PLC Controls Engineer

2 months ago


New Albany, United States ACL Digital Full time

Title: Associate Mfg Systems Engineer

Location: New Albany, OH

Duration: 6+months to begin with


Day shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)


Responsibilities:

• Take part in the coordination of tech support on engineering, regulatory, compliance, calibration, quality, microbial/environmental, technical cleaning, validation, electrical and process automation issues.

• Assist during regulatory agency inspections. Provide technical support in response to the FDA and other regulatory agencies.

• Complete advanced maintenance activities or operate and monitor sophisticated plant support equipment in accordance with CFRs, cGMPs, SOPs, job plans and policies. Investigate complex issues or problems through the mentorship of experienced staff.

• Assist the team with maintaining an up-to-date working spare parts inventory system for the equipment/systems the team.

• Evaluate the current maintenance procedures and assist in the changes to optimize the maintenance program, trouble shoot and repair equipment/system failures.

• Interpret and review utility, process system/ equipment, plumbing, ductwork plans, architectural, and HVAC P&ID’s.

• Support Operations in Non-Standard shifts that includes weekends and/or holidays as determined by business.


Basic Qualifications:

• High school diploma / GED and 6 years of Technical Engineering experience OR

• Associate’s degree and 4 years of Technical Engineering experience OR

• Bachelor’s degree


Preferred Qualifications:

• Educational background in Mechatronics, Computer Science, Electronic Engineering Technology, Computer Engineering or Electrical Engineering

• Understanding in PLC, Computer Serialization, Packaging Equipment, Inspection System

• SCADA/PLC Control System experience in Pharmaceutical, Medical Device or Biotechnology Industry

• Other Automated Control Systems to be supported are: Siemens and Rockwell HMI’s, Cognex Vision System, Sensor and Systech Serialization

• Experience with automation system hardware and software support, including installation

• Excellent organizational, project management, problem solving and technical writing capability

• Strong communication: verbal / written, collaboration, influencing and facilitation

• MS Office: Word, Excel, Power Point


  • PLC Controls Engineer

    4 weeks ago


    New Albany, United States ACL Digital Full time

    Title: Associate Mfg Systems EngineerLocation: New Albany, OHDuration: 6+months to begin with Day shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)Responsibilities: • Take part in the coordination of tech support on engineering, regulatory, compliance, calibration, quality,...


  • Albany, New York, United States ACL Digital Full time

    Job Title: PLC Controls EngineerJoin ACL Digital as a PLC Controls Engineer and take part in the coordination of technical support on engineering, regulatory, compliance, calibration, quality, microbial/environmental, technical cleaning, validation, electrical and process automation issues.Responsibilities:Assist during regulatory agency inspections and...


  • New Albany, Ohio, United States ACL Digital Full time

    Job Title: Associate Mfg Systems EngineerLocation: New Albany, OHDuration: 6+ monthsShift: Day shift (6:30 am - 3:00 pm) for first 3-6 months, then 2nd shift (6:00 pm - 6:00 am)Job SummaryWe are seeking an experienced Associate Mfg Systems Engineer to join our team at ACL Digital. The successful candidate will be responsible for coordinating technical...

  • PLC Control Specialist

    2 months ago


    New York, New York, United States KH Manufacturing - North America Full time

    Job OverviewWe are seeking a skilled PLC Control Specialist to join our team at KH Manufacturing - North America. The ideal candidate will possess strong electrical troubleshooting skills, experience with electrical schematics, and a background in industrial and manufacturing engineering.Key ResponsibilitiesUtilize electrical troubleshooting skills to...


  • New York, New York, United States KH Manufacturing - North America Full time

    Job OverviewWe are seeking a skilled PLC Control Tech to join our team at KH Manufacturing - North America. The ideal candidate will have strong electrical troubleshooting skills, experience with electrical schematics, and a background in industrial and manufacturing engineering.Key ResponsibilitiesDiagnose and repair issues with industrial automation...

  • Control Engineer

    5 months ago


    New Albany, United States ACL Digital Full time

    Job Title: Electrical Control EngineerLocation: New Albany, OHDuration: 12 Months contractDescription:FULLY ONSITE NEW ALBANY, OHDay shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)Top 3 Must Have Skill Sets:PLC ExperienceElectrical TroubleshootingTechnical Writing...

  • Controls Engineer

    1 month ago


    New Albany, Ohio, United States ACL Digital Full time

    {"title": "Manufacturing Systems Engineer", "subtitle": "Join ACL Digital", "content": "As a Manufacturing Systems Engineer at ACL Digital, you will play a critical role in ensuring the smooth operation of our manufacturing processes. Your technical expertise will be essential in optimizing system performance, troubleshooting issues, and implementing process...


  • New Freedom, Pennsylvania, United States Johnson Controls Full time

    Job Title: Principal Electrical Controls EngineerJohnson Controls is seeking a highly skilled Principal Electrical Controls Engineer to lead the development of power electronics and VSD control systems for embedded processors using MATLAB/SIMULINK.Key Responsibilities:Design, test, and sustain electronic Printed Circuit Board (PCB) assemblies and...

