in ensuring that our parts are created in both an efficient and timely...

  • Hair Stylist Apprentice

    3 days ago

    Waukesha, Wisconsin, United States Great Clips Full time

    Unlock Your Potential as a Hair StylistAre you a motivated and creative individual looking to launch your career in hairstyling? Great Clips is seeking a talented Cosmetology Trainee to join our dynamic team of salon professionals.As a Hair Stylist Apprentice, you will have the opportunity to develop your skills and gain essential experience in a fast-paced...

  • Winding Machine Operator Trainee

    2 weeks ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    The Winding Machine Operator Trainee will be responsible for setting up and operating winding machinery to manufacture coils of various dimensions according to specified requirements outlined in winding documentation and order details. The configurations of coil conductors may include strip, round, and rectangular wire in different combinations. This...

  • Coil Winding Specialist

    7 days ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Job SummaryEaton Manufacturing is seeking a skilled Coil Winding Machine Operator Apprentice to join our team. As a Coil Winding Machine Operator Apprentice, you will be responsible for setting up and operating winding machines to produce coils of various sizes to specifications.Key ResponsibilitiesRead and Interpret Winding Specifications: Read and...

  • Coil Winding Specialist

    7 days ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Job Summary:Eaton Manufacturing is seeking a skilled Coil Winding Machine Operator Apprentice to join our team. As a Coil Winding Machine Operator Apprentice, you will be responsible for setting up and operating winding machines to produce coils of various sizes to specifications.Key Responsibilities:Read and interpret winding specification documents to...

  • Industrial Baker and Packaging Machine Operator

    7 days ago

    Waukesha, Wisconsin, United States SITE Staffing Full time

    We are currently recruiting for a skilled Industrial Baker and Packaging Machine Operator to join our team at SITE Staffing. This position is a great opportunity for individuals who are passionate about food manufacturing and production.**Job Summary:**We are seeking a highly motivated and detail-oriented individual to work in a fast-paced food manufacturing...

  • Packaging Machine Operator

    7 days ago

    Waukesha, Wisconsin, United States SITE Staffing Full time

    Job SummaryWe are seeking a skilled Packaging Machine Operator to join our team at SITE Staffing. As a key member of our production team, you will be responsible for ensuring the efficient operation of our packaging equipment.Key ResponsibilitiesEquipment Setup and Operation: Set up and run the bagging machines and cartoner according to customer or internal...

  • Machine Shop Supervisor

    7 days ago

    Waukesha, Wisconsin, United States Adecco Full time

    Job Summary:Adecco is seeking a highly skilled Machine Shop Supervisor to join our team. As a key member of our operations team, you will be responsible for overseeing the daily activities of the Machine Shop, ensuring efficient production and high-quality output.Key Responsibilities:Maintain a safe and healthy work environment, adhering to all relevant...

  • Packaging Machine Operator

    1 week ago

    Waukesha, United States SITE Staffing Full time

    Packing Machine Operator Shift: 2nd, (1:45-10:15pm) Pay: $18.25/hr Job Description: Set up/running of the bagging machines and cartoner per customer or internal specs. Help maintain the equipment by doing a general inspection of equipment, performing basic mechanical troubleshooting and reporting any repair needs to your supervisor. Conducting testing...

  • Machine Operator

    3 months ago

    Waukesha, United States The Gund Company Full time

    Job DescriptionJob DescriptionDescription:The Gund Company has an immediate opening at our­­­­­ Waukesha, WI manufacturing plant for a full-time entry level Second Shift Machine Operator working on our composites molding press/pultrusion line. Do you want to join a company that offers you great pay, benefits, growth opportunities, and a challenging...

  • Machine Operator

    2 weeks ago

    Waukesha, United States The Gund Company Full time

    Description: The Gund Company has an immediate opening at our­­­­­ Waukesha, WI manufacturing plant for a full-time entry level Second Shift Machine Operator working on our composites molding press/pultrusion line. Do you want to join a company that offers you great pay, benefits, growth opportunities, and a challenging environment? Join The Gund...