CNC Programmer/Machinist

4 months ago

Grand Haven, United States RAMI Full time
Job Description

JOB SUMMARY

Program computer numerical control (CNC) and set up and operate horizontal or vertical CNC machining center.

GENERAL EMPLOYMENT REQUIREMENTS
• High school diploma or GED required.
• 4yrs Minimum experience setting up and operation of CNC Lathe or CNC Mill
• Programming experience a plus
• Adherence to personal protection requirements (safety glasses, etc.)
• Adherence to company general policies and quality procedures.
• Ability to work effectively both independently and as part of a team.
• Ability to work well under pressure and meet tight deadlines.

SPECIFIC JOB FUNCTIONS

Following are some of the principal job functions. However, other duties and activities may be required in performance of this job:
• Work from part prints and process sheets to plan sequence of operations.
• Select proper work holding jigs, fixtures and other devices.
• Select proper cutting, knurling, burnishing and other tooling.
• Determine proper speeds and feeds and set machine accordingly.
• Be able to make normal machine shop mathematical calculations and use shop tables and data.
• Use precision measuring equipment and fixed and adjustable gauging equipment.
• Load and unload machine for each production cycle.
• Make on-going machine adjustments to hold tolerance, based on tool wear, machine drift or part variability.
• Measure parts produced to maintain required quality and maintain required quality recordings.
• Perform basic machine maintenance, e.g.; oils and lubes, machine wear adjustments, replace wear items such as V-belts, etc.
• Clean machine of chips, splashed oil and other debris at end of shift or when a machine job is finished during shift.
• Set up and operate one or several CNC (computer numerical control) machines. A CNC Operator performs all the job functions of a production machinist and also programs CNC Machines. The CNC duties involve:
• Working from process sheet, part print or program steps supplied by Engineering, write the program to machine a workpiece and enter this program into the machine control.
• Verify the newly prepared program will properly machine the workpiece, prior to running production.
• Programming involves determining dimensional coordinates, sequence of operations, tools to be used, tool and workpiece fixtures required, machine speeds and feeds and using the proper codes and protocol, enter this program into the machine control.

PHYSICAL JOB REQUIREMENTS
• Ability to lift up to 50 lbs. with no restrictions.
• Healthy wrist-arm motion - repetitive motion of arms and shoulders.
• Ability to work with coolants, oils, and raw materials (various metals) without allergic reactions.
• Good hand/eye coordination.
• Ability to read process sheets and parts prints.
• Flexibility to work at various machine stations as production mix changes.
• Ability to use precision measuring equipment.
• Most machine jobs are standing jobs.
• Vision, with or without correction, must be adequate to perform the required job functions.

WORK ENVIRONMENT

This job operates in a manufacturing environment. The employee is occasionally exposed to a variety of extreme conditions. The noise level in the work environment can be loud.

R.A. Miller Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity, height, weight, or any other characteristic protected by applicable federal, state, or local laws.

  • CNC Machinist/Programmer

    4 weeks ago

    Grand Ledge, Michigan, United States Spark Talent Inc Full time

    Job DescriptionSpark Talent Inc is seeking a highly skilled CNC Machinist/Programmer to join our team. The successful candidate will be responsible for machining from blueprints and schematics, performing advanced setup operations, and operating CNC machines to perform complex series of machining operations.Key Responsibilities:Performing advanced setup...

  • CNC Programmer

    4 weeks ago

    Grand Rapids, Michigan, United States Jobot Full time

    CNC Programmer Job DescriptionWe are seeking a highly skilled CNC Programmer to join our dynamic team at Jobot. As a CNC Programmer, you will be responsible for developing, testing, and optimizing CNC programs using MasterCam software to drive efficiency and productivity in our manufacturing process.Key Responsibilities:Develop and modify CNC programs for 3,...

  • CNC Machinist Specialist

    3 weeks ago

    Grand Rapids, Minnesota, United States Sterling Engineering Inc. Full time

    Job DescriptionAt Sterling Engineering Inc., we're seeking a skilled CNC Machinist Specialist to join our team. As a CNC Machinist Specialist, you'll be responsible for operating and setting up Mori Seiki CNC Lathes with Fanuc controls, ensuring accurate and efficient production of high-quality parts.Key ResponsibilitiesOperate and set up Mori Seiki CNC...

  • CNC Programmer

    4 weeks ago

    Grand Rapids, Michigan, United States Jobot Full time

    Job Opportunity: CNC ProgrammerWe are seeking a highly skilled CNC Programmer to join our dynamic team at Jobot. As a key member of our engineering department, you will be responsible for developing, testing, and optimizing CNC programs using MasterCAM software to drive efficiency and productivity in our manufacturing process.Key Responsibilities:Develop and...

  • CNC Programmer

    4 weeks ago

    Grand Rapids, Michigan, United States Jobot Full time

    Job SummaryWe are seeking a highly skilled CNC Programmer to join our dynamic team at Jobot. As a key member of our engineering department, you will be responsible for developing, testing, and optimizing CNC programs using MasterCam software to drive efficiency and productivity in our manufacturing process.Key ResponsibilitiesDevelop and modify CNC programs...

  • CNC Programmer Specialist

    3 weeks ago

    Grand Rapids, Michigan, United States Jobot Full time

    Job Summary:We are seeking a highly skilled CNC Programmer to join our dynamic team at Jobot. As a CNC Programmer, you will be responsible for developing, testing, and optimizing CNC programs using MasterCam software for 3, 4, and 5 axis CNC machines. Your primary function will be to drive efficiency and productivity in our manufacturing process.Key...

  • CNC Machinist Specialist

    3 weeks ago

    Grand Haven, Michigan, United States RAMI Full time

    Job SummaryAs a CNC Programmer/Machinist at RAMI, you will be responsible for setting up and operating horizontal or vertical CNC machining centers. Your primary goal will be to program and operate these machines to produce high-quality parts.Key ResponsibilitiesWork from process sheets and part prints to plan the sequence of operations.Select the proper...

  • CNC Programmer

    3 weeks ago

    Grand Rapids, Michigan, United States Jobot Full time

    CNC Programmer Job DescriptionWe are seeking a highly skilled CNC Programmer to join our dynamic team at Jobot. As a CNC Programmer, you will be responsible for developing, testing, and optimizing CNC programs using MasterCam to drive efficiency and productivity in our manufacturing process.Key Responsibilities:Develop, test, and modify CNC programs using...

  • CNC Machinist Position

    2 weeks ago

    Grand Haven, Michigan, United States Aerotek Full time

    About the JobThis is an exciting opportunity for a highly skilled CNC Machinist to join our team at Aerotek. As a CNC Machinist, you will be responsible for setting up and operating conventional, special purpose, and CNC Machining Centers to ready machines for fabricating metallic and nonmetallic parts.Key Responsibilities:Set up and operate CNC machines on...

  • CNC Machinist Position

    4 weeks ago

    Grand Haven, Michigan, United States Aerotek Full time

    Job OverviewAerotek is seeking a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for setting up and operating conventional, special purpose, and CNC Machining Centers to ready machines for fabricating metallic and nonmetallic parts.Key Responsibilities:Set up and operate CNC machines on trial runs to verify accuracy of...

  • CNC Machinist Specialist

    4 weeks ago

    Grand Rapids, Minnesota, United States Sterling Engineering Inc. Full time

    Job OverviewAs a CNC Lathe Machinist at Sterling Engineering Inc., you will be responsible for operating and setting up Mori Seiki CNC Lathes with Fanuc controls. This role offers an exceptional earning potential, with the chance to earn well over $100,000 annually through abundant overtime opportunities.Key Responsibilities:* Operate and set up Mori Seiki...

  • CNC Machinist

    4 weeks ago

    Grand Haven, Michigan, United States Aerotek Full time

    Aerotek Job OpportunityWe are seeking a skilled CNC Machinist to join our team at Aerotek. As a key member of our production team, you will be responsible for operating machinery, performing maintenance, and monitoring output.Key Responsibilities:Operate CNC machinery to produce high-quality partsPerform routine maintenance and troubleshooting to ensure...

  • CNC Machinist II

    3 weeks ago

    Grand Haven, Michigan, United States Cadrex Full time

    Job SummaryCadrex is seeking a skilled CNC Machinist II to join our manufacturing team. As a CNC Machinist II, you will play a crucial role in our manufacturing operations by efficiently operating and maintaining CNC machinery.This position requires a solid understanding of CNC operations, the ability to perform complex setups, troubleshoot issues, and...

  • CNC Machinist

    4 days ago

    Grand Haven, United States Aerotek Full time

    Job DescriptionJob DescriptionCNC MachinistAll ShiftsMill or LatheSpring Lake or Grand Haven, MI$22/hr-$28/hr+ (based on experience)Job Description: CNC Machinists to set up and operate conventional, special purpose, and CNC Machining Centers to ready machines to fabricate metallic and nonmetallic parts. May assign personnel to various duties. All shift are...

  • CNC Machinist

    2 months ago

    Grand Haven, United States Aerotek Full time

    Job DescriptionJob DescriptionCNC MachinistAll ShiftsMill or LatheGrand Haven, MI$22/hr-$28/hr+ (based on experience)Job Description: CNC Machinists to set up and operate conventional, special purpose, and CNC Machining Centers to ready machines to fabricate metallic and nonmetallic parts. May assign personnel to various duties. All shift are open as of now...

  • CNC Machinist

    4 weeks ago

    Grand Haven, Michigan, United States Aerotek Full time

    Job SummaryAerotek is seeking a skilled CNC Machinist to join our team in Grand Haven, MI. As a CNC Machinist, you will be responsible for setting up and operating conventional, special purpose, and CNC Machining Centers to fabricate metallic and nonmetallic parts.Key Responsibilities:Set up and operate CNC machines to verify accuracy of machine settings or...

  • CNC Machinist

    4 weeks ago

    Grand Haven, Michigan, United States Aerotek Full time

    Job Title: 3rd Shift CNC Machinist LatheWe are seeking a skilled CNC Machinist to join our team on the 3rd shift (Sunday to Thursday, 11:00 PM to 7:00 AM) at our Grand Haven, Michigan facility. This is a contract-to-hire opportunity with a duration of 6 months.Key Responsibilities:Operate CNC machines to produce production parts and assembliesOperate manual...

  • CNC Lathe Machinist

    2 months ago

    Grand Haven, United States Aerotek Full time

    Job DescriptionJob DescriptionCNC MachinistGrand Haven, MI$22/hr-$26+/hrJob Description: CNC Machinists to set up and operate conventional, special purpose, and CNC Machining Centers to ready machines to fabricate metallic and nonmetallic parts. May assign personnel to various duties. All shift are open as of now minimal overtime required. Must be able to...

  • CNC Programmer

    4 weeks ago

    Winter Haven, Florida, United States VULKAN Group Full time

    Job Title: CNC CAM ProgrammerAt VULKAN Group, we are seeking a highly skilled CNC CAM Programmer to join our team. As a key member of our production team, you will be responsible for producing high-quality CAM packages and CNC programs for close tolerance components.Responsibilities:Develop and maintain CAM packages and CNC programs for...

  • CNC Machinist

    1 month ago

    Grand Rapids, Michigan, United States Aerotek Full time

    Job SummaryAerotek is seeking a skilled CNC Machinist to join our team in the HMPT department, where you will be responsible for operating 3 or 5 Axis CNC mills or lathes to produce complex parts for the defense industry.Key ResponsibilitiesSet up and operate CNC machines to produce high-quality parts within tight tolerances.Perform first piece, in-process,...