Aviation Safety Inspector

Found in: beBee jobs US - 7 days ago

Wichita Falls, Texas, United States Department Of Transportation Full time
Summary

The incumbent of this position is assigned to the Flight Standards Service. The incumbent serves as the primary operations interface between assigned air carriers, air operators, air agencies, airmen, designees and the Federal Aviation Administration (FAA). Has program responsibility to assure that assigned organizations meet Title 14 Code of Federal Regulation (14 CFR) with respect to general aviation operations programs.



Duties

The aviation safety inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work.. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

Some FG-14 assignments involve service wide responsibility for application of expert knowledge of flight operations for advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft.

ASIs at the FG-14 level establish technical procedures and performance indexes and review complete flight operations programs for leaders in the aviation industry, or organizations of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity.

The following assignments are illustrative:

1.As a Service wide expert on a particular type of advanced multiengine turbojet aircraft:

-- Advises other inspectors of major changes in the operation of the aircraft;

-- Standardizes procedures and judgments used by inspectors to evaluate the operation of the aircraft;

-- Evaluates new training methods and equipment (e.g., simulators) for initial certification;

-- Serves on national boards that determine the minimum equipment necessary to operate a particular type of aircraft safely; and

-- Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the aircraft. Develops plans to resolve problems.

2.As the principal representative in regulatory oversight of general aviation and air carrier activities, exercises certificate authority over extensive and complex operations. Analyzes flight operations involving large fleets of turbojet aircraft engaged in passenger and freight service. (By comparison, FG-13 employees exercise certificate authority over less complex operations or perform major portions of the certification, inspection, and surveillance under the direction of FG-14 inspectors.)

3.Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as air carriers, executive and/or industrial operators, designees, and flight schools when the activities monitored equate collectively to a major air carrier in terms of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors.

FG-14 employees develop and evaluate flight operations programs for organizations which utilize the newest, most complex aircraft, systems, and equipment. Because of organizational complexity or technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy- setting level.

Performs other duties as required.

  • Aviation Safety Inspector

    Found in: beBee jobs US - 2 weeks ago

    Wichita Falls, Texas, United States Department Of Transportation Full time

    Summary The Fleet Training Program Manager (FTPM) serves as the primary operations interface between the training center, its training center evaluators (TCEs), ground/flight instructors, and the Federal Aviation Administration (FAA). Duties Assures that the training center continuously meets the standards prescribed by the applicable Federal Aviation...

  • Line Service Technician

    Found in: Lensa US P 2 C2 - 7 days ago

    Wichita, United States BBA Aviation Plc. Full time

    Job ID 10116Date Posted 03/15/2024Location Wichita, KansasAirport Wichita Dwight D. Eisenhower National AirportCompany Signature Flight Support LLCJob Type Full timeJob Level StandardJob DescriptionShift Availability Needed: 1:00pm - 9:00pm (Second Shift)Signature Aviation is a market leading global aviation services provider with over 220 locations and...

  • Quality Inspector

    2 weeks ago

    Wichita, United States AAA USA Inc Full time

    Job DescriptionJob DescriptionDescription:About the Company:We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do...

  • Consumer Safety Inspector

    Found in: beBee jobs US - 2 weeks ago

    Cannon Falls, Minnesota, United States Department Of Agriculture Full time

    Summary $5,000 Sign on Bonus, Creditable Service for Annual Leave Accrual, Public Service Loan Forgiveness Program, and Referral Bonus Awards are available. Click Learn more about this agency below.Shifts and species will vary based on assignment. For add'l information call Dr. Jason Schewe @ Employee will primarily work in one plant but may be detailed to...

  • Consumer Safety Inspector

    Found in: beBee jobs US - 2 weeks ago

    Thief River Falls, Minnesota, United States Department Of Agriculture Full time

    Summary $5,000 Sign on Bonus, Creditable Service for Annual Leave Accrual, Public Service Loan Forgiveness Program, and Referral Bonus Awards are available. Click Learn more about this agency below.Species: Poultry.Shift may vary.For more info: Dr. Megan Visger @ Employee may be detailed to any shift at any plant in the Des Moines District. DutiesYOU...

  • State Safety

    7 days ago

    Falls Church, United States Super Lube Inc Full time

    Job DescriptionJob DescriptionWe are currently seeking ​a State Safety & Emissions Inspector (Falls Church, VA) to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles.Responsibilities:Perform Virginia safety inspections and pass or fail vehicle according to State GuidelinesPerform emissions test on...

  • Special Inspector

    Found in: Talent US C2 - 2 weeks ago

    Twin Falls, United States IDAHO AGC BENEFIT PLAN TRUST Full time

    STRATA provides clients with professional geotechnical engineering, construction inspection and materials testing (CMT) services. We have served the intermountain west for over 40 years. Currently, STRATA has offices located in Boise, Hayden, Twin Falls, Pocatello, and Idaho Falls, Idaho; and Spokane, Washington. We currently have a Special Inspector...

  • Quality Inspector

    Found in: Resume Library US A2 - 6 days ago

    Wichita, Kansas, United States The Atlas Group Full time

    Overview: Job Summary: As an Inspector at WASI, you will play a crucial role in ensuring the integrity and safety of our products. You will be responsible for conducting thorough inspections and verification of components, assemblies, and systems to ensure they meet the highest quality standards and regulatory requirements. Responsibilities: Key...