  • Control Engineer

    2 months ago


    New Albany, United States Belcan Full time

    Job Title: Control EngineerLocation: New Albany, OH USA 43054Duration: 12 Months Contract (Potential Temp to Perm)Pay Rate: $40/hr.Shift Time: 1st Shift (Mon-Fri; 6:30 AM – 3 PM)Day shift- 6:30 am - 3pm for first 3-6 months then will transition to 2nd shift 6pm- 6 am (a few days on few days off)Responsibilities:In this role you will provide technical...


  • New Albany, Ohio, United States Belcan Full time

    Job Title: Control EngineerLocation: New Albany, OH USADuration: 12 Months Contract (Potential Temp to Perm)Pay Rate: $40/hr.Shift Time: 1st Shift (Mon-Fri; 6:30 AM – 3 PM)Day shift- 6:30 am - 3pm for first 3-6 months then will transition to 2nd shift 6pm- 6 am (a few days on few days off)Job SummaryWe are seeking a highly skilled Control Engineer to...


  • Albany, New York, United States Amcor plc Full time

    Job Title: Senior Process EngineerWe are seeking a highly skilled Senior Process Engineer to join our team at Amcor plc. As a key member of our operations team, you will be responsible for driving manufacturing excellence and process improvement initiatives across our global facilities.About the Role:Lead process engineering efforts to achieve advanced...

  • Controls Engineer

    1 month ago


    New Albany, United States ACL Digital Full time

    Job Title – Associate Mfg Systems EngineerContract RoleLocation – New Albany, OH(onsite)Day shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)Pre-screening questions required- All resumes must have responses to the below pre-screening questions from the job seeker: 1. What PLCs and HMIs do...

  • Controls Engineer

    1 month ago


    New Albany, United States ACL Digital Full time

    Job Title – Associate Mfg Systems EngineerContract RoleLocation – New Albany, OH(onsite)Day shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)Pre-screening questions required- All resumes must have responses to the below pre-screening questions from the job seeker: 1. What PLCs and HMIs do...

  • Controls Engineer

    3 days ago


    New Albany, United States ACL Digital Full time

    Job Title – Associate Mfg Systems EngineerContract RoleLocation – New Albany, OH(onsite) Day shift- 630 am - 3 pm for first 3-6 months then will transition to 2nd shift 6 pm- 6 am (a few days on few days off)Pre-screening questions required- All resumes must have responses to the below pre-screening questions from the job seeker: 1. What PLCs and HMIs do...


  • New Albany, Ohio, United States Belcan Full time

    Job Title: Control EngineerLocation: New Albany, OH USADuration: 12 Months Contract (Potential Temp to Perm)Pay Rate: $40/hr.Shift Time: 1st Shift (Mon-Fri; 6:30 AM - 3 PM)Responsibilities:Provide technical engineering support for system/equipment optimization strategies, upgrades, replacements, and modifications.Evaluate and determine if utility systems,...


  • Albany, New York, United States Lion Group Full time

    Job SummaryThe PLC Support Engineer, Training Solutions is responsible for designing and assisting in the installation of PLC systems and instruments to control live fire training structures for first responders.Key ResponsibilitiesDesign and assist in the installation of PLC systems and instruments to control live fire training structures for first...


  • New Albany, Ohio, United States Amcor plc Full time

    Job Title: Senior Process EngineerWe are seeking a highly skilled Senior Process Engineer to join our team at Amcor plc. As a key member of our operations team, you will be responsible for driving process excellence and improving manufacturing efficiency.Key Responsibilities:Lead process improvement initiatives to enhance manufacturing efficiency and...


  • New Albany, Ohio, United States Amcor plc Full time

    Job Title: Senior Process EngineerWe are seeking a highly skilled Senior Process Engineer to join our team at Amcor plc. As a key member of our operations team, you will be responsible for driving process excellence and improving manufacturing efficiency across our global facilities.Key Responsibilities:Lead process improvement initiatives to enhance...


  • New Berlin, United States Russ Hadick & Associates Full time

    Russ Hadick & Associates, Inc has partnered with a Milwaukee, Wisconsin area client to help them search and qualify candidates for their Software Controls Engineering opening. PRIMARY RESPONSIBILITIES: Customizing of controls using existing software modules and standards from global automation engineering for various applications if they are proven to work...


  • New Albany, Ohio, United States ACL Digital Full time

    Job Title: Electrical Control Systems EngineerLocation: New Albany, OHDuration: 12 Months contractDescription:Fully onsite in New Albany, OHDay shift: 6:30 am - 3:00 pm for the first 3-6 months, then transitioning to 2nd shift: 6:00 pm - 6:00 am (a few days on, a few days off)Key Responsibilities:Coordinate technical support for engineering, regulatory,...