Aviation Safety Inspector

Found in: beBee jobs US - 3 weeks ago

Greensboro, North Carolina, United States Department Of Transportation Full time
Summary

Incumbent will serve as a Principal Operations Inspector at the Greensboro FSDO.

This is not a 100% telework position. Situational telework may be available based on the needs of the Office.



Duties

The Aviation Safety Inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

Some FG-14 assignments involve service wide responsibility for application of expert knowledge of flight operations for advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft.

ASIs at the FG-14 level establish technical procedures and performance indexes and review complete flight operations programs for leaders in the aviation industry, or organizations of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity.

FG-14 employees develop and evaluate flight operations programs for organizations which utilize the newest, most complex aircraft, systems, and equipment. Because of organizational complexity or technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy- setting level.

The ASI resolves all but unique problems, with the intervention of management or a technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems.

The ASI is expected to follow established laws, orders, policies, and regulations that provide general guidance for completing work objectives, but is allowed considerable discretion to develop new or innovative approaches. The ASI uses resourcefulness, initiative, and judgement based on experience to develop and implement evaluation procedures to address problems where precedents are not applicable. Methods, practices, or decisions may be used as guidance in similar problem areas.

The ASI keeps management informed of the status of all programs and projects and is held accountable for the technical accuracy, proper coordination, and timeliness of completed staff work. Provides staff assistance and serves as advisor to the manager on all matters pertaining to assigned tasking. Assists Safety Assurance ASI's, aviation safety technicians, and others on queries that are technical or guidance related.

Assists in the preparation of a variety of technical and high priority correspondence to the other functional offices, aviation industry, other governmental agencies, members of Congress, and the general public. Assures that correspondence is properly coordinated, technically and grammatically accurate, clear and concise, and that it reflects the philosophy, policies, and objectives of the Division, Service, and the FAA.

Participates in the FAA flight program to maintain qualification and currency requirements applicable to operations inspectors, for the purpose of supporting the FAA in a variety of flight-related functions to include training and evaluation of designated pilot examiners. Evaluates tasks contained in the FAA practical test standards and airman certification standards by participating as pilot in command or as a crewmember. The inspector is required to maintain an FAA second class medical.

Performs other duties as required.

  • Consumer Safety Inspector

    Found in: beBee jobs US - 2 weeks ago

    Greensboro, North Carolina, United States Department Of Agriculture Full time

    Summary $5,000 Sign on Bonus, Creditable Service for Annual Leave Accrual, Public Service Loan Forgiveness Program, and Referral Bonus Awards are available. Click Learn more about this agency below.Shifts and species will vary based on assignment. For add'l information call Heather Brown @ Employee may be detailed to any shift at any plant in the Jackson...

  • Electrical/Electro-Mechanical Technician

    2 weeks ago

    Greensboro, United States Aviation Company Full time

    Job DescriptionJob DescriptionA premier provider of quality component services to the aviation industry, is seeking an experienced electrical/electro-mechanical repair technician with a background in any of the following: electro-mechanics, electric motors, and pneumatics. Aviation/automotive experience a plus.RESPONSIBILITIES AND DUTIESTesting, disassembly,...

  • Airframe and Powerplant Technician II GSO-MRO

    Found in: Talent US C2 - 2 weeks ago

    Greensboro, United States Signature Aviation Full time

    Signature Aviation is a market leading global aviation services provider with over 220 locations and 6,000 employees worldwide. Eligible team members enjoy a wide array of benefits including health and welfare options, generous 401k match, paid time off, tuition assistance, and limitless opportunities for training and development.  The Airframe and...

  • Project Executive

    3 days ago

    Greensboro, United States Samet Full time

    Do you want to be part of a growing, well established, family friendly company? The Samet team provides a portfolio of diversified professional contracting services for construction of commercial/industrial, education, multi-family and medical/healthcare construction projects. Due to continued growth, Samet seeks a Project Executive, with experience in the...

  • Project Executive

    3 weeks ago

    Greensboro, United States Samet Corporation Full time

    Job DescriptionJob DescriptionDo you want to be part of a growing, well established, family friendly company?The Samet team provides a portfolio of diversified professional contracting services for construction of commercial/industrial, education, multi-family and medical/healthcare construction projects.Due to continued growth, Samet seeks a Project...

  • Operations Supervisor

    2 weeks ago

    Greensboro, United States TAT Technologies Full time

    Piedmont Aviation Component Services, a subsidiary of TAT Technologies, is looking for a qualified Operations Supervisor (Aviation Crew Chief). This position will oversee and perform services as described below. Possess extensive knowledge of Landing Gears and components. Perform at a high level of efficiency, decision making and energy. Possess Integrity as...

  • Operations Supervisor

    2 days ago

    Greensboro, United States TAT Technologies Full time

    Piedmont Aviation Component Services, a subsidiary of TAT Technologies, is looking for a qualified Operations Supervisor (Aviation Crew Chief). This position will oversee and perform services as described below. Possess extensive knowledge of Landing Gears and components. Perform at a high level of efficiency, decision making and energy. Possess Integrity as...

  • Insurance Field Inspector

    6 days ago

    Greensboro, United States InsurSolv,LLC Full time

    About the job Insurance Field Inspector - Independent Contractor - Forsyth Commercialand Residential Independent Contractor for Insurance Loss Control. IndependentContractors Duties: Thephysical characteristics, exterior measurements, general conditions,photographs, unusual hazards and recommendations associated with aproperty are part of our comprehensive...

