See more Collapse

CNC Router Machinist/Operator

4 weeks ago

Ontario, United States Hera Technologies LLC Full time
Job DescriptionJob Description


Position: Router Machinist/Operator - 1st Shift

Job Description

Summary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer knowledge and be a self-starter who pays attention to detail and accuracy and take responsibility for his/her work. The successful candidate will be responsible for producing machined parts by setting up and operating CNC routers, maintaining quality and safety standards, keeping accurate records, maintaining equipment and other duties as assigned.

FLSA Classification: Hourly Non-Exempt

Type: Full-time

Salary Range: $21 to $24 USD per hour

Hours: 6:00AM to 2:30PM, Monday through Friday

Reports to: Production Manager

Location: 100% onsite at 1055 E. Francis, Ontario, CA 91761


Essential Job Duties: (which include, but not limited to):
•Set up and operate machines to produce parts by using work orders, blueprints, material lists, and specifications.

•Interprets job instructions such as CNC programs, tool list, job routing, part drawings and in-process quality instructions.

•Locates the appropriate tool holders, tools, and fixtures and loads them into the machine.

•Staging and prepping of material for cutting.

•Determines proper tooling and feed rates per material/Job.

•Ensures that the work piece and tools are properly cooled.

•Runs the program, takes measurements, and makes any adjustments necessary to produce quality parts.

•Modifies programs in response to problems.

•Cleans/deburrs parts before transfer to next department.

•Inspects first run piece and checks succeeding pieces for conformance to specifications.

•Keeping work area clean and organized.

•Support 5-S and adhere to health, safety and environmental company guidelines.

•Perform cross-functional operations.

Minimum Requirements:
•High school diploma or general education diploma (GED).

•Minimum 2 years' experience in related area.

•Ability to read and interpret complex blueprints, drawings, and work orders.

•Knowledge of a variety of cutting tools.

•Ability to work with shop math.

•Ability to use standard measuring tools (i.e. micrometers, calipers).

•Ability to communicate effectively in oral and written English.

•Ability to learn to perform cross-functional operations.

Preferred Requirements:
•Experience with machining of metallics, composites, and plastics.

•Experience with Multicam CNC Routers.•Experience with EnRoute CAD/CAM Software.

Work authorization/security clearance requirements:

•Must be authorized to work in the US.
•Must be willing to undergo a criminal background check.
•Must be able to pass a pre-employment physical examination, including a drug and alcohol test.

Work environment: Machinists spend most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.

Physical demands: Use their hands to handle, control, or feel objects, tools, or controls. Stand for long periods of time. Repeat the same movements. Bend or twist their body. The employee must regularly lift and/or move up to 40 pounds and occasionally lift/or move up to 50 pounds.

Hera Technologies, LLC Company Profile

Hera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial Airline industries. We are a team of talented, ethical and motivated individuals committed to providing our customers with superior quality products delivered on time and aimed to exceed customer expectations. We provide a safe and rewarding work environment that acknowledges individual achievement and promotes entrepreneurial spirit, and teamwork.

Hera Technologies, LLC specializes in CNC machining, knife cutting, laser cutting, structural bonding and painting, processing and kitting of a wide variety of metallic, and engineered materials. Our CNC work centers, high-speed routing machines and knife cutting systems offer 2D cutting and 3, 4 and 5-axis milling of a wide range of materials including: single-ply materials, composites, honeycomb core, plastics, ferrous and non-ferrous metals.

Benefits:
•Company paid employee medical, dental and vision insurance
•Retirement plan option upon eligibility
•Paid Sick Leave
•Paid Vacation
•10 paid holidays
•Tuition reimbursement
•Discretionary bonuses employee referral program
•Incentivized cash-based employee referral program


Hera Technologies, LLC is proud to be an Equal Opportunity Employer. We maintain a drug-free workplace and retain the option to perform substance abuse testing before and during employment.

We have other current jobs related to this field that you can find below

  • 2nd Shift

    2 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: 2nd Shift -CNC Router Machinist/OperatorJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • 2nd Shift

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: 2nd Shift -CNC Router Machinist/OperatorJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • CNC Operator

    4 weeks ago

    Ontario, United States PeopleReady Full time

    Job DescriptionCNC OperatorPeopleReady of Ontario, NY is now hiring CNC Operators! People Ready is looking for a Multi Axis Lathe Machinist. In this role you will manufacture tight tolerance Aerospace and Space components in a variety of materials including the latest exoctic alloys. You will be apart of a skilled and growing team pushing the limits of...

