MECHANICAL ENGINEER with Security Clearance

Duties * You will provide technical consultative services, review and approval of engineering studies and design change proposals, drawings, test procedures, technical manuals and other technical documentation. * You will be responsible for the resolution of technical issues under the cognizance of the SUPSHIP Bath Waterfront Chief Engineer. * You will review, evaluate and approve complex engineering data prepared by the shipbuilder, government design agent, or their subcontractors to assure compliance with the design specification * You will conduct technical evaluations and investigations into project and process problems which arise during the design, construction and overhaul of naval ships, applies risk management principles, as appropriate. * You will check for proper interpretation and application of specification criteria to ensure that analyses and recommendations are accurate and that conclusions and assumptions are sound. * You will prepare correspondence, technical and trip reports, memoranda, specification change notices, work instructions, contract field modification requests, and scope documents as required to complete project assignments. * You will review and evaluate changes to the shipbuilding or ship repair specifications to determine the impact of such changes on the system design, operation, construction schedule and cost. * You will provide technical support to Quality Assurance Specialists and Managers within the Quality Assurance Directorate as required. * You will identify and resolve problems that may arise during in-process inspection, test and trials. * You will review construction plans, vendor plans, systems diagrams, calculations, test procedures, technical manuals, purchase technical specifications, or other related documents such as factory acceptance or shipboard test results. Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov * Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. * Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. * Males born after 12-31-59 must be registered for Selective Service. * You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. * This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. * You may be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment. * You may be required to successfully complete a pre-appointment physical examination. * You may be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases. Qualifications For the GS-12 Grade Level: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-11) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer providing engineering guidance in the design, development, or testing issues of mechanical systems, subsystems, or components (e.g., HVAC, firefighting, main propulsion, auxiliary equipment, air conditioning/refrigeration, bleed air, fuel and lubricating oil piping, steering, compressed air, electronic cooling water, and other auxiliary piping systems) to ensure compliance with technical requirements in the construction, overhaul, or repair of surface ships or submarines. For the GS-11 Grade Level: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-09) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer conducting analysis in the design or development of mechanical systems, subsystems, or components (e.g., HVAC, firefighting, main propulsion, auxiliary equipment, air conditioning/refrigeration, bleed air, fuel and lubricating oil piping, steering, compressed air, electronic cooling water, and other auxiliary piping systems) to ensure compliance with technical requirements in the construction, overhaul, or repair of surface ships or submarines. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Additional information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualifie