Materials Engineer
2 weeks ago
The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion - prone items, and works closely with the Non-Metallic Materials Engineering Lab on coatings tests. Primary responsibilities include: construction support, consisting of providing Trades clarification of coatings requirements with deck-plate evaluation as required; providing disposition to Engineering Reports and Vendor Information Requests; drawing development / coating selection and producing detailed paint application procedures (mechanical components). Additionally, develop Laboratory test plans for evaluation of new coating methods and materials. Occasionally perform forensic analysis of coatings failures.
Qualifications
Required:
- Bachelor of Science Degree in Mechanical Engineering, Materials Engineering or Chemical Engineering.
- Internal candidates must be from an department outside of the Operations organization (Casciano/Gabriel)
Preferred:
- NACE (coating inspector) Level I certification or NAVSEA equivalent training.
Skills
- Sound problem solving ability
- Ability to communicate effectively
- Good technical writing skills
- Working knowledge of data analysis and statistical principals
- Ability to multitask in a dynamic environment
Physical Qualifications
Climbing, Color Vision, Crawling, Kneeling, Stooping
Environmental Attributes
Cold, Dry, Hot, Inside, Noise, Outside
-
Materials Engineer
15 hours ago
Groton, United States General Dynamics Electric Boat Full timeOverview: The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion prone items, and works closely with...
-
Materials Engineer
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverview The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion - prone items, and works closely with...
-
Materials Engineer
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverview: The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion prone items, and works closely with...
-
Materials Engineer
2 weeks ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion – prone items, and works closely...
-
Welding/ Materials Engineer- Design Support
4 weeks ago
Groton, Connecticut, United States General Dynamics Electric Boat Full timeOverview: As the subject matter experts at Electric Boat for welding and brazing, welding engineering services is involved in all aspects of submarine design and construction. Design Support: The candidate's responsibilities will include participating in multi-discipline design-build teams to develop designs that are sound from a materials and...
-
Engineer - Structural
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational simulation (finite...
-
Experienced Engineer
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Engineer - Structural
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational...
-
Engineer - Structural
2 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational simulation (finite...
-
Experienced Engineer
4 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Engineer I/II
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Experienced Engineer
1 week ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine...
-
Structural Mechanics Engineer Scientist
5 days ago
Groton, United States Ed Wallach Search Group Full timeLocation: Groton, CT Security Clearance: US Citizen/Clearable We are looking for a highly motivated mid-level engineer with either a Bachelors or Master's degree in mechanical, civil, or aerospace engineering and 3+ years of experience among the fields of structural mechanics, stress analysis, structural design, material modeling, or shock analysis and...
-
D493 Structural Engineer
5 days ago
Groton, United States BuildSubmarines.com Full timeOverview D493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
D493 Structural Engineer
7 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
D493 Structural Engineer
1 week ago
Groton, United States General Dynamics Electric Boat Full timeOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
Engineer Supervisor
1 week ago
Groton, United States BuildSubmarines.com Full timeOverview D471 Commissioned Ships Mechanical Engineering requires an Engineering Supervisor to lead a group of reactor plant structural engineers who provide technical, design and life cycle support to commissioned submarines in the Reactor Plant Planning Yard (RPPY). This group is responsible for reactor plant systems on LOS ANGELES, OHIO, SEAWOLF, and...
-
Engineer I/II
4 days ago
Groton, United States General Dynamics Electric Boat Full timeOverview Department 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Structural Mechanics Engineer Scientist
1 week ago
Groton, United States Ed Wallach Search Group Full timeLocation: Groton, CT Security Clearance: US Citizen/Clearable We are looking for a highly motivated mid-level engineer with either a Bachelors or Master's degree in mechanical, civil, or aerospace engineering and 3+ years of experience among the fields of structural mechanics, stress analysis, structural design, material modeling, or shock analysis and...
-
Engineer I/II
1 week ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine...