Radio Frequency Technician

4 weeks ago

Sterling, United States SIMCO Electronics Full time

Position Overview


The Radio Frequency Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Radio Frequency Technician will identify and utilize appropriate manual and automated measurement procedures.


This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Radio Frequency Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Radio Frequency Technician may be asked to report opinions and interpretations.

Responsibilities and Duties

  • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
  • Working with a range of RF-enabled devices including cell phone antennas, amplifiers, two-way radios, satellite systems, and internet access points.
  • Troubleshooting circuits used in RF transmission independently and with site engineers.
  • Identifying and repairing faults in finished assemblies making adjustments as required.
  • Identifying the causes of faults and work with on-site teams to implement preventative measures so that they do not happen again.
  • Model creation, assembly, tuning, and plan development as well as modifying antenna prototypes, parts, and assemblies.
  • Maintaining documentation of test cases.
  • Performing routine antenna capability tests.
  • Maintain primary and/or intrinsic calibration standards
  • Maintain secondary and/or working calibration standards
  • Perform maintenance, troubleshooting and repair of precision equipment
  • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
  • Collect, compile, measure, summarize, and record data gathered during calibration.
  • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
  • Identify and correct measurement errors, as applicable
  • Prepare calibration reports and certificates
  • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used
  • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
  • Train subordinates in calibration concepts and procedures
  • Interact with other technicians, Customer Service Representatives, Account Managers, and customers
  • Other duties and responsibilities as may be assigned


Qualifications

  • Minimum High School diploma or equivalent
  • Must be able to perform general math and algebra functions
  • Understanding of Basic Statistics
  • Must possess good written and oral, communication skills
  • Technical writing ability
  • Intermediate ability to troubleshoot repair, align and optimize precision equipment
  • Intermediate computer skills
  • Proficient in use of MS Word and Excel
  • Minimum three years of calibration experience some of which can be offset with formal metrology training
  • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)
  • Must have great interpersonal and customer service skills
  • Strong attention to details
  • Must be a self-motivator, work as a team player, and follow written procedures

Physical Demands

  • Must be able to lift up to 45 pounds without assistance
  • Occasional standing and bending are required

Working Environment

Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites

Travel may be required to other domestic and possibly international locations

What We Offer

  • Full - Time, non-exempt position
  • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement
  • Vacation, sick and paid holidays

SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.

  • Radio Frequency Technician

    1 month ago

    Sterling, United States SIMCO Electronics Full time

    Position OverviewThe Radio Frequency Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure...

  • Digital Signal Processing

    2 weeks ago

    Sterling, United States Dedrone Holdings Inc. Full time

    Company Overview : Dedrone is the world’s most trusted smart airspace security company. Hundreds of commercial, government and military customers around the world rely on Dedrone’s comprehensive, command and control (C2) solution to protect against the persistent and escalating threat from drones while enabling “good” drones to fly. By leveraging...

  • Calibration Technician B

    2 weeks ago

    Sterling Heights, Michigan, United States Simco Electronics Full time

    The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/ Low Frequency, RF/ Microwave, Fluid Technician, Calibration, Mechanical, Customer Service, Measurement, Microwave, Manufacturing

  • Lead Irrigation Technician

    2 weeks ago

    Sterling, United States Nova Irrigation Full time

    Irrigation Technician, **Must speak fluent English** service clients sprinkler systems, experience in Hunter, Rainbird and other controllers. Knowledge in RP and PVB backflows, Knowledge in valves, pipe, wire, 2 wire systems. Knowledge in Hydrawise and Rachio controllers. Good with people and customer service, good at time and record keeping on a daily...

  • Lead Alarn Technician

    4 weeks ago

    Sterling, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Lead daily activities and assignments of Alarm Technician personnel, ensure alarm database entry and accuracy, run reports, and serve as primary point of contact for alarm maintenance and support issues.Essential Job Duties: Run reports from databases (RAMIV experience preferred); program Radionics® alarm...

  • Alarm Technician

    4 weeks ago

    Sterling, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Provide centrally managed technical support in the areas of alarm panel programming, diagnostic and service support, customer account support and support to contract field technicians.Essential Job Duties:Provide centrally managed technical support in the areas of alarm panel programming, diagnostic and...

  • Alarm Technician

    4 weeks ago

    Sterling, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Provide centrally managed technical support in the areas of alarm panel programming, diagnostic and service support, customer account support and support to contract field technicians.Essential Job Duties:Provide centrally managed technical support in the areas of alarm panel programming, diagnostic and...

  • Lead Alarn Technician

    3 weeks ago

    Sterling, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Lead daily activities and assignments of Alarm Technician personnel, ensure alarm database entry and accuracy, run reports, and serve as primary point of contact for alarm maintenance and support issues.Essential Job Duties:Run reports from databases (RAMIV experience preferred); program Radionics® alarm...

  • Lead Alarn Technician

    3 weeks ago

    Sterling, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Lead daily activities and assignments of Alarm Technician personnel, ensure alarm database entry and accuracy, run reports, and serve as primary point of contact for alarm maintenance and support issues.Essential Job Duties:Run reports from databases (RAMIV experience preferred); program Radionics® alarm...

  • Product Manager – Hardware

    3 weeks ago

    Sterling, United States Dedrone Full time

    Company Overview: Dedrone is the world's most trusted smart airspace security company. Hundreds of commercial, government and defense customers around the world rely on Dedrone's comprehensive, command and control (C2) solutions to protect against the persistent and escalating threat from drones while enabling “good” drones to fly. By leveraging AI/ML,...

  • Field Cabling Technician

    6 days ago

    Sterling, United States Concert Technologies Full time

    Concert Technologies, a telecommunications installation industry leader is looking to hire Field Cabling Technicians! This position is based in Dulles, VA, and installs various types of telecommunications equipment at Customer facilities. The ability to regularly travel to these locations is required. A company vehicle is provided for work-related...

  • Maintenance Technician

    2 weeks ago

    Sterling, United States Gates Hudson Full time

    The Maintenance Technician is responsible for physically maintaining the property including corrective and preventative maintenance measures on property equipment, fixtures, buildings and completing service requests in residences.The Maintenance Technician conducts all business in accordance with Gates, Hudson & Associates, Inc., established policies and...

  • Maintenance Technician

    2 weeks ago

    Sterling, United States Gates Hudson Full time

    The Maintenance Technician is responsible for physically maintaining the property including corrective and preventative maintenance measures on property equipment, fixtures, buildings and completing service requests in residences.The Maintenance Technician conducts all business in accordance with Gates, Hudson & Associates, Inc., established policies and...

  • RF Engineer/Specialist

    1 month ago

    Sterling Heights, Michigan, United States BAE Systems Full time

    Job Description BAE is looking for highly motivated people with experience in wireless and RF technologies to include experience operating various pieces of equipment used to detect, analyze and diagnose signal properties. This position requires: There are several positions open - both Mid and Senior level. The skills listed below are NOT required. We are...

  • Lead Alarn Technician

    4 weeks ago

    Sterling Heights, Michigan, United States Amentum Full time

    *Contingent upon contract award*Position Summary:Lead daily activities and assignments of Alarm Technician personnel, ensure alarm database entry and accuracy, run reports, and serve as primary point of contact for alarm maintenance and support issues.Essential Job Duties:Run reports from databases (RAMIV experience preferred); program Radionics alarm panels...

  • Production Operator

    4 weeks ago

    Sterling, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically...

  • Hardware Engineer

    2 days ago

    Sterling, United States Actalent Full time

    Description: The Hardware Engineer will be part of a small team focused on developing TAG’s growing portfolio of rugged GPS and Survey systems, rackmount PC’s, displays, small form factor and tablet computers. The Hardware Engineer assists in all phases of product lifecycle, from initial design through deployment and support. Typical duties...

  • Production Operator

    4 weeks ago

    Sterling, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Systems Engineer

    3 weeks ago

    Sterling, United States CACI International Inc Full time

    Systems EngineerJob Category: EngineeringTime Type: Full timeMinimum Clearance Required to Start: Top SecretEmployee Type: RegularPercentage of Travel Required: Up to 10%Type of Travel: Continental US* * * CACI is seeking a Systems Engineer to join a fast-paced counter-unmanned aircraft systems (C-UAS) mission that makes a difference to the Army warfighter...

  • Network Engineer

    1 month ago

    Sterling, United States The Swift Group Full time

    Job DescriptionJob DescriptionThe Swift Group is looking for an Experienced Network Engineer to join a technology-based program supporting a key government customer. This program will deliver engineering services for network infrastructure as well as sophisticated enterprise computing infrastructure including end-point devices, data center hosted servers,...