Tool and Die Technician

2 months ago

Canton, United States Ohio Gratings, Inc Full time
Job DescriptionJob Description

SUMMARY: The Tool and Die Technician will plan and execute new stamping die builds in the 50-250 ton range utilizing a small team of tool makers and apprentices. These dies could range from a single hit manual load unit to a coil fed progressive. This person will also need to work with existing dies and troubleshoot in press problems as needed. This person must be able to recognize roadblocks in a new die build and work to close tolerances when required. This position will also support repair items, reverse engineering of legacy components, and serve as a mentor to junior team members. Additionally, the Technician will handle tool and die repair tasks, ensuring tools and dies are maintained and repaired efficiently to minimize downtime.

This job description does not describe all activities, duties, responsibilities, or physical demands required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time, with or without notice.

ESSENTIAL DUTIES / RESPONSIBILITIES:

  • Plan and coordinate new die and tooling builds.
  • Collaborate with tool design to create Bill of Material (BOM) for new builds.
  • Identify press tooling that is obsolete or at end of life cycle to plan remaking the die.
  • Ability to troubleshoot and diagnose in press stamping problems.
  • Identify design improvement opportunities for existing dies.
  • Direct work assignments and participate in the review process of your team.
  • Support die setters in setup and new tooling tryout.
  • Train new tool makers and/or apprentices on correct trade standards.
  • Operate tool room equipment as needed for new tooling and repair items.
  • Perform tool and die repair tasks to ensure tools and dies are functional and safe.
  • Comply with all operating procedures, instructions, and safety rules.
  • Communicate effectively and serve as the subject matter expert for tooling and die issues.
  • Recognize and report all quality issues as required.
  • Perform other duties as assigned by supervision.

EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES:

  • High school diploma or GED.
  • Completion of Tool and Die Apprenticeship, 2-year Associates Degree, or 10 or more years in toolmaking, die repair, or a combination of schooling and experience.
  • Extensive tool and die knowledge in progressive and single hit dies.
  • Familiarity with tool room process flow and project deadlines.
  • Ability to reverse engineer detail components without part prints.
  • Understands heat treatment, tool steel selections, and basic metallurgy.
  • Ability to read and interpret design blueprints.
  • Strong attention to detail and in press troubleshooting.
  • Ability to work independently or in a team environment.
  • Ability to stand for extended periods.
  • Ability to lift heavy objects.
  • Ability to work after-hours if required.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is encountered with repetitive movement tasks, which requires the employee to stand, walk, stoop, bend, reach, grasp, push, and pull grating material of various sizes and weights for long periods of time. Must regularly lift or move up to 50 pounds and occasionally lift or move up to 75 pounds, using proper lifting techniques, help from another employee, or other available resources such as lifting or moving equipment.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the essential duties of this job, the employee is regularly working on the production floor. The work environment requires the use of Personal Protective Equipment (PPE). Exposure to noise, dust, heat, and cold on a regular basis. Exposure to machine and tool hazards requiring care and attention to safety rules and standards.

EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

  • Tool & Die Machinist

    3 months ago

    Canton, United States Canton Drop Forge Full time

    Job DescriptionJob DescriptionTool & Die MachinistThe normal schedule is Monday through Friday, 8-hour shifts - though overtime may be required occasionally, as an 8-hour shift on Saturdays.Day Shift: 7 AM to 3 PMAfternoon Shift: 3 PM to 11 PMNote: As a union-based employer, we are unable to guarantee any shift preference following initial training on day...

  • Tool & Die Maker

    3 months ago

    Canton, United States Crown Cork & Seal USA, Inc. Full time

    COMPANY OVERVIEW: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging...

  • Tool and Die Maker

    1 week ago

    Canton, Ohio, United States ABC Technologies (USA Region) Full time

    Job SummaryABC Technologies (USA Region) is seeking a skilled Tool and Die Maker to join our team in the manufacturing process of automotive parts. As a critical member of our production team, you will play a key role in designing, fabricating, and maintaining injection molds to produce high-quality components efficiently and cost-effectively.Key...

  • Tool & Die Maker

    3 months ago

    East Canton, United States Crown Cork & Seal USA, Inc. Full time

    COMPANY OVERVIEW: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging...

  • Tool and Die Maker

    3 months ago

    Canton, United States ABC Technologies (USA Region) Full time

    Job DescriptionJob DescriptionABC Technologies is a leading global manufacturer and supplier of custom, highly engineered, technical plastics, and light-weight innovations to the North American light vehicle industry. Serving more than 25 major original equipment manufacturer customers in 7 countries, the Company is Molding The Future and is strategically...

  • CAD Designer

    2 months ago

    Canton, United States Canton Drop Forge, Inc. Full time

    Die DesignerNote: Occasional shift variances for production presence.Canton Drop Forge, a leading producer of large, closed die forgings in Canton, Ohio, is seeking a Die Designer to join our team.Position Description:The Die Designer will be working with custom steel forging applications to create highly engineered solutions in the transportation and...

  • CAD Designer

    2 months ago

    Canton, United States Canton Drop Forge, Inc. Full time

    Die DesignerNote: Occasional shift variances for production presence.Canton Drop Forge, a leading producer of large, closed die forgings in Canton, Ohio, is seeking a Die Designer to join our team.Position Description:The Die Designer will be working with custom steel forging applications to create highly engineered solutions in the transportation and...