  • OSP Inspector I

    Found in: Jooble US O C2 - 7 days ago

    Great Falls, MT, United States MOUNTAIN, LTD. Full time

    MOUNTAIN, LTD. has an opening for an OSP Inspector in the Great Falls, MT area. Since 1979, MOUNTAIN, LTD. has successfully created and supported turnkey engineering solutions for traditional and wireless telecom providers across the United States. We are a national leader in the industry, providing high-quality engineering, on-time service delivery, and...

  • Quality Inspector Mechanical

    7 days ago

    Wichita, United States SQA Services Full time

    Job DescriptionJob DescriptionAircrafts Rock! If you agree and would like to work with one of the most exciting names in the game, then we want to hear from you. If you have a ‘quality eye’ and have what it takes to keep up with the best in the business, this is your program!Join us and embark on a journey where your enthusiasm for aviation can take...

  • Quality Inspector Mechanical

    7 days ago

    Wichita, United States SQA Services Full time

    Job DescriptionJob DescriptionAircrafts Rock! If you agree and would like to work with one of the most exciting names in the game, then we want to hear from you. If you have a ‘quality eye’ and have what it takes to keep up with the best in the business, this is your program!Join us and embark on a journey where your enthusiasm for aviation can take...

  • Environmental Monitoring Inspector

    7 days ago

    Wichita, United States CareerBuilder Full time

    The Environmental Monitoring (EM) Inspector is responsible for coordinating monitoring activities, sample as needed, train EM Techs and others as identified. Role Responsibilities : Responsible for coordinating activities of EM techs, maintaining a safe work environment, working safely and accountable for supporting all health, safety, and environmental...

  • Compliance Inspector

    7 days ago

    Cedar Falls, United States Creators Wanted Full time

    Prime360 is one of the largest and fastest growing pallet management services companies, offering the entire nation including Canada and Mexico a wide range of services. Our goal is to provide the finest-quality services to our customers, and to do this more efficiently and economically than our competitors. Our products are all made in the United States and...

  • Compliance Inspector

    7 days ago

    Cedar Falls, United States CareerBuilder Full time

    Prime360 is one of the largest and fastest growing pallet management services companies, offering the entire nation including Canada and Mexico a wide range of services. Our goal is to provide the finest-quality services to our customers, and to do this more efficiently and economically than our competitors. Our products are all made in the United States and...

  • Quality Inspector Mechanical

    7 days ago

    Wichita, United States SQA Services Full time

    Job DescriptionJob DescriptionAircrafts Rock! If you agree and would like to work with one of the most exciting names in the game, then we want to hear from you. If you have a ‘quality eye’ and have what it takes to keep up with the best in the business, this is your program!Join us and embark on a journey where your enthusiasm for aviation can take...

  • Quality Inspector Mechanical- Aerospace

    7 days ago

    Wichita, United States SQA Services Full time

    Job DescriptionJob DescriptionUrgently Hiring! Apply today for serious consideration! Aircrafts Rock! If you agree and would like to work with one of the most exciting names in the game, then we want to hear from you. If you have a ‘quality eye’ and have what it takes to keep up with the best in the business, this is your program!Join us and embark on a...

  • Loss Control/Insurance Field Inspector

    6 days ago

    Great Falls, United States InsurSolv,LLC Full time

    About the job Loss Control/Insurance Field Inspector - Great Falls Commercial Independent Contractor for Insurance Loss Control. Independent Contractors Duties: The physical characteristics, exterior measurements, general conditions, photographs, unusual hazards and recommendations associated with a property are part of our comprehensive reports that...

  • Quality Inspector

    2 weeks ago

    Wichita, United States Wescon Plastics Full time

    Job DescriptionJob DescriptionWescon Plastics is a custom injection molder located in Wichita, Kansas, operating since 1972. Wescon Plastics specializes in engineered resins to make tight-tolerance products. Our tradition of total and complete commitment to quality can be seen throughout all phases of the company. We put our customers' needs first and...

  • Aircraft Turbine Engine Technician

    Found in: Resume Library US A2 - 4 days ago

    Wichita, Kansas, United States Segula Technologies Full time

    Job Description Adhere to General Work Requirements Perform periodic inspections of engines and aircraft, for example, thrust reversers (TR), Major Periodic Inspection (MPI), Hot Section Inspection (HSI) in accordance with appropriate maintenance manuals Troubleshoot and repair basic engine and related aircraft problems at on-site and off-site...

  • Loss Control/Insurance Field Inspector

    7 days ago

    Great Falls, United States CareerBuilder Full time

    Job Description Job Description Commercial Independent Contractor for Insurance Loss Control. Independent Contractors Duties: The physical characteristics, exterior measurements, general conditions, photographs, unusual hazards and recommendations associated with a property are part of our comprehensive reports that summarize the observable hazards...

  • Senior Safety Manager

    7 days ago

    Wichita, United States McCownGordon Construction Full time

    ** Senior Safety Manager - Wichita, KS** **Job Category****:** SAFETY **Requisition Number****:** SENIO001322 Showing 1 location **Job Details** **Description** **POSITION SUMMARY** Manages the risk management program for designated projects. Helps ensure government and company compliance. Manages the development and implementation of job-specific plans,...