MECHANICAL ENGINEER with Security Clearance

Duties
• You will review and evaluate design drawings, material samples and material certifications provided by vendor.
• You will direct and advise other engineers and technicians in system designs and operating specifications.
• You will prepare and review technical correspondence, Task Group Instructions (TGIs), technical reports, job summaries, estimates, status reports, technical specifications, repair procedures and process instructions.
• You will coordinate with other engineers and technicians to ensure that all systems are covered
Requirements Conditions of Employment
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level
This requirement is called time-in-grade
Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators, and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g
fumes, dust, heat, ionizing and non-ionizing radiation and chemicals)
You will be required to participate in medical surveillance programs.
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements
Overtime or night differential pay and/or unusual duty hours may be required.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
You must be able to travel on military and commercial aircraft for extended periods of time.
• This is a bargaining unit position
Qualifications GS-11 Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following: - Experience providing expertise for major Mechanical engineering projects associated with the functional design, performance of various types of submarine weapon systems and components including Masts, Antennas, Towed Array and Periscopes
- Experience directing the planning, installation, and testing of equipment and systems involved during a ship's overhaul period
- Experience preparing and reviewing correspondence, such as Job Summaries, Task Group Instruments (TGI's), Deficiency Logs(DL's) Deficiency Reports (DR's), technical reports, estimates, status reports, instructions and procedures
- Experience in negotiating projects with managers and ship force support to gain approval and testing authority
GS-09 Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-07 grade level or pay band in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following: - Experience providing guidance for major Mechanical engineering projects associated with the functional design, performance of various types of submarine weapon systems and components including Masts, Antennas, Towed Array and Periscopes
- Experience directing the planning, installation, and testing of equipment and systems involved during a ship's overhaul period
- Experience preparing and reviewing correspondence, such as Job Summaries, Task Group Instruments (TGI's), Deficiency Logs(DL's) Deficiency Reports (DR's), technical reports, estimates, status reports, instructions and procedures
- Experience in negotiating projects with managers and ship force support to gain approval and testing authority
Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: Basic Requirements:
• Degree: Engineering
To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
OR
• Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering
The adequacy of such background must be demonstrated by one of the following:
• Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration
For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
• Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
• Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance
Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
(The above examples of related curricula are not all inclusive.) A transcript must be submitted with your application if qualifying using education
See Required Documents for additional information
Additional information This position is covered by the Department of Defense Priority Placement Program
Additional vacancies may be filled by this announcement
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants
Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined well qualified (WQ)
To receive priority consideration, the FPL must be the

---