  • CAD Designer

    3 months ago

    Canton, United States Canton Drop Forge Full time

    Job DescriptionJob DescriptionDie DesignerNote: Occasional shift variances for production presence.Canton Drop Forge, a leading producer of large, closed die forgings in Canton, Ohio, is seeking a Die Designer to join our team.Position Description:The Die Designer will be working with custom steel forging applications to create highly engineered solutions in...

  • Automotive Service Technician

    5 days ago

    Canton, Ohio, United States BMW Dealer Technician Opportunities Full time

    Job DescriptionJob Title: Automotive Service TechnicianJob Summary:We are seeking a highly skilled and experienced Automotive Service Technician to join our team at BMW of North Canton. As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles.Key Responsibilities:Receiving and...

  • Production Technician

    2 weeks ago

    Canton, Ohio, United States Openwork Full time

    Openwork is assisting a local client in their search for a skilled Production Technician in Canton, GA. As a Production Technician, you will play a vital role in the manufacturing process of blades and blower wheels. Your responsibilities will encompass operating various production equipment and ensuring the quality of manufactured...

  • CNC Machine Maintenance Technician

    2 weeks ago

    Canton, Ohio, United States International Machine Tool & Full time

    Job DescriptionWe are looking for an experienced CNC Machine Maintenance Technician to join our dedicated team. This role involves diagnosing and repairing various machinery, particularly focusing on CNC systems, including Makino machines and Fanuc controls. The ideal candidate will have a strong background in mechanical service, specializing in the...

  • Tooling Technician- Night Shift

    2 months ago

    Canton, United States Consolidated Metco Full time

    Job DescriptionJob DescriptionConMet - Canton, NC location is looking for an experienced Tooling Technician to help support our Tooling Department on night shift.What You Will Do: Read job specifications to determine machine adjustments and material requirementsRead blueprints and produce parts as required for mold and fixture maintenance Duplicate given...

  • Tooling Technician- Night Shift

    1 week ago

    Canton, United States ConMet Full time

    ConMet - Canton, NC location is looking for an experienced Tooling Technician to help support our Tooling Department on night shift. What You Will Do: Read job specifications to determine machine adjustments and material requirements Read blueprints and produce parts as required for mold and fixture maintenance Duplicate given parts when blueprints are...

  • Molding Equipment Technician

    2 weeks ago

    Canton, Ohio, United States ConMet Monroe Facility Full time

    Job OverviewPosition Title: Set-up Technician BOur ConMet Monroe Facility is seeking a dedicated individual to become a vital part of our Molding department's technical team. If you possess a strong aptitude for operating heavy machinery, including overhead cranes and forklifts, and enjoy hands-on work, this opportunity may be for you. The role of Set-up...

  • Laser Technician

    4 months ago

    Canton, United States GNS North America Full time

    Who We Are and What We Do Since GNS was founded in 1971, the global footprint has expanded rapidly. The company has expanded to several countries around the world. GNS America was established in 2009. Our core business is in conventional stamping, hot stamping, welding, and assembly. Our tool and die capability offer simulation and full design and build...

  • General Automotive Technician

    4 months ago

    Canton, United States AAMCO Transmissions and Total Car Care Full time

    Job DescriptionJob DescriptionAs a General Automotive Technician you will be called upon to service a broad range of vehicle repair issues and for quickly identifying the cause of performance problems. Position ResponsibilitiesTotal Car Care & Preventative MaintenanceAssist other technicians in performing technical activitiesExplain problems discovered...

  • Automotive Service Technician

    2 weeks ago

    Canton, Georgia, United States AAMCO Transmissions and Total Car Care Full time

    Position OverviewAs an Automotive Service Technician, you will be responsible for addressing a wide array of vehicle repair challenges and efficiently diagnosing performance issues.Key ResponsibilitiesComprehensive Vehicle Care & Preventative MaintenanceSupport fellow technicians in executing technical tasksCommunicate issues identified during vehicle...

  • Injection Mold Technician

    2 weeks ago

    Canton, Ohio, United States ConMet Monroe Facility Full time

    Job OverviewPosition Title: Set-up Technician BOpportunity Code: SETUP005612The ConMet Monroe Facility is seeking a dedicated individual to become part of our Molding department's technical team. This role is ideal for those who have a passion for operating heavy machinery, including overhead cranes and forklifts, and enjoy hands-on work. Set-up Technicians...

  • Machine Repair

    3 months ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionWe are seeking a highly skilled, Machine Repair and Service Technicians. We focus on troubleshooting Controls, Machine Tool Service, Rebuilds, Relocating and Retrofit of CNC Machines; specializing in Makino machines and Fanuc Controls. Rebuilding Spindles, Ballscrews and Guideways. Our Field Service work is done locally with the...

  • Machine Repair

    5 months ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionWe are seeking a highly skilled, Machine Repair and Service Technicians. We focus on troubleshooting Controls, Machine Tool Service, Rebuilds, Relocating and Retrofit of CNC Machines; specializing in Makino machines and Fanuc Controls. Rebuilding Spindles, Ballscrews and Guideways. Our Field Service work is done locally with the...