  • CNC Operator

    2 weeks ago

    Ontario, New York, United States PeopleReady Full time

    Job DescriptionCNC OperatorPeopleReady of Ontario, NY is now hiring CNC Operators People Ready is looking for a Multi Axis Lathe Machinist. In this role you will manufacture tight tolerance Aerospace and Space components in a variety of materials including the latest exoctic alloys. You will be apart of a skilled and growing team pushing the limits of...

  • CNC Milling Machinist

    1 month ago

    Ontario, United States Hera Technologies LLC Full time

    Position: CNC Milling Machinist - 2nd ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer knowledge and be a self-starter...

  • CNC Milling Machinist

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Position: CNC Milling Machinist - 2nd ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer knowledge and be a self-starter...

  • CNC Milling Machinist

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: CNC Milling Machinist - 2nd ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer...

  • cnc machinist- level c- level a

    2 weeks ago

    Ontario, California, United States JCM Engineering Corp. Full time

    Job DescriptionJob DescriptionJCM Engineering Corp. is a leading manufacturer of computerized precision machine components for the aerospace, defense and commercial industries and is located in Ontario, California.JCM has continued a pattern of successful growth through entrepreneurial spirit, superior products, dependability and excellent service to its...

  • Operator III

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-timeDescriptionOverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do!The Gund...

  • CNC Machinist/Programmer

    4 weeks ago

    Ontario, United States Hinson Enterprises Full time

    Job DescriptionJob DescriptionWe are seeking a CNC Machine Operator to oversee the use of our computer numerical control machines. In this position, your primary responsibility is to program the machine to automatically produce metal parts for our manufacturing team.Duties and ResponsibilitiesRead blueprints for the needed partsInspect the metal pieces for...

  • Operator II

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund Company: Take Care of Each...

  • Operator III

    2 weeks ago

    Ontario, United States The Gund Company Full time

    Job DescriptionJob DescriptionDescription:OverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we...

  • Operator III

    3 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-time Description Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund...

  • Operator II

    2 weeks ago

    Ontario, United States The Gund Company Full time

    Job DescriptionJob DescriptionDescription:OverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we...

  • Operator II

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-time Description Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund...

  • CNC Machine Operator

    2 weeks ago

    Ontario, United States HM Quality Machining Inc. Full time

    Job DescriptionJob DescriptionWe are seeking a skilled CNC Operator to join our team. The ideal candidate will have experience in operating CNC machines and possess a strong understanding of machining processes.Duties:- Operate CNC machines such as HAAS milling machines and HAAS lathe machines- Read and interpret blueprints to determine the necessary...

  • CNC Machine Operator

    2 weeks ago

    Ontario, United States HM Quality Machining Inc. Full time

    Job DescriptionJob DescriptionWe are seeking a skilled CNC Operator to join our team. The ideal candidate will have experience in operating CNC machines and possess a strong understanding of machining processes.Duties:- Operate CNC machines such as HAAS milling machines and HAAS lathe machines- Read and interpret blueprints to determine the necessary...

  • CNC Set Up Operator

    1 month ago

    Ontario, United States Integrity Tool Inc Full time

    Job DescriptionJob DescriptionWe are looking for a competent CNC Operator to use computer numerically controlled (CNC) machinery safely and accurately to perform a variety of functions. Your job is important since some materials are not easy to shape or handle manually or with conventional equipment. CNC Operators are highly skilled professionals, able to...

  • CNC Machine Operator

    1 week ago

    Ontario, United States HM QUALITY MACHINING INC Full time

    Job Overview: **Duties**: - Operate CNC machines such as HAAS milling machines and HAAS lathe machines - Read and interpret blueprints to determine the necessary machining operations - Use precision measuring instruments like micrometers to ensure accuracy - Perform quality checks on finished products to meet specifications *IMPORTANT* - Maintain a clean...

  • Machinist

    1 month ago

    Ontario, United States Carl Zeiss Inc Full time

    Job DescriptionJob DescriptionJob DescriptionEssential Duties and ResponsibilitiesOperate 1PC and 3PC Machining Cell using lathe, mill and drill combination safely and efficiently. Consistently meet quality and daily shift outputs. Keep the machining cell clean and organized. Maintain minimum average yield of 90% at Pre-Tumbling. Complete understanding of...