Materials Engineer
2 weeks ago
Overview:
The Non-Metallic Materials Engineering (D343) Preservation and Coatings Group is cognizant of everything related to surface preparation and painting requirements for construction of nuclear submarines. This group develops the Non-Propulsion Paint Schedule drawing requirements, performs design review of corrosion
prone items, and works closely with the Non-Metallic Materials Engineering Lab on coatings tests.
Primary responsibilities include: construction support, consisting of providing Trades clarification of coatings requirements with deck-plate evaluation as required; providing disposition to Engineering Reports and Vendor Information Requests; drawing development / coating selection and producing detailed paint application procedures (mechanical components).
Additionally, develop Laboratory test plans for evaluation of new coating methods and materials.
Occasionally perform forensic analysis of coatings failures.
Qualifications:
Required:
Bachelor of Science Degree in Mechanical Engineering, Materials Engineering or Chemical Engineering.
Internal candidates must be from an department outside of the Operations organization (Casciano/Gabriel)
Preferred:
NACE (coating inspector) Level I certification or NAVSEA equivalent training.
Skills:
Sound problem solving ability
Ability to communicate effectively
Good technical writing skills
Working knowledge of data analysis and statistical principals
Ability to multitask in a dynamic environment
Physical Qualifications:
Climbing, Color Vision, Crawling, Kneeling, Stooping
Environmental Attributes:
Cold, Dry, Hot, Inside, Noise, Outside
#J-18808-Ljbffr
-
Groton, United States Electric Boat Company Full timeOverview This position is in the Electric Boat Welding Engineering Laboratory and scales to accommodate a wide range of experience levels (entry to career experience). This position involves investigating and solving a complex variety of metallurgical welding issues related to welding process, procedures, and engineering of welding controls, techniques, and...
-
Groton, United States General Dynamics Electric Boat Full timeOverview: This position is in the Electric Boat Welding Engineering Laboratory and scales to accommodate a wide range of experience levels (entry to career experience). This position involves investigating and solving a complex variety of metallurgical welding issues related to welding process, procedures, and engineering of welding controls, techniques, and...
-
Engineer - Structural
4 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational simulation (finite...
-
Experienced Engineer
4 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Engineer - Structural
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational...
-
Engineer - Structural
2 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Solid Mechanics department of Electric Boat is recognized among the Navy Community for its structural analysis expertise, and its ability to enact innovative and practical solutions to the most challenging problems. Engineers in Solid Mechanics apply their knowledge of engineering mechanics, state-of-the-art computational simulation (finite...
-
Experienced Engineer
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
Engineer I/II
4 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
D493 Structural Engineer
4 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
D493 Structural Engineer
3 weeks ago
Groton, United States BuildSubmarines.com Full timeOverview D493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
D493 Structural Engineer
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
D493 Structural Engineer
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...
-
Structural Mechanics Engineer Scientist
3 weeks ago
Groton, United States Ed Wallach Search Group Full timeLocation: Groton, CT Security Clearance: US Citizen/Clearable We are looking for a highly motivated mid-level engineer with either a Bachelors or Master's degree in mechanical, civil, or aerospace engineering and 3+ years of experience among the fields of structural mechanics, stress analysis, structural design, material modeling, or shock analysis and...
-
D493 Structural Engineer
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities...
-
Engineer I/II
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeOverviewDepartment 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in the...
-
D493 Structural Engineer
3 weeks ago
Groton, United States General Dynamics Electric Boat Full timeJob DescriptionOverviewD493 - Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities...
-
Structural Mechanics Engineer Scientist
3 weeks ago
Groton, United States Ed Wallach Search Group Full timeLocation: Groton, CT Security Clearance: US Citizen/Clearable We are looking for a highly motivated mid-level engineer with either a Bachelors or Master's degree in mechanical, civil, or aerospace engineering and 3+ years of experience among the fields of structural mechanics, stress analysis, structural design, material modeling, or shock analysis and...
-
Groton, United States Ed Wallach Search Group Full timeWe are looking for a highly motivated mid-level engineer with either a Bachelors or Master's degree in mechanical, civil, or aerospace engineering and 3+ years of experience among the fields of structural mechanics, stress analysis, structural design, material modeling, or shock analysis and testing. Experience supporting research, development, engineering...
-
Electromagnetics Engineer
4 days ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Electromagnetics group is seeking electrical engineering candidates in the areas of Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD) Control. Responsibilities of the group include analysis of electromagnetic coupling and potential electromagnetic interference (EMI) problems on submarine systems, electromagnetic compatibility...
-
Electromagnetics Engineer
1 month ago
Groton, United States General Dynamics Electric Boat Full timeOverviewThe Electromagnetics group is seeking electrical engineering candidates in the areas of Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD) Control. Responsibilities of the group include analysis of electromagnetic coupling and potential electromagnetic interference (EMI) problems on submarine systems, electromagnetic compatibility...