  • Commercial Insurance Inspector-

    Found in: Talent US C2 - 1 week ago

    Greensboro, United States exl Full time

    Commercial Insurance Inspector- (Winston-Salem / Greensboro / Burlington / High Point, NC.) Burlington, NC, USA ● Greensboro, NC, USA ● High Point, NC, USA ● Winston-Salem, NC, USA Req #15471 Friday, April 26, 2024 The Company Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value...

  • Coatings & Plating Technician

    6 days ago

    Greensboro, United States TAT Technologies Ltd Full time

    Job DescriptionJob DescriptionPiedmont Aviation Component Services, a subsidiary of TAT Technologies, is looking for qualified Coatings & Plating Technician. This tech will set-up, operate, and monitor plating processes/machines to coat metal products with chromium, cadmium or other metal to protect surfaces used in the aviation industry. Positions available...

  • Technical Director of Flight Test Engineering

    3 weeks ago

    Greensboro, United States Honda Aircraft Company Full time

    General SummaryTechnical Director of Flight Test Engineering is responsible for planning and managing engineering aspects of flight and ground testing as part of the development lifecycle of our product. This includes developing and implementing testing strategies and procedures, Integrated Master Schedules and budgets; headcount analyses and plans;...

  • Technical Director of Flight Test Engineering

    Found in: Appcast Linkedin GBL C2 - 3 weeks ago

    Greensboro, United States Honda Aircraft Company Full time

    General SummaryTechnical Director of Flight Test Engineering is responsible for planning and managing engineering aspects of flight and ground testing as part of the development lifecycle of our product. This includes developing and implementing testing strategies and procedures, Integrated Master Schedules and budgets; headcount analyses and plans;...

  • Technical Director of Flight Test Engineering

    Found in: Appcast US C2 - 3 weeks ago

    Greensboro, United States Honda Aircraft Company Full time

    General SummaryTechnical Director of Flight Test Engineering is responsible for planning and managing engineering aspects of flight and ground testing as part of the development lifecycle of our product. This includes developing and implementing testing strategies and procedures, Integrated Master Schedules and budgets; headcount analyses and plans;...

  • Maintenance Director

    3 weeks ago

    Greensboro, United States Navion Senior Solutions Full time

    Job DescriptionJob DescriptionRichland Square, a community of Navion Senior Solutions located in Greensboro, NC, is seeking a Maintenance Director to join its rapidly growing team. A great Maintenance Director will have a solid understanding of plumbing and electrical systems as well as carpentry and other crafts. They will be well-versed in all maintenance...

  • Coatings & Plating Technician

    Found in: Resume Library US A2 - 1 week ago

    Greensboro, North Carolina, United States TAT Technologies Ltd Full time

    Piedmont Aviation Component Services, a subsidiary of TAT Technologies, is looking for qualified Coatings & Plating Technician. This tech will set-up, operate, and monitor plating processes/machines to coat metal products with chromium, cadmium or other metal to protect surfaces used in the aviation industry. Positions available on 1st shift (Monday -...

  • Civil Engineer

    5 days ago

    Greensboro, United States Byrdson Services, LLC Full time

    Job DescriptionJob DescriptionCivil Engineer (Licensed)Company Overview:Byrdson Services is a leading construction company that delivers exceptional projects across North Carolina. We specialize in residential construction. Our team of professionals strives to uphold the highest standards of quality, safety, and client satisfaction in every...

  • Civil Engineer

    4 days ago

    Greensboro, United States Byrdson Services, LLC Full time

    Job DescriptionJob DescriptionCivil Engineer (Licensed)Company Overview:Byrdson Services is a leading construction company that delivers exceptional projects across North Carolina. We specialize in residential construction. Our team of professionals strives to uphold the highest standards of quality, safety, and client satisfaction in every...

  • Maintenance Director

    Found in: Resume Library US A2 - 2 weeks ago

    Greensboro, North Carolina, United States Navion Senior Solutions Full time

    Richland Square, a community of Navion Senior Solutions located in Greensboro, NC, is seeking a Maintenance Director to join its rapidly growing team. A great Maintenance Director will have a solid understanding of plumbing and electrical systems as well as carpentry and other crafts. They will be well-versed in all maintenance process and health and...

  • Electrical Project Manager

    2 weeks ago

    Greensboro, United States R.D. Graham Electric, LLC Full time

    Job DescriptionJob DescriptionPurpose and Function: The purpose of this position is to support field operations by ensuring coordination of information and proper, timely material ordering to meet the project schedule.Duties which are expected to be performed include but are not limited to:Ensure all permits and plan reviews are coordinated in a timely...

  • Corporate Aircraft Mechanic

    Found in: Lensa US P 2 C2 - 2 weeks ago

    Greensboro, United States American Honda Motor Full time

    General Summary: The Aircraft Technician, GSO Service Center works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems. Duties and Responsibilities: Performs scheduled and unscheduled inspections,...

  • Carpenter

    2 weeks ago

    Greensboro, United States Staffing Logistics Full time

    Job DescriptionJob DescriptionSummary/ObjectiveThe Carpenter performs tasks involving physical labor on all projects and will support the Lead Carpenter and the Project Manager. In this role, the Carpenter may perform general carpentry tasks as well as other basic remodeling tasks including, but not limited to, painting and finishing, drywall work, and...