See more Collapse

CNC Milling Machinist

1 month ago

Ontario, United States Hera Technologies LLC Full time
Position: CNC Milling Machinist - 2nd Shift

Job Description

Summary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer knowledge and be a self-starter who pays attention to detail and accuracy and takes responsibility for their work. The successful candidate will be responsible for producing machined parts by setting up and operating mills and/or lathes, maintaining quality and safety standards, keeping accurate records, maintaining equipment and other duties as assigned.

FLSA Classification Hourly Non-Exempt

Type: Full-time

Salary Range: $25.00 - $30.00 USD per hour

Hours: Monday through Friday, 2:00pm to 10:30pm

Reports to: Machine Shop Manager

Location: 100% onsite at 1055 E. Francis, Ontario, CA 91761

Essential Job Duties (which include, but not limited to):
  • Set up and operate machines to produce parts by using work orders, blueprints, materials, and specifications.
  • Interpret job instructions such as CNC program, setup sheet, tool list, job routing, part drawings and in-process quality instructions.
  • Locate the appropriate tool holders, tools and fixtures, and load them into the machine.
  • Load the CNC program into the machine control including zero and reference points and enter tool length and offsets.
  • Determine how fast to feed the work piece into the machine and how much material to remove.
  • Ensure that the work piece is properly lubricated and cooled.
  • Set up and inspect parts.
  • Keep work area clean and organized.
  • Adhere to Hera Safety protocols and OSHA/Cal OSHA safety regulations.
  • Maintain compliance with Company policies.
  • Suggest and help implement cost reductions and quality improvements.
  • Provide recommendations to improve productivity, equipment utilization, and identify best use of equipment and tooling accordingly.
  • Set up preliminary runs to verify accuracy and provide feedback for process improvements, inclusive of machining 1st Article parts and making offset and/or work with team to program modifications based on inspection results.
  • Perform equipment preventative maintenance actions and document actions regularly.
  • Support 5-S and adhere to health, safety, and environmental company guidelines.
  • Perform cross-functional operations.
Minimum Requirements:
  • High school diploma or general education diploma (GED).
  • Five (5) years' experience with 3-5 axis HAAS and Thermwood machines.
  • Five (5) years' experience in CNC lathe machining.
  • Five(5) years' experience in mill machining or related experience.
  • Ability to read and interpret complex blueprints.
  • Knowledge of a variety of cutting tools.
  • Knowledge of CNC HAAS, Fanuc, and OKK controls.
  • Ability to read and interpret documents such as work orders.
  • Ability to work with shop math.
  • Ability to use standard measuring tools (i.e. micrometers, calipers).
  • Ability to communicate effectively in oral and written English.
  • Ability to learn to perform cross-functional operations.
Preferred Requirements:
  • Experience with 3-5 axis machining of metallics, composites, honeycomb and plastics preferred.
  • Experience with conventional mill, lathes, and surface grinders.
  • Ability to fabricate fixtures.
Work authorization and Clearances:
  • Must be authorized to work in the US.
  • Must be willing to undergo a criminal background check.
  • Must be able to pass a physical examination, including an alcohol and drug test.
Work environment:
  • Machinists spend most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.
  • It is a professional work atmosphere, everyone from top managers to employees holds themselves accountable to their actions.
  • It is a workplace environment where people are respectful, competent, and work together to meet their expectations.
  • It is an open work culture in which no one feels excluded in whatever is going on within the workplace. People are not afraid to talk and are very supportive of each other.
  • It is a rewarding working environment where managers make the effort to show gratitude to those who work hard.
Physical Requirements:
  • Use their hands to handle, control, or feel objects, tools, or controls.
  • Stand for long periods of time.
  • Repeat the same movements.
  • Bend or twist their body.
  • The employee must regularly lift and/or move up to 40 pounds and occasionally lift/or move up to 50 pounds.
Hera Technologies, LLC Company Profile:

Hera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial Airline industries. We are a team of talented, ethical and motivated individuals committed to providing our customers with superior quality products delivered on time and aimed to exceed customer expectations. We provide a safe and rewarding work environment that acknowledges individual achievement and promotes entrepreneurial spirit, and teamwork.

Hera Technologies, LLC specializes in CNC machining, knife cutting, laser cutting, structural bonding and painting, processing and kitting of a wide variety of metallic, and engineered materials. Our CNC work centers, high-speed routing machines and knife cutting systems offer 2D cutting and 3, 4 and 5-axis milling of a wide range of materials including: single-ply materials, composites, honeycomb core, plastics, ferrous and non-ferrous metals.

Benefits:
  • Company paid employee medical, dental and vision insurance
  • Retirement plan option upon eligibility
  • Paid Sick Leave
  • Paid Vacation
  • 10 paid holidays
  • Tuition reimbursement
  • Discretionary bonuses
  • Incentivized cash-based employee referral program
Hera Technologies, LLC is proud to be an Equal Opportunity Employer. We maintain a workplace free of violence and drugs. We retain the option to perform substance abuse testing before and during employment.
  • Must be willing to undergo a criminal background check.
  • Must be able to pass a pre-employment physical examination, including a drug and alcohol test.

We have other current jobs related to this field that you can find below

  • CNC Milling Machinist

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: CNC Milling Machinist - 2nd ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Milling Machinist to join its team working in a hands-on, collaborative environment. The candidate must be familiar with working a AS9100 manufacturing environment, have working computer...

  • 2nd Shift

    2 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: 2nd Shift -CNC Router Machinist/OperatorJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • 2nd Shift

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: 2nd Shift -CNC Router Machinist/OperatorJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • CNC Router Machinist/Operator

    2 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: Router Machinist/Operator - 1st ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • CNC Router Machinist/Operator

    4 weeks ago

    Ontario, United States Hera Technologies LLC Full time

    Job DescriptionJob DescriptionPosition: Router Machinist/Operator - 1st ShiftJob DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer...

  • Machinist

    2 weeks ago

    Ontario, United States Carl Zeiss Inc Full time

    Job DescriptionJob DescriptionJob DescriptionEssential Duties and ResponsibilitiesOperate 1PC and 3PC Machining Cell using lathe, mill and drill combination safely and efficiently. Consistently meet quality and daily shift outputs. Keep the machining cell clean and organized. Maintain minimum average yield of 90% at Pre-Tumbling. Complete understanding of...

  • Machinist

    4 weeks ago

    Ontario, United States Carl Zeiss Inc Full time

    Job DescriptionJob DescriptionJob DescriptionEssential Duties and ResponsibilitiesOperate 1PC and 3PC Machining Cell using lathe, mill and drill combination safely and efficiently. Consistently meet quality and daily shift outputs. Keep the machining cell clean and organized. Maintain minimum average yield of 90% at Pre-Tumbling. Complete understanding of...

  • cnc machinist- level c- level a

    2 weeks ago

    Ontario, California, United States JCM Engineering Corp. Full time

    Job DescriptionJob DescriptionJCM Engineering Corp. is a leading manufacturer of computerized precision machine components for the aerospace, defense and commercial industries and is located in Ontario, California.JCM has continued a pattern of successful growth through entrepreneurial spirit, superior products, dependability and excellent service to its...

  • CNC Operator

    4 weeks ago

    Ontario, United States PeopleReady Full time

    Job DescriptionCNC OperatorPeopleReady of Ontario, NY is now hiring CNC Operators! People Ready is looking for a Multi Axis Lathe Machinist. In this role you will manufacture tight tolerance Aerospace and Space components in a variety of materials including the latest exoctic alloys. You will be apart of a skilled and growing team pushing the limits of...

  • CNC Operator

    2 weeks ago

    Ontario, New York, United States PeopleReady Full time

    Job DescriptionCNC OperatorPeopleReady of Ontario, NY is now hiring CNC Operators People Ready is looking for a Multi Axis Lathe Machinist. In this role you will manufacture tight tolerance Aerospace and Space components in a variety of materials including the latest exoctic alloys. You will be apart of a skilled and growing team pushing the limits of...

  • CNC Machine Operator

    2 weeks ago

    Ontario, United States HM Quality Machining Inc. Full time

    Job DescriptionJob DescriptionWe are seeking a skilled CNC Operator to join our team. The ideal candidate will have experience in operating CNC machines and possess a strong understanding of machining processes.Duties:- Operate CNC machines such as HAAS milling machines and HAAS lathe machines- Read and interpret blueprints to determine the necessary...

  • CNC Machine Operator

    2 weeks ago

    Ontario, United States HM Quality Machining Inc. Full time

    Job DescriptionJob DescriptionWe are seeking a skilled CNC Operator to join our team. The ideal candidate will have experience in operating CNC machines and possess a strong understanding of machining processes.Duties:- Operate CNC machines such as HAAS milling machines and HAAS lathe machines- Read and interpret blueprints to determine the necessary...

  • CNC Machine Operator

    2 weeks ago

    Ontario, United States HM QUALITY MACHINING INC Full time

    Job Overview: **Duties**: - Operate CNC machines such as HAAS milling machines and HAAS lathe machines - Read and interpret blueprints to determine the necessary machining operations - Use precision measuring instruments like micrometers to ensure accuracy - Perform quality checks on finished products to meet specifications *IMPORTANT* - Maintain a clean...

  • CNC Machinist/Programmer

    4 weeks ago

    Ontario, United States Hinson Enterprises Full time

    Job DescriptionJob DescriptionWe are seeking a CNC Machine Operator to oversee the use of our computer numerical control machines. In this position, your primary responsibility is to program the machine to automatically produce metal parts for our manufacturing team.Duties and ResponsibilitiesRead blueprints for the needed partsInspect the metal pieces for...

  • Operator III

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-timeDescriptionOverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do!The Gund...

  • Operator II

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund Company: Take Care of Each...

  • Operator II

    2 weeks ago

    Ontario, United States The Gund Company Full time

    Job DescriptionJob DescriptionDescription:OverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we...

  • Operator II

    4 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-time Description Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund...

  • Operator III

    2 weeks ago

    Ontario, United States The Gund Company Full time

    Job DescriptionJob DescriptionDescription:OverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we...

  • Operator III

    3 weeks ago

    Ontario, United States The Gund Company Full time

    Job Type Full-time Description Overview Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund...