PRODUCTION CONTROLLER

3 weeks ago


Jacksonville FL United States Department of Defense Full time
Duties
• You will serve as a Planner and Estimator for US Naval ships.
• You will write technical work specifications in various shop trades including structural, mechanical, ordnance, electrical, electronics, and piping.
• You will be the liaison with Product shop supervisors to support fluctuating workload requirements through reallocation of resources.
• You will prepare and provide technical expertise over development of definitive Formal Work procedures (FWP).
• You will assist rotating military enlisted personnel with common training in the area of material procurement.
• You will prepare and provide technical expertise over development of Controlled Work Packages (CWP).
• You will plan ship repairs including areas of structural, mechanical, ordnance, electrical, electronics, boiler, piping, air conditioning and refrigeration.
• You will review and screen incoming work requests for completeness and applicability and determine the availability of resources to accomplish tasking at the Intermediate level.
• You will maintain workload assignments for all work assigned for prioritization and completion based upon departmental scheduled dates
Requirements Conditions of Employment
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level
This requirement is called time-in-grade
Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to successfully complete a pre-appointment physical examination.
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements
Overtime or night differential pay and/or unusual duty hours may be required
Qualifications To qualify for a GS-11 your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-10 grade level or pay band in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following:
• Experience troubleshooting, maintaining and repairing U.S
Navy ships.
• Experience developing work procedures and processes related to the ship repair industry.
• Experience using standardized estimating procedures for production and material costs.
• Experience planning ship repairs including the areas of structural, mechanical, ordnance, electrical, electronics, boiler, piping, air-conditioning and refrigeration.
• Experience using computers and software programs required such as Navy Enterprise Maintenance Automated Information System (NEMAIS) and Microsoft programs associated with the planning process
Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education No education substitution for the series/grade combination Additional information This position is covered by the Department of Defense Priority Placement Program
Additional vacancies may be filled by this announcement
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants
Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher
ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location
Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate
For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)
A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)
To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee
A relocation incentive may be authorized upon funding availability.
• Benefits Help A career with the U.S
government provides employees with a comprehensive benefits package
As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding
Opens in a new window Learn more about federal benefits
Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent
Contact the hiring agency for more information on the specific benefits offered
How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above
In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered
Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position
Therefore, we encourage you to be clear and specific when describing your experience
When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement
You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:
• ORAL COMMUNICATION
* PRODUCTION CONTROL
* PRODUCTION PLANNING
* PRODUCTION SCHEDULING
* PRODUCTION/COST ESTIMATING You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process
If selected, you may be required to provide supporting documentation
If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified
Please follow all instructions carefully
Errors or omissions may affect your rating or consideration for employment
All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement.
• Benefits Help A career with the U.S
government provides employees with a comprehensive benefits package
As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding
Opens in a new window Learn more about federal benefits
Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent
Contact the hiring agency for more information on the specific benefits offered.
• Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits
Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee
You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies
You are required to provide documentation that supports

  • Jacksonville, United States Tactical Air Support Full time

    Job DescriptionJob DescriptionTactical Air Support Inc.Production ControllerJacksonville FloridaSalary rate: $33.00- $40.00 hourly, DOEPosition SummaryTactical Air Support, Inc. is seeking an experienced Production Controller to provide daily oversight of all functional and operational activities of Production control. The Production Controller will provide...


  • Jacksonville, United States Tactical Air Support Full time

    Tactical Air Support Inc.Production Controller Jacksonville FloridaSalary rate: $33.00- $40.00 hourly, DOEPosition SummaryTactical Air Support, Inc. is seeking an experienced Production Controller to provide daily oversight of all functional and operational activities of Production control. The Production Controller will provide training oversight and...


  • Jacksonville, United States Prolog Inc. Full time

    Job DescriptionJob DescriptionThis is a 2nd Shift position (2:30pm-11:00pm)The employee shall compile and record production data for industrial establishments to compare records and reports on volume of production, consumption of material, QC, and other aspects of production. The employee shall perform any combination of the following duties: Compile and...


  • Jacksonville, United States Flightstar Jacksonville Full time

    Job DescriptionFLSA:Non- ExemptDepartment:Operations SupportJob Title:Production Control AssistantReports To:Production Control SupervisorDOT/ NON- DOT:Non-DOTSchedule:2nd shift, 3:30pm - 12:00amPosition SummaryThe Production Control Assistant (PCA) is a pivotal role within the workbooth operations.The PCA audits aircraft maintenance documentation both...


  • Decatur, IL, United States Align Production Systems Full time

    *SUMMARY*Detail electrical designs and put together Release Packages under the direction of an Electrical Engineer. Facilitates the completion of panel designs and implementation by performing the following duties, either personally or by sharing the assignment with Engineering Assistants.*ESSENTIAL DUTIES AND RESPONSIBILITIES* (other duties may be...

  • PRODUCT CONTROL

    3 weeks ago


    , NY, United States JPMorgan Chase Full time

    The product control function provides support to the financial controllers and trading desks to ensure that the P&L, balance sheet, and month end close procedures are done correctly and accurately.**Job Responsibilities**+ Production, preparation and reporting of the daily P&L and Risk+ Provide detailed analysis and reporting on the financials to desk heads,...

  • Product Control

    4 days ago


    Brooklyn, NY, United States JPMorgan Chase & Co. Full time

    JobID: 210504226 Category: Controller JobSchedule: Full time Posted Date: 2024-04-10T14:29:43+00:00 JobShift: Day Base Pay/Salary: Brooklyn,NY $123,500.00-$200,000.00 The product control function provides support to the financial controllers and trading desks to ensure that the P&L, balance sheet, and month end close procedures are done correctly and...

  • Product Control

    4 days ago


    Brooklyn, NY, United States JPMorgan Chase Full time

    The product control function provides support to the financial controllers and trading desks to ensure that the P&L, balance sheet, and month end close procedures are done correctly and accurately. **Job Responsibilities** + Production, preparation and reporting of the daily P&L and Risk + Provide detailed analysis and reporting on the financials to desk...

  • Controller

    7 days ago


    Jacksonville, United States Community Hospice of Northeast Florida Full time

    Jacksonville, FL 32257 Under the general direction of the CFO and VP of Finance, the Controller is responsible for the coordination of the activities of general accounting, decision support, payroll, accounts payable and non-patient billing services. The controller also has responsibility for the treasury function, as well as, ensuring that effective...

  • Controls Engineer

    7 days ago


    Jacksonville, United States Swisher International Full time

    DescriptionAs a Controls Engineer, you will perform a vital role in designing and developing systems for manufacturing operations. You may design layout, materials and information flow, or machine placement. You may also be responsible for increasing production efficiency by evaluating performance a...


  • Jacksonville, FL, United States Opterra Solutions Full time

    SummaryOpterra Solutions is looking to hire a Business Development Representative for our Product Sales division that can bring our lineup of Turf, IVM, Forestry, Aquatic, Agricultural, and Pest Control products to new markets and clients in the Jacksonville, FL area. This role will serve as the front-runner in identifying potential clients, understanding...

  • Controls Engineer

    1 week ago


    Jacksonville, United States Swisher Hygiene Full time

    As a Controls Engineer, you will perform a vital role in designing and developing systems for manufacturing operations. You may design layout, materials and information flow, or machine placement. You may also be responsible for increasing production efficiency by evaluating performance and proposing and implementing improvements. You will be responsible for...

  • Controls Engineer

    2 days ago


    Jacksonville, United States Swisher Hygiene Full time

    As a Controls Engineer, you will perform a vital role in designing and developing systems for manufacturing operations. You may design layout, materials and information flow, or machine placement. You may also be responsible for increasing production efficiency by evaluating performance and proposing and implementing improvements. You will be responsible for...

  • Controls Engineer

    3 days ago


    Jacksonville, United States Swisher Hygiene Full time

    As a Controls Engineer, you will perform a vital role in designing and developing systems for manufacturing operations. You may design layout, materials and information flow, or machine placement. You may also be responsible for increasing production efficiency by evaluating performance and proposing and implementing improvements. You will be responsible for...

  • Controls Engineer

    4 days ago


    Jacksonville, United States Swisher Hygiene Full time

    As a Controls Engineer, you will perform a vital role in designing and developing systems for manufacturing operations. You may design layout, materials and information flow, or machine placement. You may also be responsible for increasing production efficiency by evaluating performance and proposing and implementing improvements. You will be responsible for...


  • Jacksonville, United States Highlander Consultants Inc Defunct Full time

    Our client is a leading manufacturer in the Jacksonville market. We are committed to delivering high-quality products and innovative solutions to our customers. We are currently seeking a Controls Engineer to join our team. Job Description: As a Controls Engineer, you will be responsible for designing, developing, maintaining, and troubleshooting control...


  • Jacksonville, United States ICON Consultants, Inc. Full time

    Position Title: Quality Control Inspector Location: Jacksonville, Fl Pay Rate: $34.50/hr (+benefits) Assignment Length: 6-month W2 Contract Schedule: Mon-Fri (7am-330pm) Industry: Oil & GasJOB OVERVIEW Responsibilities Quality control inspectors check the quality of incoming and outgoing materials or products, as well as the production procedures. This job...


  • Jacksonville, United States Highlander Consultants Full time

    Our client is a leading manufacturer in the Jacksonville market. We are committed to delivering high-quality products and innovative solutions to our customers. We are currently seeking a Controls Engineer to join our team.Job Description:As a Controls Engineer, you will be responsible for designing, developing, maintaining, and troubleshooting control...


  • Jacksonville, United States Highlander Consultants Full time

    Our client is a leading manufacturer in the Jacksonville market. We are committed to delivering high-quality products and innovative solutions to our customers. We are currently seeking a Controls Engineer to join our team.Job Description:As a Controls Engineer, you will be responsible for designing, developing, maintaining, and troubleshooting control...


  • Jacksonville, United States Highlander Consultants Full time

    Our client is a leading manufacturer in the Jacksonville market. We are committed to delivering high-quality products and innovative solutions to our customers. We are currently seeking a Controls Engineer to join our team.Job Description:As a Controls Engineer, you will be responsible for designing, developing, maintaining, and troubleshooting control...